[PATCH] efi: add iBASE MI991AF documentation.

[Sascha Hauer]

On Wed, Sep 06, 2017 at 04:27:37PM +0200, Oleksij Rempel wrote:
> From: Oleksij Rempel <o.rempel at pengutronix.de>
> 
> Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> ---
>  Documentation/boards/efi.rst           |  2 ++
>  Documentation/boards/ibase-mi991af.rst | 43 ++++++++++++++++++++++++++++++++++
>  2 files changed, 45 insertions(+)
>  create mode 100644 Documentation/boards/ibase-mi991af.rst

Applied, thanks

Sascha

> 
> diff --git a/Documentation/boards/efi.rst b/Documentation/boards/efi.rst
> index 6c90e6cdf..f59bb1d5b 100644
> --- a/Documentation/boards/efi.rst
> +++ b/Documentation/boards/efi.rst
> @@ -1,3 +1,5 @@
> +.. _barebox_on_uefi:
> +
>  barebox on (U)EFI
>  =================
>  
> diff --git a/Documentation/boards/ibase-mi991af.rst b/Documentation/boards/ibase-mi991af.rst
> new file mode 100644
> index 000000000..a22e5fcf7
> --- /dev/null
> +++ b/Documentation/boards/ibase-mi991af.rst
> @@ -0,0 +1,43 @@
> +iBASE MI991AF
> +=============
> +
> +The iBASE MI991AF Mini-ITX motherboard has
> +
> +  * 7th/6th Generation Intel® Xeon® E3 / Core™ i7 / i5 /i3 / Pentium® / Celeron® QC/DC processors, up to 4GHz
> +  * 2x DDR4 SO-DIMM, Max. 32GB, ECC compatible
> +  * Intel® Processor integrated graphics device, supports DVI-D, HDMI and DisplayPort
> +  * Dual Intel® Gigabit LAN
> +  * 2x USB 2.0, 6x USB 3.0, 4x COM, 4x SATAIII
> +  * 2x Mini PCI-E slots, 1x mSATA, 1x PCI-E(x16)
> +  * Watchdog timer, Digital I/O, iAMT (11.0), TPM (1.2), iSMART
> +
> +Running barebox
> +---------------
> +
> +Building the barebox image for this target is covered by the ``efi_defconfig``
> +
> +BIOS should be configured as follow:
> +
> +  * When you turn on the computer, the BIOS is immediately activated. Pressing
> +    the <Del> key immediately allows you to enter the BIOS Setup utility. If you are
> +    a little bit late pressing the <Del> key, POST (Power On Self Test) will
> +    continue with its test routines, thus preventing you from invoking the Setup.
> +    In this case restart the system by pressing the ”Reset” button or simultaneously
> +    pressing the <Ctrl>, <Alt> and <Delete> keys. You can also restart by turning the
> +    system Off and back On again.
> +  * Reset BIOS settings. With this step we wont to make sure BIOS has defined common state to avoid
> +    undocumented issues. Switch to "Save & Exit" tab, choice "Restore Defaults"
> +    and press Enter. Answer "Yes" and press Enter again. Then choice "Save Changes and Exit"
> +    and press Enter.
> +  * Enable UEFI support. Switch to "Boot" tab. Choice "Boot mode select" and set it to "UEFI".
> +    Switch in the "Save & Exit" tab to "Save Changes and Exit" and press Enter.
> +
> +To make network work in barebox you will need to prepare efi binary network drivers and put them in to
> +"network-drivers" directory.
> +
> +To continue please proceed with barebox :ref:`barebox_on_uefi` documentation.
> +
> +Links
> +-----
> +
> +  * https://www.ibase.com.tw/english/ProductDetail/EmbeddedComputing/MI991 
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |