[PATCH 1/2] net: phy: add uapi/linux/mdio.h from kernel for MDIO MMD access
Michael Grzeschik
mgr at pengutronix.de
Tue Jun 30 07:01:41 EDT 2020
On Tue, Jun 30, 2020 at 12:09:57PM +0200, Ahmad Fatoum wrote:
>
>
>On 6/30/20 11:49 AM, Michael Grzeschik wrote:
>> The headerfile is used in the kernel for access of MDIO Managed Devices
>> (MMD) indirect access. Some drivers already use those device addresses.
>> We add the headerfile from the kernel and change the current users to
>> use the defines instead
>>
>> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
>> ---
>> drivers/net/phy/dp83867.c | 3 +-
>> drivers/net/phy/micrel.c | 5 +-
>> include/uapi/linux/mdio.h | 327 ++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 332 insertions(+), 3 deletions(-)
>> create mode 100644 include/uapi/linux/mdio.h
>>
>> diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
>> index b3328b7e44..6a136a76dd 100644
>> --- a/drivers/net/phy/dp83867.c
>> +++ b/drivers/net/phy/dp83867.c
>> @@ -18,9 +18,10 @@
>> #include <linux/phy.h>
>>
>> #include <dt-bindings/net/ti-dp83867.h>
>> +#include <uapi/linux/mdio.h>
>>
>> #define DP83867_PHY_ID 0x2000a231
>> -#define DP83867_DEVADDR 0x1f
>> +#define DP83867_DEVADDR MDIO_MMD_VEND2
>>
>> #define MII_DP83867_PHYCTRL 0x10
>> #define MII_DP83867_MICR 0x12
>> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
>> index 8f0b81d8fa..c9a19d166e 100644
>> --- a/drivers/net/phy/micrel.c
>> +++ b/drivers/net/phy/micrel.c
>> @@ -18,6 +18,7 @@
>> #include <linux/ethtool.h>
>> #include <linux/phy.h>
>> #include <linux/micrel_phy.h>
>> +#include <uapi/linux/mdio.h>
>>
>> /* Operation Mode Strap Override */
>> #define MII_KSZPHY_OMSO 0x16
>> @@ -179,7 +180,7 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
>> return 0;
>>
>> if (matches < numfields)
>> - newval = phy_read_mmd_indirect(phydev, reg, 2);
>> + newval = phy_read_mmd_indirect(phydev, reg, MDIO_MMD_WIS);
>> else
>> newval = 0;
>>
>> @@ -193,7 +194,7 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
>> << (field_sz * i));
>> }
>>
>> - phy_write_mmd_indirect(phydev, reg, 2, newval);
>> + phy_write_mmd_indirect(phydev, reg, MDIO_MMD_WIS, newval);
>> return 0;
>> }
>>
>> diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
>> new file mode 100644
>> index 0000000000..4bcb41c71b
>> --- /dev/null
>> +++ b/include/uapi/linux/mdio.h
>
>I'd put mdio.h into include/linux instead. We do this for the closely
>related mii.h, which in the kernel is in include/uapi/linux, but in
>barebox in include/linux.
Makes sense! Will change it in v2.
>Otherwise; Reviewed-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
Thanks!
>
>> @@ -0,0 +1,327 @@
>> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
>> +/*
>> + * linux/mdio.h: definitions for MDIO (clause 45) transceivers
>> + * Copyright 2006-2009 Solarflare Communications Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published
>> + * by the Free Software Foundation, incorporated herein by reference.
