September 2019 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Sep 1 07:09:08 PDT 2019
Ending: Mon Sep 30 23:28:53 PDT 2019
Messages: 380

• [BUG] Cadence QSPI broken since barebox-2019.06.0?   Ian Abbott
• barebox 2019.07 ubiformat   Barbier, Renaud
• barebox 2019.07 ubiformat   Barbier, Renaud
• barebox 2019.07 ubiformat   Barbier, Renaud
• [PATCH] bootm: release tee_res   Rouven Czerwinski
• [PATCH] Doc: i.MX: Document image structure for i.MX   Rouven Czerwinski
• [PATCH] Doc: i.MX: Document image structure for i.MX   Rouven Czerwinski
• [PATCH] fixup! ARM: NETX: remove architecture   Rouven Czerwinski
• [PATCH v1 3/4] common: ubsan: ignore shifting one into sign bit   Rouven Czerwinski
• [PATCH v2] Doc: i.MX: Document image structure for i.MX   Rouven Czerwinski
• [PATCH v2 00/10] Add initial support for -fsanitize={ubsan,asan}   Ahmad Fatoum
• [PATCH 2/7] of: add support for devicetree overlays   Ahmad Fatoum
• initrd in imx8mm   Ahmad Fatoum
• [PATCH] gpio: add driver for SN74273 output expander   Ahmad Fatoum
• [RFC PATCH v1] edit: add vi alias with vi-style bindings   Ahmad Fatoum
• [PATCH v2] input: add handler for reset and power key input events   Ahmad Fatoum
• [PATCH v2] gpio: iopoll: implement gpio_poll_timeout_us   Ahmad Fatoum
• [PATCH] param: make dev_add_param_string_fixed value parameter const   Ahmad Fatoum
• [PATCH v2 0/4] stm32mp: add support for STPMIC1   Ahmad Fatoum
• [PATCH v2 1/4] i2c: port Linux i2c_parse_fw_timings   Ahmad Fatoum
• [PATCH v2 2/4] i2c: add stm32f7 I2C adapter driver   Ahmad Fatoum
• [PATCH v2 3/4] mfd: add support for STPMIC1   Ahmad Fatoum
• [PATCH v2 4/4] watchdog: add support for STPMIC1 integrated watchdog   Ahmad Fatoum
• [PATCH] edit: replace ASCII codes by symbolic names   Ahmad Fatoum
• [PATCH v2 0/3] sandbox: add HWRNG driver for host /dev/random   Ahmad Fatoum
• [PATCH v2 1/3] sandbox: hostfile: allow probing from device tree   Ahmad Fatoum
• [PATCH v2 2/3] sandbox: dts: add example for barebox, hostfile backed state   Ahmad Fatoum
• [PATCH v2 3/3] hwrng: add sandbox driver interface to host /dev/random   Ahmad Fatoum
• [PATCH] fixup! common: add generic CONFIG_UBSAN plumbing   Ahmad Fatoum
• [PATCH 01/11] linux/kbuild.h: sync with upstream   Ahmad Fatoum
• [PATCH] fixup! i2c: port Linux i2c_parse_fw_timings   Ahmad Fatoum
• [PATCH v3 5/6] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Ahmad Fatoum
• [PATCH v2 6/7] blspec: load firmware if specified in dt overlay   Ahmad Fatoum
• [PATCH v2 7/7] commands: add of_overlay command for device tree overlays   Ahmad Fatoum
• [PATCH v2 7/7] commands: add of_overlay command for device tree overlays   Ahmad Fatoum
• [PATCH v2 7/7] commands: add of_overlay command for device tree overlays   Ahmad Fatoum
• [PATCH v2 0/2] ARM: imx6: add new MarsBoard support   Ahmad Fatoum
• [PATCH v2 1/2] ARM: imx6: add Embest MarSBoard support   Ahmad Fatoum
• [PATCH v2 2/2] ARM: imx_v7_defconfig: enable Embdest MarS board   Ahmad Fatoum
• [PATCH 1/7] libfile: introduce copy_file_2 for copying starting with offset   Ahmad Fatoum
• [PATCH 2/7] ARM: Layerscape: add bootm handler for images   Ahmad Fatoum
• [PATCH 3/7] ARM: Layerscape: don't generate second-stage 2nd.image   Ahmad Fatoum
• [PATCH 4/7] filetype: support fastboot barebox_update with layerscape image   Ahmad Fatoum
• [PATCH 5/7] scripts: pblimage: explicitly set architecture to ARM   Ahmad Fatoum
• [PATCH 6/7] ARM: layerscape: tqmls1046a: disable all SGMII PHYs   Ahmad Fatoum
• [PATCH 7/7] Documentation: boards: document layerscape support   Ahmad Fatoum
• [PATCH 1/7] libfile: introduce copy_file_2 for copying starting with offset   Ahmad Fatoum
• [PATCH] squash! ARM: imx6: add Embest MarSBoard support   Ahmad Fatoum
