[PATCH] ARM: i.MX53 TX53: remove duplicate _imx53

[Sascha Hauer]

The pblx-y variables for the TX53 have _imx53 twice in their names. With
this the names do not match the names in the FILE_* variables. This
results in the make system removing the pblx files as intermediate
files. Fix the names.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 images/Makefile.imx | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/images/Makefile.imx b/images/Makefile.imx
index ac46d51c59..90da95d4d0 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -139,17 +139,17 @@ CFG_start_imx53_mba53_1gib.pblx.imximg = $(board)/tqma53/flash-header-tq-tqma53-
 FILE_barebox-tq-mba53-1gib.img = start_imx53_mba53_1gib.pblx.imximg
 image-$(CONFIG_MACH_TQMA53) += barebox-tq-mba53-1gib.img
 
-pblx-$(CONFIG_MACH_TX53) += start_imx53_imx53_tx53_xx30_samsung
+pblx-$(CONFIG_MACH_TX53) += start_imx53_tx53_xx30_samsung
 CFG_start_imx53_tx53_xx30_samsung.pblx.imximg = $(board)/karo-tx53/flash-header-tx53-revxx30-samsung.imxcfg
 FILE_barebox-tx53-xx30-samsung.img = start_imx53_tx53_xx30_samsung.pblx.imximg
 image-$(CONFIG_MACH_TX53) += barebox-tx53-xx30-samsung.img
 
-pblx-$(CONFIG_MACH_TX53) += start_imx53_imx53_tx53_xx30
+pblx-$(CONFIG_MACH_TX53) += start_imx53_tx53_xx30
 CFG_start_imx53_tx53_xx30.pblx.imximg = $(board)/karo-tx53/flash-header-tx53-revxx30.imxcfg
 FILE_barebox-tx53-xx30.img = start_imx53_tx53_xx30.pblx.imximg
 image-$(CONFIG_MACH_TX53) += barebox-tx53-xx30.img
 
-pblx-$(CONFIG_MACH_TX53) += start_imx53_imx53_tx53_1011
+pblx-$(CONFIG_MACH_TX53) += start_imx53_tx53_1011
 CFG_start_imx53_tx53_1011.pblx.imximg = $(board)/karo-tx53/flash-header-tx53-rev1011.imxcfg
 FILE_barebox-tx53-1011.img = start_imx53_tx53_1011.pblx.imximg
 image-$(CONFIG_MACH_TX53) += barebox-tx53-1011.img
-- 
2.16.1