[PATCH] ARM: imx6sx-sdb: remove PHY reset GPIO from DT

Lucas Stach l.stach at pengutronix.de
Fri Jun 7 01:50:13 PDT 2019


From: Lucas Stach <dev at lynxeye.de>

The board file already has a more sophisticated PHY reset sequence,
so there is no need to do it in the driver.

Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
 arch/arm/dts/imx6sx-sdb.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/imx6sx-sdb.dts b/arch/arm/dts/imx6sx-sdb.dts
index 18d873ccf21e..8cf412a39f75 100644
--- a/arch/arm/dts/imx6sx-sdb.dts
+++ b/arch/arm/dts/imx6sx-sdb.dts
@@ -19,6 +19,10 @@
 	};
 };
 
+&fec1 {
+	/delete-property/ phy-reset-gpios;
+};
+
 &ocotp {
 	barebox,provide-mac-address = <&fec1 0x620 &fec2 0x632>;
 };
-- 
2.21.0




More information about the barebox mailing list