• [PATCH v2 1/2] ARM: imx6: add Embest MarSBoard support   Ahmad Fatoum
• [PATCH] libfile: null-terminate buffer as expected   Ahmad Fatoum
• [PATCH] libfile: null-terminate buffer as expected   Ahmad Fatoum
• [PATCH] gpio: add driver for SN74273 output expander   Ahmad Fatoum
• [PATCH v2 0/6] ARM: layerscape: streamline and document boot   Ahmad Fatoum
• [PATCH v2 1/6] ARM: Layerscape: add bootm handler for images   Ahmad Fatoum
• [PATCH v2 2/6] ARM: Layerscape: don't generate second-stage 2nd.image   Ahmad Fatoum
• [PATCH v2 3/6] filetype: support fastboot barebox_update with layerscape image   Ahmad Fatoum
• [PATCH v2 4/6] scripts: pblimage: explicitly set architecture to ARM   Ahmad Fatoum
• [PATCH v2 5/6] ARM: layerscape: tqmls1046a: disable all SGMII PHYs   Ahmad Fatoum
• [PATCH v2 6/6] Documentation: boards: document layerscape support   Ahmad Fatoum
• [PATCH v1 1/4] console: disallow opening for writing when no write method defined   Ahmad Fatoum
• [PATCH v1 2/4] input: set console input name as input   Ahmad Fatoum
• [PATCH v1 3/4] common: ubsan: ignore shifting one into sign bit   Ahmad Fatoum
• [PATCH v1 4/4] USB: gadget: ACM: don't announce V.25ter support   Ahmad Fatoum
• [PATCH v1 4/4] USB: gadget: ACM: don't announce V.25ter support   Ahmad Fatoum
• [PATCH] regmap: align documentation in comment with code   Ahmad Fatoum
• [PATCH v1 3/4] common: ubsan: ignore shifting one into sign bit   Ahmad Fatoum
• [PATCH v1 4/4] USB: gadget: ACM: don't announce V.25ter support   Ahmad Fatoum
• [PATCH 0/6] scripts/dtc: rework dtc import handling   Ahmad Fatoum
• [PATCH 1/6] scripts/dtc: Reinstate barebox-specifics in update-dtc-source.sh   Ahmad Fatoum
• [PATCH 2/6] scripts/dtc: reinstate building of fdtget along with dtc   Ahmad Fatoum
• [PATCH 3/6] scripts/dtc: git rm old files as part of update process   Ahmad Fatoum
• [PATCH 4/6] scripts/dtc: mention dtc project in update-dtc-source.sh commit message   Ahmad Fatoum
• [PATCH 5/6] scripts/dtc: Update to upstream version v1.5.1   Ahmad Fatoum
• [PATCH 6/6] Documentation: document barebox device tree handling   Ahmad Fatoum
• [PATCH 2/8] scripts/dtc: Update to upstream version v1.5.0   Ahmad Fatoum
• [RFC PATCH] ARM: layerscape: zero-index DEBUG_LAYERSCAPE_UART_PORT   Ahmad Fatoum
• [PATCH] blspec: skip entries that are not blspec entries   Ahmad Fatoum
• [PATCH 1/2] ARM: at91: provide at91_mux_pio3_pin for use in first stage   Ahmad Fatoum
• [PATCH 2/2] pinctrl: add gpio and pinctrl driver for sama5d2 PIO4   Ahmad Fatoum
• [PATCH] kbuild, LLVMLinux: Add -Werror to cc-option to support clang   Ahmad Fatoum
• [PATCH] commands: ubsan: remove redundant depends   Ahmad Fatoum
• [PATCH] input: specialkeys: remove unused printk argument   Ahmad Fatoum
• [PATCH] gpio: da9062: fix uninitialized variable read   Ahmad Fatoum
• [PATCH 0/2] dtc: fix breakage of in-barebox libfdt   Ahmad Fatoum
• [PATCH 1/2] lib: fdt: define INT32_MAX for in-barebox use   Ahmad Fatoum
• [PATCH 2/2] fixup! Documentation: document barebox device tree handling   Ahmad Fatoum
• [PATCH] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators   Marco Felsch
• [PATCH 1/2] ARM: dts: imx6: phycore: make use of upstream dts   Marco Felsch
• [PATCH 2/2] ARM: dts: imx6: phycore: use spdx license identifier   Marco Felsch
• [PATCH 1/2] mfd: da9063: add support to populate subdevs   Marco Felsch
• [PATCH 2/2] gpio: add DA9062 MFD gpio support   Marco Felsch
• [PATCH] mci: core: make mci_register -EPROBE_DEFER sensitive   Marco Felsch
• [PATCH] mci: imx-esdhc: fix error handling during probe   Marco Felsch
• [PATCH] ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators   Marco Felsch
