[PATCH v2 1/3] mci: sdhci: atmel: don't print errors on command timeouts

[Ahmad Fatoum]

Time outs can be expected, e.g. when probing whether a card is a MMC
one. The core handles it, so don't have the driver print an error.

While at it, simplify the error handling. We don't need to read the
status more than once and returning -EPERM on non-timeout is what the
other drivers are doing.

Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
v1 -> v2:
  no change
---
 drivers/mci/atmel-sdhci-common.c | 40 ++++++++++++++++++--------------
 1 file changed, 22 insertions(+), 18 deletions(-)

diff --git a/drivers/mci/atmel-sdhci-common.c b/drivers/mci/atmel-sdhci-common.c
index b9524622620f..fff4468d71e8 100644
--- a/drivers/mci/atmel-sdhci-common.c
+++ b/drivers/mci/atmel-sdhci-common.c
@@ -83,10 +83,10 @@ exit:
 static int at91_sdhci_wait_for_done(struct at91_sdhci *host, u32 mask)
 {
 	struct sdhci *sdhci = &host->sdhci;
-	u16 status;
+	u32 status;
 	int ret;
 
-	ret = sdhci_read16_poll_timeout(sdhci, SDHCI_INT_NORMAL_STATUS, status,
+	ret = sdhci_read32_poll_timeout(sdhci, SDHCI_INT_STATUS, status,
 					(status & mask) == mask || (status & SDHCI_INT_ERROR),
 					USEC_PER_SEC);
 
@@ -95,13 +95,15 @@ static int at91_sdhci_wait_for_done(struct at91_sdhci *host, u32 mask)
 		return ret;
 	}
 
+	if (status & SDHCI_INT_TIMEOUT)
+		return -ETIMEDOUT;
+
 	if (status & SDHCI_INT_ERROR) {
-		pr_err("SDHCI_INT_ERROR: 0x%08x\n",
-			sdhci_read16(sdhci, SDHCI_INT_ERROR_STATUS));
+		pr_err("SDHCI_INT_STATUS: 0x%08x\n", status);
 		return -EPERM;
 	}
 
-	return status;
+	return status & 0xFFFF;
 }
 
 int at91_sdhci_send_command(struct at91_sdhci *host, struct mci_cmd *cmd,
@@ -109,7 +111,8 @@ int at91_sdhci_send_command(struct at91_sdhci *host, struct mci_cmd *cmd,
 {
 	unsigned command, xfer;
 	struct sdhci *sdhci = &host->sdhci;
-	u32 mask, status, state;
+	u32 mask, state;
+	int status;
 	int ret;
 
 	/* Wait for idle before next command */
@@ -147,28 +150,29 @@ int at91_sdhci_send_command(struct at91_sdhci *host, struct mci_cmd *cmd,
 	sdhci_write16(sdhci, SDHCI_COMMAND, command);
 
 	status = at91_sdhci_wait_for_done(host, mask);
-	if (status >= 0 && (status & (SDHCI_INT_ERROR | mask)) == mask) {
-		sdhci_read_response(sdhci, cmd);
-		sdhci_write32(sdhci, SDHCI_INT_STATUS, mask);
-
-		if (data)
-			sdhci_transfer_data(sdhci, data);
+	if (status < 0)
+		goto error;
 
-		udelay(1000);
+	sdhci_read_response(sdhci, cmd);
+	sdhci_write32(sdhci, SDHCI_INT_STATUS, mask);
 
-		status = sdhci_read32(sdhci, SDHCI_INT_STATUS);
-		sdhci_write32(sdhci, SDHCI_INT_STATUS, ~0U);
+	if (data)
+		sdhci_transfer_data(sdhci, data);
 
-		return 0;
-	}
+	udelay(1000);
 
 	status = sdhci_read32(sdhci, SDHCI_INT_STATUS);
 	sdhci_write32(sdhci, SDHCI_INT_STATUS, ~0U);
 
+	return 0;
+
+error:
+	sdhci_write32(sdhci, SDHCI_INT_STATUS, ~0U);
+
 	sdhci_reset(sdhci, SDHCI_RESET_CMD);
 	sdhci_reset(sdhci, SDHCI_RESET_DATA);
 
-	return status & SDHCI_INT_TIMEOUT ? -ETIMEDOUT : -ECOMM;
+	return status;
 }
 
 static void at91_sdhci_set_power(struct at91_sdhci *host, unsigned vdd)
-- 
2.27.0