[PATCH 2/4] ARM: stm32mp: dts: extend now upstream stm32mp157c-lxa-mc1.dts
Ahmad Fatoum
a.fatoum at pengutronix.de
Tue Jun 23 09:25:19 EDT 2020
With the recent v5.8-rc1 device tree sync, we can drop everything but
the barebox-specific parts from the barebox device tree.
The rest now comes from the upstream device tree.
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
arch/arm/dts/stm32mp157c-lxa-mc1.dts | 2 +-
arch/arm/dts/stm32mp157c-lxa-mc1.dtsi | 362 --------------------------
arch/arm/dts/stm32mp15xx-osd32.dtsi | 229 ----------------
3 files changed, 1 insertion(+), 592 deletions(-)
delete mode 100644 arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
delete mode 100644 arch/arm/dts/stm32mp15xx-osd32.dtsi
diff --git a/arch/arm/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/dts/stm32mp157c-lxa-mc1.dts
index 57baaf4005d2..f89c0852809e 100644
--- a/arch/arm/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/dts/stm32mp157c-lxa-mc1.dts
@@ -3,7 +3,7 @@
* Copyright (C) 2020 Ahmad Fatoum, Pengutronix
*/
-#include "stm32mp157c-lxa-mc1.dtsi"
+#include <arm/stm32mp157c-lxa-mc1.dts>
#include "stm32mp151.dtsi"
/ {
diff --git a/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi b/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
deleted file mode 100644
index 6603cf280eb2..000000000000
--- a/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-/*
- * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
- * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
- */
-
-/dts-v1/;
-
-#include <arm/stm32mp157.dtsi>
-#include "stm32mp15xx-osd32.dtsi"
-#include <arm/stm32mp15xxac-pinctrl.dtsi>
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "Linux Automation MC-1 board";
- compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157";
-
- aliases {
- ethernet0 = ðernet0;
- mmc0 = &sdmmc1;
- mmc1 = &sdmmc2;
- serial0 = &uart4;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 31 63 95 127 159 191 223 255>;
- default-brightness-level = <7>;
- power-supply = <®_5v2>; /* 3V3_BACKLIGHT */
- };
-
- chosen {
- stdout-path = &uart4;
- };
-
- led-act {
- compatible = "gpio-leds";
-
- led-green {
- label = "mc1:green:act";
- gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- led-rgb {
- compatible = "pwm-leds";
-
- led-red {
- label = "mc1:red:rgb";
- pwms = <&leds_pwm 1 1000000 0>;
- max-brightness = <255>;
- active-low;
- };
-
- led-green {
- label = "mc1:green:rgb";
- pwms = <&leds_pwm 2 1000000 0>;
- max-brightness = <255>;
- active-low;
- };
-
- led-blue {
- label = "mc1:blue:rgb";
- pwms = <&leds_pwm 3 1000000 0>;
- max-brightness = <255>;
- active-low;
- };
- };
-
- panel: panel {
- compatible = "edt,etm0700g0edh6", "simple-panel";
- backlight = <&backlight>;
- enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
- power-supply = <®_3v3>;
-
- port {
- panel_input: endpoint {
- remote-endpoint = <<dc_ep0_out>;
- };
- };
- };
-
- reg_3v3: regulator_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&v3v3>;
- };
-
- /* supplied by either debug board or PoE */
- reg_5v2: regulator_5v2 {
- compatible = "regulator-fixed";
- regulator-name = "5V2";
- regulator-min-microvolt = <5200000>;
- regulator-max-microvolt = <5200000>;
- regulator-always-on;
- };
-};
-
-ðernet0 {
- pinctrl-names = "default";
- pinctrl-0 = <ðernet0_rgmii_mc1pins_b>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy>;
- status = "okay";
-
- mdio0 {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy: ethernet-phy at 3 { /* KSZ9031RN */
- reg = <3>;
- reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
- interrupt-parent = <&gpioa>;
- interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
- rxc-skew-ps = <1860>;
- txc-skew-ps = <1860>;
- reset-assert-us = <10000>;
- reset-deassert-us = <300>;
- micrel,force-master;
- };
- };
-};
-
-&gpioz {
- gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "",
- "HWID4", "HWID5";
-};
-
-&gpu {
- status = "okay";
-};
-
-&i2c5 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_mc1pins_b>;
- clock-frequency = <400000>;
- status = "okay";
-
- touchscreen at 38 {
- compatible = "edt,edt-ft5x06";
- interrupt-parent = <&gpiod>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */
- vcc-supply = <®_3v3>;
- reg = <0x38>;
- reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */
- touchscreen-size-x = <1792>;
- touchscreen-size-y = <1024>;
- wakeup-source;
- };
-};
-
-<dc {
- pinctrl-names = "default";
- pinctrl-0 = <<dc_mc1pins_c>;
- status = "okay";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
- ltdc_ep0_out: endpoint at 0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
-};
-
-&pmic {
- regulators {
- buck4-supply = <®_5v2>; /* VIN */
- ldo2-supply = <®_5v2>; /* PMIC_LDO25IN */
- ldo5-supply = <®_5v2>; /* PMIC_LDO25IN */
- boost-supply = <®_5v2>; /* PMIC_BSTIN */
- pwr_sw2-supply = <&bst_out>; /* PMIC_SWIN */
- };
-};
-
-&sdmmc1 {
- pinctrl-names = "default", "opendrain";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
- pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
- bus-width = <4>;
- cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
- disable-wp;
- no-1-8-v;
- st,neg-edge;
- vmmc-supply = <®_3v3>;
- status = "okay";
-};
-
-&sdmmc1_b4_pins_a {
- /*
- * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
- * work, thus enable internal pull-ups.
- */
- pins1 {
- /delete-property/ bias-disable;
- bias-pull-up;
- };
- pins2 {
- /delete-property/ bias-disable;
- bias-pull-up;
- };
-};
-
-&sdmmc2 {
- pinctrl-names = "default", "opendrain";
- pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_mc1pins_b>;
- pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_mc1pins_b>;
- bus-width = <8>;
- no-1-8-v;
- no-sd;
- no-sdio;
- non-removable;
- st,neg-edge;
- vmmc-supply = <®_3v3>;
- status = "okay";
-};
-
-&timers3 {
- status = "okay";
-
- backlight_pwm: pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm3_mc1pins_b>;
- status = "okay";
- };
-};
-
-&timers5 {
- status = "okay";
-
- leds_pwm: pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm5_mc1pins_b>;
- status = "okay";
- };
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
-};
-
-&pinctrl {
- ethernet0_rgmii_mc1pins_b: mc1-rgmii-1 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
- <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
- <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
- <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
- <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
- <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
- <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins3 {
- pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
- <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
- <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
- <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
- <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
- <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
- bias-disable;
- };
- };
-
- i2c5_mc1pins_b: mc1-i2c5-1 {
- pins {
- pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
- <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- ltdc_mc1pins_c: mc1-ltdc-2 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 1, AF9)>, /* LTDC_R6 */
- <STM32_PINMUX('B', 9, AF14)>, /* LTDC_B7 */
- <STM32_PINMUX('C', 0, AF14)>, /* LTDC_R5 */
- <STM32_PINMUX('D', 3, AF14)>, /* LTDC_G7 */
- <STM32_PINMUX('D', 6, AF14)>, /* LTDC_B2 */
- <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
- <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
- <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
- <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
- <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
- <STM32_PINMUX('H', 4, AF9)>, /* LTDC_G5 */
- <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */
- <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */
- <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
- <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
- <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
- <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */
- <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */
- <STM32_PINMUX('I', 6, AF14)>, /* LTDC_B6 */
- <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */
- <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- pwm3_mc1pins_b: mc1-pwm3-1 {
- pins {
- pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- pwm5_mc1pins_b: mc1-pwm5-1 {
- pins {
- pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
- <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
- <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- sdmmc2_d47_mc1pins_b: mc1-sdmmc2-d47-1 {
- pins {
- pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
- <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
- <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
- slew-rate = <1>;
- drive-push-pull;
- bias-disable;
- };
- };
-
-};
diff --git a/arch/arm/dts/stm32mp15xx-osd32.dtsi b/arch/arm/dts/stm32mp15xx-osd32.dtsi
deleted file mode 100644
index 87508350339e..000000000000
--- a/arch/arm/dts/stm32mp15xx-osd32.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-/*
- * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
- * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
- */
-
-#include <arm/stm32mp15-pinctrl.dtsi>
-
-#include <dt-bindings/mfd/st,stpmic1.h>
-
-/ {
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mcuram2: mcuram2 at 10000000 {
- compatible = "shared-dma-pool";
- reg = <0x10000000 0x40000>;
- no-map;
- };
-
- vdev0vring0: vdev0vring0 at 10040000 {
- compatible = "shared-dma-pool";
- reg = <0x10040000 0x1000>;
- no-map;
- };
-
- vdev0vring1: vdev0vring1 at 10041000 {
- compatible = "shared-dma-pool";
- reg = <0x10041000 0x1000>;
- no-map;
- };
-
- vdev0buffer: vdev0buffer at 10042000 {
- compatible = "shared-dma-pool";
- reg = <0x10042000 0x4000>;
- no-map;
- };
-
- mcuram: mcuram at 30000000 {
- compatible = "shared-dma-pool";
- reg = <0x30000000 0x40000>;
- no-map;
- };
-
- retram: retram at 38000000 {
- compatible = "shared-dma-pool";
- reg = <0x38000000 0x10000>;
- no-map;
- };
- };
-
- reg_sip_eeprom: regulator_eeprom {
- compatible = "regulator-fixed";
- regulator-name = "sip_eeprom";
- regulator-always-on;
- };
-};
-
-&i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins_a>;
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- pmic: stpmic at 33 {
- compatible = "st,stpmic1";
- reg = <0x33>;
- interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- regulators {
- compatible = "st,stpmic1-regulators";
-
- ldo1-supply = <&v3v3>;
- ldo6-supply = <&v3v3>;
- pwr_sw1-supply = <&bst_out>;
-
- vddcore: buck1 {
- regulator-name = "vddcore";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd_ddr: buck2 {
- regulator-name = "vdd_ddr";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd: buck3 {
- regulator-name = "vdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- st,mask-reset;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- v3v3: buck4 {
- regulator-name = "v3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-over-current-protection;
- regulator-initial-mode = <0>;
- };
-
- v1v8_audio: ldo1 {
- regulator-name = "v1v8_audio";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO1 0>;
-
- };
-
- v3v3_hdmi: ldo2 {
- regulator-name = "v3v3_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO2 0>;
-
- };
-
- vtt_ddr: ldo3 {
- regulator-name = "vtt_ddr";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <750000>;
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- vdd_usb: ldo4 {
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- interrupts = <IT_CURLIM_LDO4 0>;
- };
-
- vdda: ldo5 {
- regulator-name = "vdda";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- interrupts = <IT_CURLIM_LDO5 0>;
- regulator-boot-on;
- };
-
- v1v2_hdmi: ldo6 {
- regulator-name = "v1v2_hdmi";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO6 0>;
-
- };
-
- vref_ddr: vref_ddr {
- regulator-name = "vref_ddr";
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- bst_out: boost {
- regulator-name = "bst_out";
- interrupts = <IT_OCP_BOOST 0>;
- };
-
- vbus_otg: pwr_sw1 {
- regulator-name = "vbus_otg";
- interrupts = <IT_OCP_OTG 0>;
- regulator-active-discharge;
- };
-
- vbus_sw: pwr_sw2 {
- regulator-name = "vbus_sw";
- interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
- };
- };
-
- onkey {
- compatible = "st,stpmic1-onkey";
- interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
- interrupt-names = "onkey-falling", "onkey-rising";
- };
-
- pmic_watchdog: watchdog {
- compatible = "st,stpmic1-wdt";
- status = "disabled";
- };
- };
-
- sip_eeprom: eeprom at 50 {
- compatible = "atmel,24c32";
- vcc-supply = <®_sip_eeprom>;
- reg = <0x50>;
- };
-};
-
-&ipcc {
- status = "okay";
-};
-
-&m4_rproc {
- memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
- <&vdev0vring1>, <&vdev0buffer>;
- mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
- mbox-names = "vq0", "vq1", "shutdown";
- interrupt-parent = <&exti>;
- interrupts = <68 1>;
- status = "okay";
-};
-
-&rng1 {
- status = "okay";
-};
--
2.27.0
More information about the barebox
mailing list