[PATCH 0/4] make imx-usb-loader usable for unknown device IDs

Sascha Hauer s.hauer at pengutronix.de
Tue Sep 4 01:21:25 PDT 2018


On Mon, Sep 03, 2018 at 09:32:51PM +0200, Roland Hieber wrote:
> Some newer i.MX processors allow changing the USB Vendor/Product ID by
> blowing fuses. This short series allws imx-usb-loader to deal with such
> hardware that is indeed an i.MX device and supports the USB bootloader
> protocol, but doesn't identify as an i.MX device via its USB ID. 
> 
> Patches 1 and 2 do some small preparation, Patch 3 is the real work, and
> Patch 4 polishes it nicely.
> 
> Roland Hieber (4):
>   scripts: imx-usb-loader: rename imx_device() to imx_device_by_usb_id()
>   scripts: imx-usb-loader: fail early if the USB device path does not
>     match
>   scripts: imx-usb-loader: allow use of unknown USB IDs
>   scripts: imx-usb-loader: make i.MX6SoloX better to type
> 
>  scripts/imx/imx-usb-loader.c | 76 +++++++++++++++++++++++++++++-------
>  1 file changed, 62 insertions(+), 14 deletions(-)

Applied, thanks

Sascha

> 
> -- 
> 2.18.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list