[PATCH] ARM: Add Advantech imx6 board support
Sascha Hauer
s.hauer at pengutronix.de
Fri Apr 6 12:21:34 PDT 2018
Hi Christoph,
On Thu, Apr 05, 2018 at 03:15:49PM +0200, Christoph Fritz wrote:
> + phy_register_fixup_for_uid(0x004dd072, 0xffffffef, ar8035_phy_fixup);
> +
> + switch (bootsource_get()) {
> + case BOOTSOURCE_MMC:
> + environment_path = basprintf("/chosen/environment-sd%d",
> + bootsource_get_instance() + 1);
> + envdev = "MMC";
> + break;
> + case BOOTSOURCE_SPI:
> + default:
> + environment_path = basprintf("/chosen/environment-sd4");
> + envdev = "MMC";
> + break;
> + }
> +
> + if (environment_path) {
> + ret = of_device_enable_path(environment_path);
> + if (ret < 0)
> + pr_warn("Failed to enable env partition '%s' (%d)\n",
> + environment_path, ret);
> + free(environment_path);
> + }
> +
> + pr_notice("Using environment in %s\n", envdev);
This is always "MMC", not very informative. Maybe "eMMC" and "external
SD"?
> +
> + imx6_bbu_internal_mmc_register_handler("mmc3", "/dev/mmc3",
> + BBU_HANDLER_FLAG_DEFAULT);
That would be the eMMC, right? For this I can recommend putting barebox
into the boot partitions of the eMMC. Normally there are two of them
and with imx6_bbu_internal_mmcboot_register_handler() you even get a
robust barebox A/B update mechanism.
> +
> + return 0;
> +}
> +device_initcall(advantech_mx6_devices_init);
> diff --git a/arch/arm/boards/advantech-mx6/flash-header-advantech-rom-7421.imxcfg b/arch/arm/boards/advantech-mx6/flash-header-advantech-rom-7421.imxcfg
> new file mode 100644
> index 0000000..611e06b
> --- /dev/null
> +++ b/arch/arm/boards/advantech-mx6/flash-header-advantech-rom-7421.imxcfg
> @@ -0,0 +1,73 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +wm 32 0x020e0774 0x000C0000
[...]
> +wm 32 0x021b0004 0x0002556D
> +wm 32 0x021b0404 0x00011006
> +wm 32 0x021b001c 0x00000000
> +wm 32 0x020c4068 0x00C03F3F
> +wm 32 0x020c406c 0x0030FC03
> +wm 32 0x020c4070 0x0FFFC000
> +wm 32 0x020c4074 0x3FF00000
> +wm 32 0x020c4078 0x00FFF300
> +wm 32 0x020c407c 0x0F0000C3
> +wm 32 0x020c4080 0x000003FF
Please remove writing these clock registers here. The registers get
overwritten in a few moments by barebox anyway. Often enough these gate
settings disable the USB clocks and then booting this image from USB is
no longer possible.
> +wm 32 0x020e0010 0xF00000CF
> +wm 32 0x020e0018 0x007F007F
> +wm 32 0x020e001c 0x007F007F
> diff --git a/arch/arm/boards/advantech-mx6/lowlevel.c b/arch/arm/boards/advantech-mx6/lowlevel.c
> new file mode 100644
> index 0000000..5efb91a
> --- /dev/null
> +++ b/arch/arm/boards/advantech-mx6/lowlevel.c
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright (C) 2018 Christoph Fritz <chf.fritz at googlemail.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <debug_ll.h>
> +#include <common.h>
> +#include <asm/barebox-arm-head.h>
> +#include <asm/barebox-arm.h>
> +#include <image-metadata.h>
> +#include <mach/generic.h>
> +#include <mach/esdctl.h>
> +#include <linux/sizes.h>
> +
> +static inline void setup_uart(void)
> +{
> + void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
> +
> + writel(0x3, iomuxbase + 0x4c);
> +
> + imx6_ungate_all_peripherals();
> + imx6_uart_setup_ll();
> +
> + putc_ll('>');
> +}
> +
> +extern char __dtb_imx6dl_advantech_rom_7421_start[];
> +
> +BAREBOX_IMD_TAG_STRING(advantech_imx6dl_memsize_512M, IMD_TYPE_PARAMETER,
> + "memsize=512", 0);
> +
> +ENTRY_FUNCTION(start_advantech_imx6dl_rom_7421, r0, r1, r2)
> +{
> + void *fdt;
> +
> + imx6_cpu_lowlevel_init();
> +
> + arm_setup_stack(0x00920000 - 8);
> +
> + IMD_USED(advantech_imx6dl_memsize_512M);
> +
> + if (IS_ENABLED(CONFIG_DEBUG_LL))
> + setup_uart();
> +
> + fdt = __dtb_imx6dl_advantech_rom_7421_start - get_runtime_offset();
Since "a43e2bbc46 ARM: return positive offset in get_runtime_offset()"
this must be '+' get_runtime_offset();
> +#include <dt-bindings/gpio/gpio.h>
> +#include <arm/imx6dl.dtsi>
> +#include "imx6dl.dtsi"
> +
> +/ {
> + model = "Advantech i.MX6 ROM-7421";
> + compatible = "advantech,imx6dl-rom-7421", "fsl,imx6dl";
> +
> + chosen {
> + linux,stdout-path = &uart1;
just stdout-path. linux,stdout-path is the old binding.
> +
> + environment-sd2 { /* Micro SD */
> + compatible = "barebox,environment";
> + device-path = &usdhc2, "partname:barebox-environment";
> + status = "disabled";
> + };
> +
> + environment-sd4 { /* eMMC */
> + compatible = "barebox,environment";
> + device-path = &usdhc4, "partname:barebox-environment";
> + status = "disabled";
> + };
> + };
> +};
> +
> +&ecspi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio3 19 0>;
> + status = "okay";
> +
> + flash: m25p80 at 0 {
> + compatible = "m25p80";
> + spi-max-frequency = <20000000>;
> + reg = <0>;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 400 {
> + label = "SPL";
> + reg = <0x400 0xa0000>;
> + };
> +
> + partition at d0000 {
> + label = "MAC";
> + reg = <0xd0000 0x1000>;
> + };
What's in the free space? If you can use the space up to 0xd0000 then
you could put a full barebox before it instead of just a SPL (I guess
this partitioning comes from the original vendor, right?)
> + };
> +};
> +
> +&usdhc4 { /* eMMC */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc4>;
> + bus-width = <8>;
> + non-removable;
> + no-1-8-v;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 400 {
> + label = "CRC";
> + reg = <0x200000 0x200>;
> + };
> +
> + partition at 600 {
> + label = "barebox_CRCed";
> + reg = <0x200200 0x96000>;
> + };
> +
> + partition at 96600 {
> + label = "barebox-environment";
> + reg = <0x296200 0x20000>;
> + };
the @adr in the partition names do not match the actual start of the
partitions, this should be fixed. Overall the partitions look strange.
Aren't barebox_CRCed and barebox-environment in somewhere in the middle
of the device which is already occupied by the regular partitions?
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> +
> + imx6dl-advantech-rom-742 {
This additional subnode is obsolete, please remove and move the pinctrl
nodes one level up.
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index eb135c3..e4de3d1 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -39,6 +39,7 @@ config ARCH_TEXT_BASE
> default 0x4fc00000 if MACH_UDOO
> default 0x4fc00000 if MACH_VARISCITE_MX6
> default 0x4fc00000 if MACH_PHYTEC_SOM_IMX6
> + default 0x4fc00000 if MACH_ADVANTECH_ROM_742X
You shouldn't need this.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list