• [PATCH 1/2] ARM: dts: imx6: phycore: make use of upstream dts   Marco Felsch
• [PATCH 1/2] ARM: dts: imx6: phycore: make use of upstream dts   Marco Felsch
• No subject   Primoz Fiser
• [PATCH] mtd: spi-nor: Add support for s25fl128s0 s25fl128s1 flashes from Linux   Sascha Hauer
• [PATCH] gpio: iopoll: implement gpio_poll_timeout_us   Sascha Hauer
• [PATCH] Documentation: zii-imx7d-dev: Fix errors with openocd configuration script   Sascha Hauer
• [PATCH] Documentation: efi: fix typos   Sascha Hauer
• [PATCH] input: add handler for reset and power key input events   Sascha Hauer
• [PATCH 0/2] Fix buffer overflows in nfs code   Sascha Hauer
• [PATCH 1/2] net: nfs: Fix possible buffer overflow   Sascha Hauer
• [PATCH 2/2] fs: nfs: Fix possible buffer overflow   Sascha Hauer
• barebox bug, sh [ -c /dev/nand0.var.ubi.blablablub ] returns |true| even if there is no "blablablub" partition on "var" volume   Sascha Hauer
• [PATCH v2 00/10] Add initial support for -fsanitize={ubsan,asan}   Sascha Hauer
• [PATCH v2 00/10] Add initial support for -fsanitize={ubsan,asan}   Sascha Hauer
• [PATCH] video/stm: fix return value handling for of_get_display_timings()   Sascha Hauer
• [PATCH] libfile: fix typos   Sascha Hauer
• [PATCH] clk: zynqmp: rename driver specific CLK_MUX_READ_ONLY   Sascha Hauer
• [PATCH v4 1/2] elf: add 64 bits elf loading support   Sascha Hauer
• [PATCH 2/7] of: add support for devicetree overlays   Sascha Hauer
• [PATCH 3/7] blspec: add support for devicetree overlays   Sascha Hauer
• [PATCH] eeprom: at24: Select NVMEM as a dependency   Sascha Hauer
• [PATCH] gpio: add driver for SN74273 output expander   Sascha Hauer
• [PATCH] ARM: Cleanup stack offset cargo cult   Sascha Hauer
• [PATCH] ARM: aarch64: Re-implement most of barebox_arm_entry() in assembly   Sascha Hauer
• [PATCH 1/2] mfd: da9053: Drop unused 'priority' variable   Sascha Hauer
• [PATCH] mfd: rave-sp: Emulate firmware/bootloader mode reporting on RDU2   Sascha Hauer
• [PATCH] mtd: spi-nor: Import missing Micron devices   Sascha Hauer
• [PATCH] i2c/pca954x: Initialize the mux to disconnected state   Sascha Hauer
• [PATCH] Documentation: Provide default values for version/release   Sascha Hauer
• [PATCH 1/7] ARM: dts: vf610-zii-dev-rev-b: Fix SPI flash node name   Sascha Hauer
• [PATCH] console: set default console_device devname   Sascha Hauer
• [PATCH v2 0/7] Device Tree Overlay Support   Sascha Hauer
• [PATCH v2] gpio: iopoll: implement gpio_poll_timeout_us   Sascha Hauer
• [PATCH] param: make dev_add_param_string_fixed value parameter const   Sascha Hauer
• [PATCH v2] input: add handler for reset and power key input events   Sascha Hauer
• [PATCH 3/4] mtd: ubi: Compile fastmap.c with -Wno-address-of-packed-member   Sascha Hauer
• [PATCH] edit: replace ASCII codes by symbolic names   Sascha Hauer
• [PATCH] fixup! common: add generic CONFIG_UBSAN plumbing   Sascha Hauer
• [PATCH v2 0/3] sandbox: add HWRNG driver for host /dev/random   Sascha Hauer
• [PATCH v2 0/4] stm32mp: add support for STPMIC1   Sascha Hauer
• v2019.09.0   Sascha Hauer
• [PATCH v3 5/6] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK   Sascha Hauer
• [PATCH 1/3] Blackfin: Remove architecture   Sascha Hauer
• [PATCH 2/3] serial: Remove blackfin driver   Sascha Hauer
• [PATCH 3/3] USB: remove blackfin support   Sascha Hauer
• [PATCH 1/8] ARM: Remove vincell_defconfig   Sascha Hauer
• [PATCH 2/8] ARM: Remove datamodul-edm-qmx6_defconfig   Sascha Hauer
• [PATCH 3/8] ARM: Remove tqma53_defconfig   Sascha Hauer
• [PATCH 4/8] ARM: Remove tx53stk5_defconfig   Sascha Hauer
• [PATCH 5/8] ARM: NETX: remove architecture   Sascha Hauer
• [PATCH 6/8] serial: Remove NETX serial driver   Sascha Hauer