>> + */
>> +
>> +#ifndef _UAPI__LINUX_MDIO_H__
>> +#define _UAPI__LINUX_MDIO_H__
>> +
>> +#include <linux/types.h>
>> +#include <linux/mii.h>
>> +
>> +/* MDIO Manageable Devices (MMDs). */
>> +#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/
>> + * Physical Medium Dependent */
>> +#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */
>> +#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */
>> +#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */
>> +#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
>> +#define MDIO_MMD_TC 6 /* Transmission Convergence */
>> +#define MDIO_MMD_AN 7 /* Auto-Negotiation */
>> +#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
>> +#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
>> +#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
>> +
>> +/* Generic MDIO registers. */
>> +#define MDIO_CTRL1 MII_BMCR
>> +#define MDIO_STAT1 MII_BMSR
>> +#define MDIO_DEVID1 MII_PHYSID1
>> +#define MDIO_DEVID2 MII_PHYSID2
>> +#define MDIO_SPEED 4 /* Speed ability */
>> +#define MDIO_DEVS1 5 /* Devices in package */
>> +#define MDIO_DEVS2 6
>> +#define MDIO_CTRL2 7 /* 10G control 2 */
>> +#define MDIO_STAT2 8 /* 10G status 2 */
>> +#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */
>> +#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */
>> +#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */
>> +#define MDIO_PKGID1 14 /* Package identifier */
>> +#define MDIO_PKGID2 15
>> +#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
>> +#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
>> +#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */
>> +#define MDIO_PCS_EEE_ABLE2 21 /* EEE Capability register 2 */
>> +#define MDIO_PMA_NG_EXTABLE 21 /* 2.5G/5G PMA/PMD extended ability */
>> +#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */
>> +#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
>> +#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
>> +#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */
>> +#define MDIO_AN_EEE_ADV2 62 /* EEE advertisement 2 */
>> +#define MDIO_AN_EEE_LPABLE2 63 /* EEE link partner ability 2 */
>> +
>> +/* Media-dependent registers. */
>> +#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
>> +#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
>> +#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
>> + * Lanes B-D are numbered 134-136. */
>> +#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
>> +#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
>> +#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
>> +#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
>> +#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
>> +#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
>> +
>> +/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
>> +#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
>> +#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
>> +#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
>> +#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
>> +#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
>> +#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
>> +
>> +/* Control register 1. */
>> +/* Enable extended speed selection */
>> +#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
>> +/* All speed selection bits */
>> +#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
>> +#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
>> +#define MDIO_CTRL1_LPOWER BMCR_PDOWN
>> +#define MDIO_CTRL1_RESET BMCR_RESET
>> +#define MDIO_PMA_CTRL1_LOOPBACK 0x0001
>> +#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
>> +#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
>> +#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK
>> +#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK
>> +#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
>> +#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
>> +#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
>> +#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */
>> +
>> +/* 10 Gb/s */
>> +#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
>> +/* 10PASS-TS/2BASE-TL */
>> +#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04)
>> +/* 2.5 Gb/s */
>> +#define MDIO_CTRL1_SPEED2_5G (MDIO_CTRL1_SPEEDSELEXT | 0x18)
>> +/* 5 Gb/s */
>> +#define MDIO_CTRL1_SPEED5G (MDIO_CTRL1_SPEEDSELEXT | 0x1c)
>> +
>> +/* Status register 1. */
>> +#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */
>> +#define MDIO_STAT1_LSTATUS BMSR_LSTATUS
>> +#define MDIO_STAT1_FAULT 0x0080 /* Fault */
>> +#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */
>> +#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE
>> +#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT
>> +#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE
>> +#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */
>> +#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */
>> +
>> +/* Speed register. */
>> +#define MDIO_SPEED_10G 0x0001 /* 10G capable */
>> +#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */
>> +#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */
>> +#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */
>> +#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
>> +#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
>> +#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
>> +
>> +/* Device present registers. */
>> +#define MDIO_DEVS_PRESENT(devad) (1 << (devad))
>> +#define MDIO_DEVS_C22PRESENT MDIO_DEVS_PRESENT(0)
>> +#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
>> +#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
>> +#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
>> +#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
>> +#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
>> +#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC)
>> +#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN)
>> +#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
>> +#define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1)
>> +#define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2)
>> +
>> +/* Control register 2. */
>> +#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
>> +#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */
>> +#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */
>> +#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */
>> +#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */
>> +#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */
>> +#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */
>> +#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */
>> +#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */
>> +#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */
>> +#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */
>> +#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */
>> +#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */
>> +#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */
>> +#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */
>> +#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */
>> +#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
>> +#define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */
>> +#define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */
>> +#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
>> +#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
>> +#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
>> +#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */
>> +#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */
>> +
>> +/* Status register 2. */
>> +#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */
>> +#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */
>> +#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */
>> +#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */
>> +#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */
>> +#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */
>> +#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */
>> +#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */
>> +#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */
>> +#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */
>> +#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */
>> +#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */
>> +#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */
>> +#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */
>> +#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
>> +#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
>> +#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */
>> +#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */
>> +#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */
>> +#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
>> +#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
>> +
>> +/* Transmit disable register. */
>> +#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */
>> +#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */
>> +#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */
>> +#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */
>> +#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */
>> +
>> +/* Receive signal detect register. */
>> +#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */
>> +#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */
>> +#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */
>> +#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */
>> +#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */
>> +
>> +/* Extended abilities register. */
>> +#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */
>> +#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */
>> +#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */
>> +#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */
>> +#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */
>> +#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */
>> +#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
>> +#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
>> +#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
>> +#define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */
>> +
>> +/* PHY XGXS lane state register. */
>> +#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001
>> +#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002
>> +#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004
>> +#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008
>> +#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000
>> +
>> +/* PMA 10GBASE-T pair swap & polarity */
>> +#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */
>> +#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */
>> +#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */
>> +#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */
>> +#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */
>> +#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */
>> +
>> +/* PMA 10GBASE-T TX power register. */
>> +#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */
>> +
>> +/* PMA 10GBASE-T SNR registers. */
>> +/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
>> +#define MDIO_PMA_10GBT_SNR_BIAS 0x8000
>> +#define MDIO_PMA_10GBT_SNR_MAX 127
>> +
>> +/* PMA 10GBASE-R FEC ability register. */
>> +#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
>> +#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
>> +
>> +/* PCS 10GBASE-R/-T status register 1. */
>> +#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
>> +
>> +/* PCS 10GBASE-R/-T status register 2. */
>> +#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff
>> +#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
>> +
>> +/* AN 10GBASE-T control register. */
>> +#define MDIO_AN_10GBT_CTRL_ADV2_5G 0x0080 /* Advertise 2.5GBASE-T */
>> +#define MDIO_AN_10GBT_CTRL_ADV5G 0x0100 /* Advertise 5GBASE-T */
>> +#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
>> +
>> +/* AN 10GBASE-T status register. */
>> +#define MDIO_AN_10GBT_STAT_LP2_5G 0x0020 /* LP is 2.5GBT capable */
>> +#define MDIO_AN_10GBT_STAT_LP5G 0x0040 /* LP is 5GBT capable */
>> +#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */
>> +#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */
>> +#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */
>> +#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */
>> +#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */
>> +#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
>> +#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
>> +
>> +/* EEE Supported/Advertisement/LP Advertisement registers.
>> + *
>> + * EEE capability Register (3.20), Advertisement (7.60) and
>> + * Link partner ability (7.61) registers have and can use the same identical
>> + * bit masks.
>> + */
>> +#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
>> +#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
>> +/* Note: the two defines above can be potentially used by the user-land
>> + * and cannot remove them now.
>> + * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
>> + * using the previous ones (that can be considered obsolete).
>> + */
>> +#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */
>> +#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */
>> +#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */
>> +#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */
>> +#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */
>> +#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */
>> +#define MDIO_EEE_40GR_FW 0x0100 /* 40G R fast wake */
>> +#define MDIO_EEE_40GR_DS 0x0200 /* 40G R deep sleep */
>> +#define MDIO_EEE_100GR_FW 0x1000 /* 100G R fast wake */
>> +#define MDIO_EEE_100GR_DS 0x2000 /* 100G R deep sleep */
>> +
>> +#define MDIO_EEE_2_5GT 0x0001 /* 2.5GT EEE cap */
>> +#define MDIO_EEE_5GT 0x0002 /* 5GT EEE cap */
>> +
>> +/* 2.5G/5G Extended abilities register. */
>> +#define MDIO_PMA_NG_EXTABLE_2_5GBT 0x0001 /* 2.5GBASET ability */
>> +#define MDIO_PMA_NG_EXTABLE_5GBT 0x0002 /* 5GBASET ability */
>> +
>> +/* LASI RX_ALARM control/status registers. */
>> +#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
>> +#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
>> +#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
>> +#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
>> +#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
>> +
>> +/* LASI TX_ALARM control/status registers. */
>> +#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
>> +#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
>> +#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
>> +#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
>> +#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
>> +#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
>> +
>> +/* LASI control/status registers. */
>> +#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
>> +#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
>> +#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
>> +
>> +/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
>> +
>> +#define MDIO_PHY_ID_C45 0x8000
>> +#define MDIO_PHY_ID_PRTAD 0x03e0
>> +#define MDIO_PHY_ID_DEVAD 0x001f
>> +#define MDIO_PHY_ID_C45_MASK \
>> + (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
>> +
>> +static inline __u16 mdio_phy_id_c45(int prtad, int devad)
>> +{
>> + return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
>> +}
>> +
>> +#endif /* _UAPI__LINUX_MDIO_H__ */
>>
>
>--
>Pengutronix e.K. | |
>Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20200630/e787f216/attachment-0001.sig>
More information about the barebox
mailing list