[PATCH 7/7] ARM: stm32mp: add entry point, not point.pblb to pblb-y

Ahmad Fatoum a.fatoum at pengutronix.de
Mon Jun 3 12:05:59 PDT 2019


Other images/Makefile.${arch}s, e.g. images/Makefile.imx, populate
pblp-* with the entry points to build, not the pbl file that's
generated. Adjust the images/Makefile.stm32mp  to do the same.

Cc: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
 images/Makefile.stm32mp | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/images/Makefile.stm32mp b/images/Makefile.stm32mp
index d26231cd92d1..c49b1d72b788 100644
--- a/images/Makefile.stm32mp
+++ b/images/Makefile.stm32mp
@@ -3,6 +3,6 @@
 # barebox image generation Makefile for STMicroelectronics MP1
 #
 
-pblb-$(CONFIG_MACH_STM32MP157C_DK2) += start_stm32mp157c_dk2.pblb
+pblb-$(CONFIG_MACH_STM32MP157C_DK2) += start_stm32mp157c_dk2
 FILE_barebox-stm32mp157c-dk2.img = start_stm32mp157c_dk2.pblb
 image-$(CONFIG_MACH_STM32MP157C_DK2) += barebox-stm32mp157c-dk2.img
-- 
2.20.1




More information about the barebox mailing list