• [PATCH 7/8] net: Remove NETX ethernet driver   Sascha Hauer
• [PATCH 8/8] scripts: Remove NETX image tool   Sascha Hauer
• [PATCH] video: imxfb: make pcr and bpp per-display settings   Sascha Hauer
• [PATCH v4 2/2] mci: implement command to switch a mmc device to enhanced mode   Sascha Hauer
• [PATCH 1/2] ARM: dts: drop skeleton.dtsi   Sascha Hauer
• [PATCH 1/2] mfd: da9063: add support to populate subdevs   Sascha Hauer
• [PATCH] mci: core: make mci_register -EPROBE_DEFER sensitive   Sascha Hauer
• [PATCH] mci: imx-esdhc: fix error handling during probe   Sascha Hauer
• [PATCH 1/2] state: drop unused code and declarations for non-existing functions   Sascha Hauer
• [PATCH v4 2/2] mci: implement command to switch a mmc device to enhanced mode   Sascha Hauer
• [PATCH] gcc-9: silence 'address-of-packed-member' warning   Sascha Hauer
• [PATCH 3/4] mtd: ubi: Compile fastmap.c with -Wno-address-of-packed-member   Sascha Hauer
• [PATCH v2 0/7] Device Tree Overlay Support   Sascha Hauer
• [PATCH v2 0/2] ARM: imx6: add new MarsBoard support   Sascha Hauer
• [PATCH] bootm: release tee_res   Sascha Hauer
• [PATCH 1/3] of: Fix memory hole in of_find_node_by_reproducible_name()   Sascha Hauer
• [PATCH 2/3] of: add of_diff()   Sascha Hauer
• [PATCH 3/3] add of_diff command   Sascha Hauer
• [PATCH] clk: i.MX6qp: Fix location of the enfc_sel mux   Sascha Hauer
• [PATCH] mtd: nand: Fix retrieving nand_chip from mtd_info   Sascha Hauer
• [PATCH 1/7] libfile: introduce copy_file_2 for copying starting with offset   Sascha Hauer
• [PATCH v3 0/8] Device Tree Overlay Support   Sascha Hauer
• [PATCH 1/2] i.MX: Introduce imx_ocotp_read_uid()   Sascha Hauer
• [PATCH 0/6] ARM: Merge single PBL code into multi PBL code   Sascha Hauer
• [PATCH 1/6] ARM: remove PBL_FORCE_PIGGYDATA_COPY   Sascha Hauer
• [PATCH 2/6] ARM: Compile dtbs for lowlevel code   Sascha Hauer
• [PATCH 3/6] ARM: drop bultin DTB   Sascha Hauer
• [PATCH 4/6] ARM: Merge single pbl with multi pbl   Sascha Hauer
• [PATCH 5/6] ARM: remove now unused PBL code   Sascha Hauer
• [PATCH 6/6] ARM: aarch64: Re-implement most of barebox_arm_entry() in assembly   Sascha Hauer
• [PATCH 1/8] ARM: zii-imx8mq-dev: Drop extra relocation code   Sascha Hauer
• [PATCH] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset   Sascha Hauer
• [PATCH] libfile: null-terminate buffer as expected   Sascha Hauer
• [PATCH] squash! ARM: imx6: add Embest MarSBoard support   Sascha Hauer
• [PATCH] imd: fix memory leak   Sascha Hauer
• [PATCH 1/6] barebox-wrapper: add IRQ_WAKE_THREAD   Sascha Hauer
• [PATCH 1/2] gpio: add driver for MPC8xxx ip core   Sascha Hauer
• [PATCH] Doc: i.MX: Document image structure for i.MX   Sascha Hauer
• [PATCH 1/2] Convert latin1 files to utf-8   Sascha Hauer
• [PATCH 00/16] ARM: mxs: full multi image support   Sascha Hauer
• [PATCH 01/16] ARM: start: Allow to pass machine type as boarddata   Sascha Hauer
• [PATCH 02/16] ARM: tx28: Pass and check machine type   Sascha Hauer
• [PATCH 03/16] ARM: tx28: Make locally used function static   Sascha Hauer
• [PATCH 04/16] ARM: duckbill: Check machine type in initcalls   Sascha Hauer
• [PATCH 05/16] ARM: Freescale mx28evk: Check machine type in initcalls   Sascha Hauer
• [PATCH 06/16] ARM: i.MX23 olinuxino: Check machine type in initcalls   Sascha Hauer
• [PATCH 07/16] ARM: Crytalfonts cfa10036: Check machine type in initcalls   Sascha Hauer
• [PATCH 08/16] ARM: i.MX23 Chumby: Check machine type in initcalls   Sascha Hauer
• [PATCH 09/16] ARM: Freescale i.MX23 evk: Check machine type in initcalls   Sascha Hauer
• [PATCH 10/16] ARM: mxs: cfa10036: Switch to multi image support   Sascha Hauer
• [PATCH 11/16] ARM: mxs: imx23-evk: Switch to multi image support   Sascha Hauer
• [PATCH 12/16] ARM: mxs: chumby: Switch to multi image support   Sascha Hauer
• [PATCH 13/16] ARM: mxs: Move HAVE_PBL_MULTI_IMAGES up to ARCH   Sascha Hauer
• [PATCH 14/16] ARM: mxs: Allow to compile all boards for a SoC together   Sascha Hauer
• [PATCH 15/16] ARM: add common i.MX28 defconfig file   Sascha Hauer
• [PATCH 16/16] ARM: add common i.MX23 defconfig file   Sascha Hauer
• [PATCH v2 0/6] ARM: layerscape: streamline and document boot   Sascha Hauer
• [PATCH] trivial: fix typo lenght -> length   Sascha Hauer
• [PATCH] fixup! ARM: NETX: remove architecture   Sascha Hauer
• [PATCH] chdir(): add LOOKUP_DIRECTORY flag to filename_lookup()   Sascha Hauer
• [PATCH] blspec: skip entries that are not blspec entries   Sascha Hauer
• [PATCH] regmap: align documentation in comment with code   Sascha Hauer
• [PATCH v2] mtd: ubi: Max out wear-leveling threshold   Sascha Hauer
• [PATCH v1 1/4] console: disallow opening for writing when no write method defined   Sascha Hauer
• [PATCH] imx-bbu-nand-fcb: Mark block as bad when erasing it fails   Sascha Hauer
• [PATCH v2] Doc: i.MX: Document image structure for i.MX   Sascha Hauer
• [PATCH 0/6] scripts/dtc: rework dtc import handling   Sascha Hauer
• [PATCH] net: dsa: mv88e6xxx: Fix error message typo   Sascha Hauer
• [PATCH v3] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset   Sascha Hauer
• [PATCH v3] Documentation: add watchdog documentation   Sascha Hauer
• [PATCH] Allow usage of default environment without environment file storage   Sascha Hauer
• barebox 2019.07 ubiformat   Sascha Hauer
• [PATCH v3 0/3] remoteproc for barebox   Sascha Hauer
• barebox 2019.07 ubiformat   Sascha Hauer
• [RFC PATCH] ARM: layerscape: zero-index DEBUG_LAYERSCAPE_UART_PORT   Sascha Hauer
• [PATCH 1/2] ARM: at91: provide at91_mux_pio3_pin for use in first stage   Sascha Hauer
• [PATCH] kbuild, LLVMLinux: Add -Werror to cc-option to support clang   Sascha Hauer
• [PATCH] commands: ubsan: remove redundant depends   Sascha Hauer
• [PATCH] nvmem: Fix read/write access to partition devices   Sascha Hauer
• [PATCH v4 0/4] Machine ID Support   Sascha Hauer
• [PATCH 1/3] state: backend_bucket_circular: harmonize code with dt-utils   Sascha Hauer
• [PATCH] mtd: nand: nand_omap_gpmc: Fix mtd_info usage   Sascha Hauer
• [PATCH] mci: imx-esdhc-pbl: Fix watermark level value for i.MX   Sascha Hauer
• [RFC PATCH v1] edit: add vi alias with vi-style bindings   Roland Hieber
• [PATCH 5/7] scripts: pblimage: explicitly set architecture to ARM   Roland Hieber
• [PATCH 4/6] scripts/dtc: mention dtc project in update-dtc-source.sh commit message   Roland Hieber
• [PATCH] chdir(): add LOOKUP_DIRECTORY flag to filename_lookup()   Robert Karszniewicz
• [PATCH] video/stm: fix return value handling for of_get_display_timings()   Uwe Kleine-König
• [PATCH] video: imxfb: make pcr and bpp per-display settings   Uwe Kleine-König
• [PATCH v4 0/2] simplify setting enhanced area of mmc devices   Uwe Kleine-König
• [PATCH v4 1/2] mci: provide wrapper for mci_get_device_by_name ∘ devpath_to_name   Uwe Kleine-König
• [PATCH v4 2/2] mci: implement command to switch a mmc device to enhanced mode   Uwe Kleine-König
• [PATCH 1/2] ARM: dts: drop skeleton.dtsi   Uwe Kleine-König
• [PATCH 2/2] ARM: dts: imx25-karo-tx25: include Linux dts instead of duplicating it   Uwe Kleine-König
• [PATCH 1/2] state: drop unused code and declarations for non-existing functions   Uwe Kleine-König
• [PATCH 2/2] state: provide dummy implementations for some functions when STATE is disabled   Uwe Kleine-König
• [PATCH v4 2/2] mci: implement command to switch a mmc device to enhanced mode   Uwe Kleine-König
