[PATCH v2 0/8] i.MX8MQ EVK miscellanea

Andrey Smirnov andrew.smirnov at gmail.com
Wed Sep 19 08:45:33 PDT 2018


Everyone:

This is a number of i.MX8MQ or EVK related changes that are sitting in
my repo that I am hoping to upstream:

    - Pactches 1, 3, 4 are clock related fixes needed to get FEC,
      USDHC1 and USDHC2 to work.

    - Patch 2 was made while working custom i.MX8MQ board (not
      upstreamed yet) that made use of that controller

    - Patch 5 should be self-explanatory bug fix

    - Patch 6 is PHY configuration code need to use FEC on EVK

    - Patch 7 and 8 are both conveninece code to avoid having to
      specify memory size explicitly as well as a second part of a fix
      for a problem discussed in [1]

Changes since [v1]:

    - Removed redundant DT code in patch 6

[1] http://lists.infradead.org/pipermail/barebox/2018-August/034402.html
[v1] http://lists.infradead.org/pipermail/barebox/2018-September/034742.html

Andrey Smirnov (8):
  clk: i.MX8MQ: Bump refcounters of various important clocks
  ARM: i.MX8MQ: Add missing node for ECSPI1
  ARM: i.MX8MQ: Configure USDHC1,2 clocks
  ARM: i.MX8MQ: Configure FEC1 clocks
  ARM: nxp-imx8mq-evk: Add missing compatibility check
  ARM: nxp-imx8mq-evk: Add FEC's PHY configuration code
  ARM: i.MX: esdctl: Add memory size detection for i.MX8MQ
  ARM: nxp-imx8mq-evk: Make use of memory size detection code

 arch/arm/boards/nxp-imx8mq-evk/board.c    | 27 ++++++-
 arch/arm/boards/nxp-imx8mq-evk/lowlevel.c |  4 +-
 arch/arm/dts/imx8mq-ddrc.dtsi             | 17 ++++
 arch/arm/dts/imx8mq-evk.dts               |  7 +-
 arch/arm/dts/imx8mq.dtsi                  | 42 ++++++++++
 arch/arm/mach-imx/esdctl.c                | 98 +++++++++++++++++++++++
 arch/arm/mach-imx/include/mach/esdctl.h   |  1 +
 drivers/clk/imx/clk-imx8mq.c              | 12 +++
 8 files changed, 200 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm/dts/imx8mq-ddrc.dtsi

-- 
2.17.1




More information about the barebox mailing list