[PATCH 05/11] mci: atmel_mci: Add DT support
Andrey Smirnov
andrew.smirnov at gmail.com
Tue Mar 14 08:52:16 PDT 2017
Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
drivers/mci/atmel_mci.c | 101 +++++++++++++++++++++++++++++++++---------------
1 file changed, 70 insertions(+), 31 deletions(-)
diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index 2a0ddb0..317cf46 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -24,6 +24,7 @@
#include <mach/board.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <of_gpio.h>
#include "atmel-mci-regs.h"
@@ -53,6 +54,7 @@ struct atmel_mci {
u32 cfg_reg;
u32 sdc_reg;
bool need_reset;
+ int detect_pin;
};
#define to_mci_host(mci) container_of(mci, struct atmel_mci, mci)
@@ -360,14 +362,13 @@ static int atmci_start_cmd(struct atmel_mci *host, struct mci_cmd *cmd,
static int atmci_card_present(struct mci_host *mci)
{
struct atmel_mci *host = to_mci_host(mci);
- struct atmel_mci_platform_data *pd = host->hw_dev->platform_data;
int ret;
/* No gpio, assume card is present */
- if (!gpio_is_valid(pd->detect_pin))
+ if (!gpio_is_valid(host->detect_pin))
return 1;
- ret = gpio_get_value(pd->detect_pin);
+ ret = gpio_get_value(host->detect_pin);
return ret == 0 ? 1 : 0;
}
@@ -535,44 +536,71 @@ static int atmci_probe(struct device_d *hw_dev)
{
struct resource *iores;
struct atmel_mci *host;
+ struct device_node *np = hw_dev->device_node;
struct atmel_mci_platform_data *pd = hw_dev->platform_data;
int ret;
- if (!pd) {
- dev_err(hw_dev, "missing platform data\n");
- return -EINVAL;
+ host = xzalloc(sizeof(*host));
+ host->mci.send_cmd = atmci_request;
+ host->mci.set_ios = atmci_set_ios;
+ host->mci.init = atmci_reset;
+ host->mci.card_present = atmci_card_present;
+ host->mci.hw_dev = hw_dev;
+ host->detect_pin = -EINVAL;
+
+ if (pd) {
+ host->detect_pin = pd->detect_pin;
+ host->mci.devname = pd->devname;
+
+ if (pd->bus_width >= 4)
+ host->mci.host_caps |= MMC_CAP_4_BIT_DATA;
+ if (pd->bus_width == 8)
+ host->mci.host_caps |= MMC_CAP_8_BIT_DATA;
+
+ host->slot_b = pd->slot_b;
+ } else if (np) {
+ u32 slot_id;
+ struct device_node *cnp;
+ const char *alias = of_alias_get(np);
+
+ if (alias)
+ host->mci.devname = xstrdup(alias);
+
+ host->detect_pin = of_get_named_gpio(np, "cd-gpios", 0);
+
+ for_each_child_of_node(np, cnp) {
+ if (of_property_read_u32(cnp, "reg", &slot_id)) {
+ dev_warn(hw_dev, "reg property is missing for %s\n",
+ cnp->full_name);
+ continue;
+ }
+
+ host->slot_b = slot_id;
+ mci_of_parse_node(&host->mci, cnp);
+ break;
+ }
+ } else {
+ dev_err(hw_dev, "Missing device information\n");
+ ret = -EINVAL;
+ goto error_out;
}
- if (gpio_is_valid(pd->detect_pin)) {
- ret = gpio_request(pd->detect_pin, "mci_cd");
+ if (gpio_is_valid(host->detect_pin)) {
+ ret = gpio_request(host->detect_pin, "mci_cd");
if (ret) {
dev_err(hw_dev, "Impossible to request CD gpio %d (%d)\n",
- ret, pd->detect_pin);
- return ret;
+ ret, host->detect_pin);
+ goto error_out;
}
- ret = gpio_direction_input(pd->detect_pin);
+ ret = gpio_direction_input(host->detect_pin);
if (ret) {
dev_err(hw_dev, "Impossible to configure CD gpio %d as input (%d)\n",
- ret, pd->detect_pin);
- goto err_gpio_cd_request;
+ ret, host->detect_pin);
+ goto error_out;
}
}
- host = xzalloc(sizeof(*host));
- host->mci.send_cmd = atmci_request;
- host->mci.set_ios = atmci_set_ios;
- host->mci.init = atmci_reset;
- host->mci.card_present = atmci_card_present;
- host->mci.hw_dev = hw_dev;
- host->mci.devname = pd->devname;
-
- if (pd->bus_width >= 4)
- host->mci.host_caps |= MMC_CAP_4_BIT_DATA;
- if (pd->bus_width == 8)
- host->mci.host_caps |= MMC_CAP_8_BIT_DATA;
- host->slot_b = pd->slot_b;
-
iores = dev_request_mem_resource(hw_dev, 0);
if (IS_ERR(iores))
return PTR_ERR(iores);
@@ -583,7 +611,7 @@ static int atmci_probe(struct device_d *hw_dev)
if (IS_ERR(host->clk)) {
dev_err(hw_dev, "no mci_clk\n");
ret = PTR_ERR(host->clk);
- goto err_gpio_cd_request;
+ goto error_out;
}
clk_enable(host->clk);
@@ -614,15 +642,26 @@ static int atmci_probe(struct device_d *hw_dev)
return 0;
-err_gpio_cd_request:
- if (gpio_is_valid(pd->detect_pin))
- gpio_free(pd->detect_pin);
+error_out:
+ free(host);
+
+ if (gpio_is_valid(host->detect_pin))
+ gpio_free(host->detect_pin);
return ret;
}
+static __maybe_unused struct of_device_id atmci_compatible[] = {
+ {
+ .compatible = "atmel,hsmci",
+ }, {
+ /* sentinel */
+ }
+};
+
static struct driver_d atmci_driver = {
.name = "atmel_mci",
.probe = atmci_probe,
+ .of_compatible = DRV_OF_COMPAT(atmci_compatible),
};
device_platform_driver(atmci_driver);
--
2.9.3
More information about the barebox
mailing list