[PATCH v6 00/10] ARM: i.MX8MQ and EVK support

Andrey Smirnov andrew.smirnov at gmail.com
Wed Jun 13 23:27:41 PDT 2018


Everyone:

Picking up where Sascha left off, this is the next version of the
patchset that adds support for i.MX8MQ EVK board.

This patchest is also availible at:

  https://github.com/ndreys/barebox/tree/imx8m-support-v6

Changes since [v6]:

  - Patchset rebased on latest master, so it is now down to 10 patches

  - <linux/iopoll.h> support in PBL is now done by stubbing out
    get_time_ns() and is_timeout() in clock.h

  - Additional speeling fixes

Changes since [v4]:

  - Fix a critical OCOTP bug (missing .format_mac in "ARM: i.MX:
    ocotp: Add i.MX8MQ support") introduced in v3 and was exposed by
    defconfig change in v4

  - Minor spelling/gramatical fixes in various commits and commit
    messages

Changes since [v3]:

  - Timeout/delay functions were moved into lib/ instead of being
    inline in order to avoid image size increase.

  - Imx-image chages were reworked to fix regression identified by
    Alexander Kurz in [regression1]

  - Minor fix to "clock: Use udelay() to implement mdelay()" (33/54)
    to prevent 32-bit ARM EABI toolchain from issuing a call to
    unsigned long division helper

  - Imx_v8_defconfig was modified to be as close to imx_v7_defconfig
    as possible.

        Removed options:
		CONFIG_PBL_CONSOLE=y
		CONFIG_CONSOLE_RATP=y

    	Added options:
		CONFIG_CONSOLE_ACTIVATE_NONE=y
		CONFIG_CMD_DHCP=y
		CONFIG_CMD_MIITOOL=y
		CONFIG_CMD_PING=y
		CONFIG_CMD_I2C=y
		CONFIG_NET=y
		CONFIG_NET_NETCONSOLE=y
		CONFIG_NET_RESOLV=y
		CONFIG_DRIVER_NET_FEC_IMX=y
		CONFIG_I2C=y
		CONFIG_I2C_IMX=y
		CONFIG_FS_TFTP=y
		CONFIG_FS_NFS=y

Changes since [v2]:

  - i.MX8 specific eSDHC bootstrap code code fixed to function
    correctly with high capacity SD cards

  - DDR PHY firmware converted to use Sascha's firmware framework and
    be SoC specific (can be shared among different boards)

  - DDR register definitions moved to imx8-ddrc.h as well as cleaned
    up to contain only constants that are being used

  - Incorporated imx-image i.MX8 work done by Sascha as well as extend
    it to create valid AArch64 header

  - Patchset is rebase on latest 'next' branch to accomodate recent
    OCOTP changes

Changes since [v1]:

  - The patchset now allows building 1st stage bootloader that can be
    progammed on SD card and booted standalone

Currently out of scope of this patch (not tested or documented, will
be coming in a follow up series):

  - Integration of ARM Trusted Firmware

  - Booting Linux kernel

Current assumptions (all subject to change, but listed below to be
explicit):

  - DDR initialization code is auto-generated by i.MX8M DDR Tool and
    used as close to as-is as possible.

Feedback is wellcome!

Thanks,
Andrey Smirnov

[v1] http://lists.infradead.org/pipermail/barebox/2018-March/032386.html
[v2] http://lists.infradead.org/pipermail/barebox/2018-May/033149.html
[v3] http://lists.infradead.org/pipermail/barebox/2018-June/033390.html
[regression1] http://lists.infradead.org/pipermail/barebox/2018-June/033475.html
[v4] http://lists.infradead.org/pipermail/barebox/2018-June/033504.html
[v5] http://lists.infradead.org/pipermail/barebox/2018-June/033592.html

Andrey Smirnov (7):
  Port <linux/iopoll.h> from U-Boot
  clock: Use udelay() to implement mdelay()
  ARM: i.MX8: Add DDRC PHY support code
  ARM: Specify HAVE_PBL_IMAGE for CPU_64
  scripts: imx-image: Use a loop to create multiple header copies
  scripts: imx-image: Share the code to write barebox header
  ARM: Introduce imx_v8_defconfig

Sascha Hauer (3):
  ARM: i.MX: ocotp: Provide missing .format_mac for i.MX8MQ
  scripts: imx-image: Add i.MX8MQ support
  ARM: i.MX8: Add i.MX8mq EVK support

 Documentation/boards/imx.rst                  |   13 +-
 Documentation/boards/imx/nxp-imx8mq-evk.rst   |  116 ++
 arch/arm/boards/Makefile                      |    1 +
 arch/arm/boards/nxp-imx8mq-evk/.gitignore     |    1 +
 arch/arm/boards/nxp-imx8mq-evk/Makefile       |    4 +
 arch/arm/boards/nxp-imx8mq-evk/board.c        |   44 +
 arch/arm/boards/nxp-imx8mq-evk/ddr.h          |   28 +
 arch/arm/boards/nxp-imx8mq-evk/ddr_init.c     |  223 ++++
 arch/arm/boards/nxp-imx8mq-evk/ddrphy_train.c | 1026 +++++++++++++++++
 .../flash-header-imx8mq-evk.imxcfg            |    4 +
 arch/arm/boards/nxp-imx8mq-evk/lowlevel.c     |   81 ++
 arch/arm/configs/imx_v8_defconfig             |  107 ++
 arch/arm/cpu/Kconfig                          |    1 +
 arch/arm/dts/Makefile                         |    1 +
 arch/arm/dts/imx8mq-evk.dts                   |  444 +++++++
 arch/arm/mach-imx/Kconfig                     |    5 +
 arch/arm/mach-imx/Makefile                    |    1 +
 arch/arm/mach-imx/imx8-ddrc.c                 |  107 ++
 arch/arm/mach-imx/include/mach/imx8-ddrc.h    |   66 ++
 common/clock.c                                |    8 +-
 drivers/nvmem/ocotp.c                         |    1 +
 firmware/Kconfig                              |    3 +
 firmware/Makefile                             |    6 +
 images/Makefile.imx                           |    7 +
 include/clock.h                               |   14 +
 include/linux/iopoll.h                        |   69 ++
 scripts/imx/imx-image.c                       |   99 +-
 scripts/imx/imx.c                             |   23 +-
 scripts/imx/imx.h                             |    2 +
 29 files changed, 2463 insertions(+), 42 deletions(-)
 create mode 100644 Documentation/boards/imx/nxp-imx8mq-evk.rst
 create mode 100644 arch/arm/boards/nxp-imx8mq-evk/.gitignore
 create mode 100644 arch/arm/boards/nxp-imx8mq-evk/Makefile
 create mode 100644 arch/arm/boards/nxp-imx8mq-evk/board.c
 create mode 100644 arch/arm/boards/nxp-imx8mq-evk/ddr.h
 create mode 100644 arch/arm/boards/nxp-imx8mq-evk/ddr_init.c
 create mode 100644 arch/arm/boards/nxp-imx8mq-evk/ddrphy_train.c
 create mode 100644 arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
 create mode 100644 arch/arm/boards/nxp-imx8mq-evk/lowlevel.c
 create mode 100644 arch/arm/configs/imx_v8_defconfig
 create mode 100644 arch/arm/dts/imx8mq-evk.dts
 create mode 100644 arch/arm/mach-imx/imx8-ddrc.c
 create mode 100644 arch/arm/mach-imx/include/mach/imx8-ddrc.h
 create mode 100644 include/linux/iopoll.h

-- 
2.17.0




More information about the barebox mailing list