• [PATCH 1/7] libfile: introduce copy_file_2 for copying starting with offset   Uwe Kleine-König
• [PATCH] docs: add python version in shebang   Uwe Kleine-König
• [PATCH 1/2] Convert latin1 files to utf-8   Uwe Kleine-König
• [PATCH 2/2] Documentation: make gen_commands helper python3 compatible   Uwe Kleine-König
• [PATCH 2/2] Documentation: make gen_commands helper python3 compatible   Uwe Kleine-König
• [PATCH] trivial: fix typo lenght -> length   Uwe Kleine-König
• [PATCH v3 0/4] Machine ID Support   Bastian Krause
• [PATCH v3 1/4] digest.h: needs errno definitions   Bastian Krause
• [PATCH v3 2/4] common: machine_id: introduce machine id generation   Bastian Krause
• [PATCH v3 3/4] nvmem: ocotp: set unique id as machine-id hashable   Bastian Krause
• [PATCH v3 4/4] bootm: allow providing machine id to Kernel   Bastian Krause
• [PATCH v3 3/4] nvmem: ocotp: set unique id as machine-id hashable   Bastian Krause
• [PATCH v4 0/4] Machine ID Support   Bastian Krause
• [PATCH v4 1/4] digest.h: needs errno definitions   Bastian Krause
• [PATCH v4 2/4] common: machine_id: introduce machine id generation   Bastian Krause
• [PATCH v4 3/4] nvmem: ocotp: set unique id as machine-id hashable   Bastian Krause
• [PATCH v4 4/4] bootm: allow providing machine id to Kernel   Bastian Krause
• [PATCH v3] elf: add 64 bits elf loading support   Clement Leger
• [PATCH v4 1/2] elf: add 64 bits elf loading support   Clement Leger
• [PATCH v4 2/2] mips: bootm: Cast elf entry into unsigned long   Clement Leger
• [PATCH v3] elf: add 64 bits elf loading support   Clément Leger
• [PATCH] docs: add python version in shebang   Stefan Lengfeld
• [PATCH v2 1/2] ARM: imx6: add Embest MarSBoard support   Stefan Lengfeld
• [PATCH] docs: add python version in shebang   Stefan Lengfeld
• barebox bug, sh [ -c /dev/nand0.var.ubi.blablablub ] returns |true| even if there is no "blablablub" partition on "var" volume   Mainz, Roland
• barebox bug, sh [ -c /dev/nand0.var.ubi.blablablub ] returns |true| even if there is no "blablablub" partition on "var" volume   Mainz, Roland
• [PATCH 5/5] eeprom: at24: Convert the driver to NVMEM   Antony Pavlov
• [PATCH] version_string: Add toolchain and build host info   Antony Pavlov
• [PATCH] mtd: nand: nand_omap_gpmc: Fix mtd_info usage   Teresa Remmet
• [PATCH v3] elf: add 64 bits elf loading support   Oleksij Rempel
• [PATCH] CONFIG_PBL_BREAK option is available for MIPS   Oleksij Rempel
• [PATCH v3 0/3] remoteproc for barebox   Oleksij Rempel
• [PATCH v3 1/3] elf: add missing elf32_shdr   Oleksij Rempel
• [PATCH v3 2/3] of: base: don't try to read cells_name property if no cells_name set   Oleksij Rempel
• [PATCH v3 3/3] port reduced version of remoteproc framework from linux   Oleksij Rempel
• [PATCH v3] Documentation: add watchdog documentation   Oleksij Rempel
• [PATCH v4] Documentation: add watchdog documentation   Oleksij Rempel
• [PATCH v2] mtd: ubi: Max out wear-leveling threshold   Stefan Riedmueller
• [PATCH] nvmem: Fix read/write access to partition devices   Stefan Riedmueller
• [PATCH 1/2] ARM: dts: imx6: phycore: make use of upstream dts   Stefan Riedmüller
• [PATCH 1/2] ARM: dts: imx6: phycore: make use of upstream dts   Stefan Riedmüller
• [PATCH] Allow usage of default environment without environment file storage   Albert Schwarzkopf
• barebox bug, sh [ -c /dev/nand0.var.ubi.blablablub ] returns |true| even if there is no "blablablub" partition on "var" volume   Robert Schwebel
• [PATCH 5/5] eeprom: at24: Convert the driver to NVMEM   Andrey Smirnov
• [PATCH] eeprom: at24: Select NVMEM as a dependency   Andrey Smirnov
• [PATCH 1/4] ratp: Mark struct ratp_bb as packed   Andrey Smirnov
• [PATCH 2/4] net: Adjust net_copy_uint32's signature   Andrey Smirnov
