[PATCH v2 0/2] ARM: i.MX: Add support for IMX7 based board

[Sascha Hauer]

On Tue, Aug 04, 2020 at 11:41:56PM +0200, Anees Rehman wrote:
> The first patch adds support for the IMX7 to load image from SD/MMC similar to
> IMX6 and IMX8.
> 
> The second patch adds support for Atlas Copco's IXB tool which comes with
> IMX7D, 1GB lpddr2 and has most of the interfaces supported by the SoC.
> This patch also shows booting IMX7 without a static DCD file which allows
> to have a single barebox image on multiple revisions of the same board
> (different memory chips).
> 
> The _no_ DCD file part is an adaptation for ac-sxb from zii-imx6q-rdu2.
> 
> Changes since v1:
> Changes according to Ahmad's review, thank you very much Ahmad!
> * Add barebox update handler in device initcall
> * Introduce compressed dtb
> * Remove explicit initialization of return value
> * Use imx7d-ddrc.dtsi instead of hardcoded memory node
> * Move imx7d-ac-sxb.dts to arch/arm/dts directory
> 
> Anees Rehman (2):
>   mci: imx-esdhc-pbl: Add support for IMX7
>   ARM: i.MX: Add atlascopco sxb board

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |