[PATCH] i.MX/WD: setup the watchdog according to its datasheet
Sascha Hauer
s.hauer at pengutronix.de
Wed Jun 7 04:59:16 PDT 2017
On Wed, Jun 07, 2017 at 12:45:42PM +0200, Juergen Borleis wrote:
> From earlier SoCs like the i.MX21 up to i.MX7 their datasheets states
> after reset the watchdog timer has to be set first prior enabling the
> watchdog itself. This change do it this way.
>
> Signed-off-by: Juergen Borleis <jbe at pengutronix.de>
> ---
> drivers/watchdog/imxwd.c | 6 ++++++
> 1 file changed, 6 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/drivers/watchdog/imxwd.c b/drivers/watchdog/imxwd.c
> index b920c7234..5cc178f3e 100644
> --- a/drivers/watchdog/imxwd.c
> +++ b/drivers/watchdog/imxwd.c
> @@ -114,6 +114,12 @@ static int imx21_watchdog_set_timeout(struct imx_wd *priv, unsigned timeout)
> if (priv->ext_reset)
> val |= IMX21_WDOG_WCR_WDT;
>
> + /*
> + * set time and some write once bits first prior enabling the
> + * watchdog according to the datasheet
> + */
> + writew(val, priv->base + IMX21_WDOG_WCR);
> +
> writew(IMX21_WDOG_WCR_WDE | val, priv->base + IMX21_WDOG_WCR);
>
> /* Write Service Sequence */
> --
> 2.11.0
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list