[PATCH v3 4/4] arm: boards: beaglebone: Delete default env
Daniel Schultz
d.schultz at phytec.de
Tue Jun 6 03:57:43 PDT 2017
Hi Sascha,
Am 17.05.2017 um 08:35 schrieb Sascha Hauer:
> On Fri, May 12, 2017 at 01:07:19PM +0200, Daniel Schultz wrote:
>> The Beaglebone environment should be set from outside with an application
>> specific environment.
>>
>> Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
>> ---
>> arch/arm/boards/beaglebone/Makefile | 1 -
>> arch/arm/boards/beaglebone/board.c | 2 --
>> arch/arm/boards/beaglebone/defaultenv-beaglebone/boot/sd | 6 ------
>> .../arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300 | 5 -----
>> 4 files changed, 14 deletions(-)
>> delete mode 100644 arch/arm/boards/beaglebone/defaultenv-beaglebone/boot/sd
>> delete mode 100644 arch/arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300
>>
>> --- a/arch/arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300
>> +++ /dev/null
>> @@ -1,5 +0,0 @@
>> -#!/bin/sh
>> -
>> -echo -n "changing USB current limit to 1300 mA... "
>> -i2c_write -b 0 -a 0x24 -r 0x01 0x3e
>> -echo "done"
>
> We need this on the beagleboard. We can't just delete it without doing
> this somewhere else.
>
> Also I still do not understand the reasoning behind this change. Where
> is "outside", to which application should the environment be specific
> to?
Please revoke this patch. Sorry.
>
> Sascha
>
--
Mit freundlichen Grüßen,
With best regards,
Daniel Schultz
More information about the barebox
mailing list