State Framework and dtb

Sascha Hauer s.hauer at pengutronix.de
Fri Mar 31 06:00:58 PDT 2017


On Fri, Mar 31, 2017 at 02:41:19PM +0300, Çağlar Kilimci wrote:
> Hey,
> 
> >> > Ok, here's your problem. I assume you edited
> >> > arch/arm/dts/am335x-phytec-phycore-som.dts, right? Could you send the
> >> > diff to that file (or to the one you edited)? There must be something
> >> > wrong here.
> >>
> >> Actually, I was using arch/arm/boot/dts/am335x-phycore-som.dtsi in the
> >> linux-ti kernel and the diff is:
> >
> > Ok, when you're changing the Linux dts then barebox of course doesn't
> > know about this.
> >
> >>
> >> Let me edit "arch/arm/dts/am335x-phytec-phycore-som.dts" and try it.
> >
> > Yes, please. That sounds better.
> 
> I tried but got the same result and then I would like to apply your
> serious patch series of the state framework but release that our
> working branch is 2016.07 so could not apply patches. Let me update
> barebox and apply those patches. Are those based on master branch
> right?  Or, which branch do you recommend to work on?

The patches are based on master, yes. Anyway, you seem to have a problem
in getting your changes in the dts file to the running barebox. Please
try to add some nodes/properties to your dts file and verify that a
of_dump shows these nodes. Before that is the case it's not worth to
look any further.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list