• [PATCH 3/4] mtd: ubi: Compile fastmap.c with -Wno-address-of-packed-member   Andrey Smirnov
• [PATCH 4/4] USB: gadget: Compile composite.c with -Wno-address-of-packed-member   Andrey Smirnov
• [PATCH] ARM: aarch64: Re-implement most of barebox_arm_entry() in assembly   Andrey Smirnov
• [PATCH 1/2] mfd: da9053: Drop unused 'priority' variable   Andrey Smirnov
• [PATCH 2/2] mfd: da9063: Drop unused 'priority' variable   Andrey Smirnov
• [PATCH] mfd: rave-sp: Emulate firmware/bootloader mode reporting on RDU2   Andrey Smirnov
• [PATCH] mtd: spi-nor: Import missing Micron devices   Andrey Smirnov
• [PATCH] i2c/pca954x: Initialize the mux to disconnected state   Andrey Smirnov
• [PATCH] Documentation: Provide default values for version/release   Andrey Smirnov
• [PATCH 1/7] ARM: dts: vf610-zii-dev-rev-b: Fix SPI flash node name   Andrey Smirnov
• [PATCH 2/7] ARM: dts: vf610-zii-dev-rev-c: Fix DSPI flash node name   Andrey Smirnov
• [PATCH 3/7] ARM: dts: vf610-zii-cfu1: Configure "STATUS" LED as heartbeat   Andrey Smirnov
• [PATCH 4/7] ARM: dts: vf610-zii-cfu1: Expose fiber optic module EEPROM   Andrey Smirnov
• [PATCH 5/7] ARM: dts: vf610-zii-scu4-aib: Expose fiber EEPROM modules   Andrey Smirnov
• [PATCH 6/7] ARM: dts: imx8mq-zii-ultra: Add switch EEPROM alias   Andrey Smirnov
• [PATCH 7/7] ARM: zii-vf610-dev: Re-align SCU4's hostname with upstream kernel   Andrey Smirnov
• [PATCH 3/4] mtd: ubi: Compile fastmap.c with -Wno-address-of-packed-member   Andrey Smirnov
• [PATCH] ARM: aarch64: Re-implement most of barebox_arm_entry() in assembly   Andrey Smirnov
• [PATCH 1/2] i.MX: Introduce imx_ocotp_read_uid()   Andrey Smirnov
• [PATCH 2/2] ARM: i.MX8MQ: Display UID information on boot   Andrey Smirnov
• [PATCH v2] ARM: aarch64: Re-implement most of barebox_arm_entry() in assembly   Andrey Smirnov
• [PATCH 1/8] ARM: zii-imx8mq-dev: Drop extra relocation code   Andrey Smirnov
• [PATCH 2/8] ARM: zii-imx8mq-dev: Switch to using compressed DTB   Andrey Smirnov
• [PATCH 3/8] ARM: zii-vf610-dev: Swith to using compressed DTB   Andrey Smirnov
• [PATCH 4/8] ARM: zii-imx6-rdu2: Swith to using compressed DTB   Andrey Smirnov
• [PATCH 5/8] ARM: zii-imx7d-dev: Swith to using compressed DTB   Andrey Smirnov
• [PATCH 6/8] ARM: zii-imx51-rdu1: Swith to using compressed DTB   Andrey Smirnov
• [PATCH 7/8] ARM: imx8mq-zii-ultra: Use upstream DTS   Andrey Smirnov
• [PATCH 8/8] ARM: zii-common: Share MAC address configuration between RDU2/3   Andrey Smirnov
• [PATCH] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset   Andrey Smirnov
• [PATCH] fixup! net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset   Andrey Smirnov
• [PATCH] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset   Andrey Smirnov
• [PATCH v2] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset   Andrey Smirnov
• [PATCH] net: dsa: mv88e6xxx: Fix error message typo   Andrey Smirnov
• [PATCH v3 3/4] nvmem: ocotp: set unique id as machine-id hashable   Andrey Smirnov
• [PATCH v2] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset   Andrey Smirnov
• [PATCH v3] net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset   Andrey Smirnov
• [PATCH] mci: imx-esdhc-pbl: Fix watermark level value for i.MX   Andrey Smirnov
• [PATCH] mci: imx-esdhc-pbl: Fix watermark level value for i.MX   Andrey Smirnov
• [PATCH v2] mci: imx-esdhc-pbl: Fix watermark level value for i.MX   Andrey Smirnov
• [PATCH] ARM: start: Cast board data to "unsigned long"   Andrey Smirnov
• [PATCH] version_string: Add toolchain and build host info   Andrey Smirnov
• [PATCH] Doc: i.MX: Document image structure for i.MX   Lucas Stach
• [PATCH] libfile: fix typos   Michael Tretter
• [PATCH] clk: zynqmp: rename driver specific CLK_MUX_READ_ONLY   Michael Tretter
• [PATCH 0/7] Device Tree Overlay Support   Michael Tretter
• [PATCH 1/7] dtc: add -@ option to enable __symbols__   Michael Tretter
• [PATCH 2/7] of: add support for devicetree overlays   Michael Tretter
• [PATCH 3/7] blspec: add support for devicetree overlays   Michael Tretter
• [PATCH 4/7] of: add iterator for overlays   Michael Tretter
• [PATCH 5/7] firmware: add support to load firmware from dt overlay   Michael Tretter
• [PATCH 6/7] blspec: load firmware if specified in dt overlay   Michael Tretter
• [PATCH 7/7] commands: add of_overlay command for device tree overlays   Michael Tretter
• [PATCH 2/7] of: add support for devicetree overlays   Michael Tretter
• [PATCH v2 0/7] Device Tree Overlay Support   Michael Tretter
• [PATCH v2 1/7] dtc: add -@ option to enable __symbols__   Michael Tretter
• [PATCH v2 2/7] of: add support for devicetree overlays   Michael Tretter
• [PATCH v2 3/7] blspec: add support for devicetree overlays   Michael Tretter
• [PATCH v2 4/7] of: add iterator for overlays   Michael Tretter
• [PATCH v2 5/7] firmware: add support to load firmware from dt overlay   Michael Tretter
• [PATCH v2 6/7] blspec: load firmware if specified in dt overlay   Michael Tretter
• [PATCH v2 7/7] commands: add of_overlay command for device tree overlays   Michael Tretter
• [PATCH v2 7/7] commands: add of_overlay command for device tree overlays   Michael Tretter
• [PATCH v3 0/8] Device Tree Overlay Support   Michael Tretter
• [PATCH v3 1/8] of: add support for devicetree overlays   Michael Tretter
• [PATCH v3 2/8] blspec: add support for devicetree overlays   Michael Tretter
• [PATCH v3 3/8] of: add iterator for overlays   Michael Tretter
• [PATCH v3 4/8] firmware: add function to find firmware by devicetree node   Michael Tretter
• [PATCH v3 5/8] firmware: add support to load firmware from dt overlay   Michael Tretter
• [PATCH v3 6/8] blspec: load firmware if specified in dt overlay   Michael Tretter
• [PATCH v3 7/8] commands: add of_overlay command for device tree overlays   Michael Tretter
• [PATCH v3 8/8] dtc: optionally add add __symbols__ to build-in devicetree   Michael Tretter
• [PATCH] blspec: skip entries that are not blspec entries   Michael Tretter
• [PATCH] blspec: skip entries that are not blspec entries   Michael Tretter
• [PATCH v2] blspec: skip entries that are not blspec entries   Michael Tretter
• [PATCH 1/6] barebox-wrapper: add IRQ_WAKE_THREAD   Steffen Trumtrar
• [PATCH 2/6] usb: gadget: add usb_gadget_udc_reset function   Steffen Trumtrar
• [PATCH 3/6] usb/ch9.h: add USB 3.1 isoc endpoint define   Steffen Trumtrar
• [PATCH 4/6] usb: dwc3: add support for gadget mode   Steffen Trumtrar
• [PATCH 5/6] usb: gadget: composite: conditionally dequeue setup requests   Steffen Trumtrar
• [PATCH 6/6] ARM: Layerscape: LS1046a: configure USB ports   Steffen Trumtrar
• [PATCH 1/2] gpio: add driver for MPC8xxx ip core   Steffen Trumtrar
• [PATCH 2/2] ARM: Layerscape: ls1046a: enable GPIOs   Steffen Trumtrar
• initrd in imx8mm   Yazdani, Reyhaneh
• initrd in imx8mm   Yazdani, Reyhaneh
• [PATCH] console: set default console_device devname   dgienda125 at gmail.com
• [PATCH] CONFIG_PBL_BREAK option is available for MIPS   iu87m888m at qq.com
• [PATCH] imd: fix memory leak   Ulrich Ölmann
• [PATCH 1/3] state: backend_bucket_circular: harmonize code with dt-utils   Ulrich Ölmann
• [PATCH 2/3] state: backend_bucket_circular: fix double free()   Ulrich Ölmann
• [PATCH 3/3] common: state: fix backward compatibility   Ulrich Ölmann

Last message date: Mon Sep 30 23:28:53 PDT 2019
Archived on: Mon Sep 30 23:29:17 PDT 2019

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...