[PATCH] ARM: zii-rdu2: disable eth0 and eth1

Vivien Didelot vivien.didelot at gmail.com
Tue Jun 11 07:46:03 PDT 2019


Hi Lucas,

On Tue, 11 Jun 2019 13:45:13 +0200, Lucas Stach <l.stach at pengutronix.de> wrote:
> Am Montag, den 10.06.2019, 11:58 -0400 schrieb Vivien Didelot:
> > The current support for the ZII RDU2 Board times out on eth0 and eth1
> > when booting 'net' from an alternative interface, like a USB Ethernet
> > dongle. eth0 is the DSA master interface and has no use within barebox,
> > as well as the gigabit interface eth1 which is wired to the switch
> > port 0. Disable them to allow Barebox to boot right away from network.
> 
> NACK.
> 
> With the just merged patches to the RDU2 environment the FEC interface
> is fully usable for regular network boot, which is what I use for my
> development setups.

Do you mean we can now use one of netleft, netaux or netright to tftpboot?

> As USB network boot requires additional hardware, I would say it's fair
> to require to change the environment on the boards used for DSA
> development.

I'd certainly agree with that if booting from a DSA slave is now possible.


Thanks,
Vivien



More information about the barebox mailing list