[PATCH 05/12] mci: mmci: add DT support
Lucas Stach
l.stach at pengutronix.de
Fri Sep 15 01:39:15 PDT 2017
Just adds the minimal implementation to fill platform_data from
the DT properties with Linux binding.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
drivers/mci/mmci.c | 39 ++++++++++++++++++++++++++++++++++++---
1 file changed, 36 insertions(+), 3 deletions(-)
diff --git a/drivers/mci/mmci.c b/drivers/mci/mmci.c
index 7489ee03a13c..f45557d4f7be 100644
--- a/drivers/mci/mmci.c
+++ b/drivers/mci/mmci.c
@@ -532,9 +532,37 @@ static void mci_set_ios(struct mci_host *mci, struct mci_ios *ios)
udelay(CLK_CHANGE_DELAY);
}
+static int mmci_of_parse(struct device_node *np,
+ struct mmci_platform_data *plat)
+{
+ if (!IS_ENABLED(CONFIG_OFDEVICE))
+ return 0;
+
+ if (of_get_property(np, "st,sig-dir-dat0", NULL))
+ plat->sigdir |= MCI_ST_DATA0DIREN;
+ if (of_get_property(np, "st,sig-dir-dat2", NULL))
+ plat->sigdir |= MCI_ST_DATA2DIREN;
+ if (of_get_property(np, "st,sig-dir-dat31", NULL))
+ plat->sigdir |= MCI_ST_DATA31DIREN;
+ if (of_get_property(np, "st,sig-dir-dat74", NULL))
+ plat->sigdir |= MCI_ST_DATA74DIREN;
+ if (of_get_property(np, "st,sig-dir-cmd", NULL))
+ plat->sigdir |= MCI_ST_CMDDIREN;
+ if (of_get_property(np, "st,sig-pin-fbclk", NULL))
+ plat->sigdir |= MCI_ST_FBCLKEN;
+
+ if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL))
+ plat->capabilities |= MMC_CAP_MMC_HIGHSPEED;
+ if (of_get_property(np, "mmc-cap-sd-highspeed", NULL))
+ plat->capabilities |= MMC_CAP_SD_HIGHSPEED;
+
+ return 0;
+}
+
static int mmci_probe(struct amba_device *dev, const struct amba_id *id)
{
struct device_d *hw_dev = &dev->dev;
+ struct device_node *np = hw_dev->device_node;
struct mmci_platform_data *plat = hw_dev->platform_data;
struct variant_data *variant = id->data;
u32 sdi_u32;
@@ -542,11 +570,16 @@ static int mmci_probe(struct amba_device *dev, const struct amba_id *id)
struct clk *clk;
int ret;
- if (!plat) {
- dev_err(hw_dev, "missing platform data\n");
+ if (!plat && !np) {
+ dev_err(hw_dev, "missing platform data or DT node\n");
return -EINVAL;
}
+ if (!plat)
+ plat = xzalloc(sizeof(*plat));
+
+ mmci_of_parse(np, plat);
+
host = xzalloc(sizeof(*host));
host->base = amba_get_mem_region(dev);
@@ -625,7 +658,7 @@ static int mmci_probe(struct amba_device *dev, const struct amba_id *id)
host->mci.max_req_size = (1 << variant->datalength_bits) - 1;
host->mci.host_caps = plat->capabilities;
- host->mci.voltages = plat->ocr_mask;
+ host->mci.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | plat->ocr_mask;
mci_register(&host->mci);
--
2.11.0
More information about the barebox
mailing list