[PATCH] clk: imx: clk-imx6ul: Use anatop_base pointer for consistency

[Sascha Hauer]

On Fri, Mar 03, 2017 at 10:47:49AM +0100, Robin van der Gracht wrote:
> The anatop_base pointer was unused, but instead of removing it, assign
> and use it for readability like clk-imx6 and clk-imx6sx do.
> 
> Signed-off-by: Robin van der Gracht <robin at protonic.nl>
> ---
>  drivers/clk/imx/clk-imx6ul.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
> index 0ca0652..f28660d 100644
> --- a/drivers/clk/imx/clk-imx6ul.c
> +++ b/drivers/clk/imx/clk-imx6ul.c
> @@ -91,6 +91,7 @@ static int imx6_ccm_probe(struct device_d *dev)
>  	int i;
>  	struct device_node *ccm_node = dev->device_node;
>  
> +	anatop_base = IOMEM(MX6_ANATOP_BASE_ADDR);
>  	iores = dev_request_mem_resource(dev, 0);
>  	if (IS_ERR(iores))
>  		return PTR_ERR(iores);
> @@ -100,8 +101,6 @@ static int imx6_ccm_probe(struct device_d *dev)
>  
>  	clks[IMX6UL_CLK_DUMMY] = clk_fixed("dummy", 0);
>  
> -	base = IOMEM(MX6_ANATOP_BASE_ADDR);
> -
>  	clks[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
>  	clks[IMX6UL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
>  	clks[IMX6UL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> -- 
> 2.9.3
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |