[PATCH v3 0/4] GPIO "active low", hogging and usb-nop-xceive 'reset-gpio' support
Sascha Hauer
s.hauer at pengutronix.de
Mon Jun 5 23:27:28 PDT 2017
On Sat, Jun 03, 2017 at 08:11:50PM -0700, Andrey Smirnov wrote:
> Hi everyone,
>
> This is a v3 of my original patchset. Changes in this version are the following:
>
> - new flags, GPIOF_INIT_[IN]ACTIVE and GPIOF_OUT_INIT_[IN]ACTIVE are
> added to avoid semantically overloading the meaing of "HIGH/LOW"
> variants of those
>
> - added commentary about GPIO 'hog' interpretation of the meaning of
> 'output-high', 'output-low'
>
> Changes since v1:
>
> - 'active low' support is moved inot a dedicated API
> - of_gpiochip_scan_gpios renamed to of_gpiochip_scan_hogs
> - nop_usbphy_init doesn't try to needlessly configure reset gpio's directionality
>
> Let me know if anything else needs changing.
>
> Thanks,
> Andrey Smirnov
Applied, thanks
Sascha
>
> Andrey Smirnov (4):
> gpio-imx: Do not use gpio_set_value()
> gpiolib: Add code to support "active low" GPIOs
> gpiolib: Add support for GPIO "hog" nodes
> usb-nop-xceiv: Add support for 'reset-gpios' binding
>
> drivers/gpio/gpio-imx.c | 2 +-
> drivers/gpio/gpiolib.c | 146 ++++++++++++++++++++++++++++++++++++++++++--
> drivers/phy/usb-nop-xceiv.c | 45 ++++++++++++--
> include/gpio.h | 25 ++++++++
> 4 files changed, 208 insertions(+), 10 deletions(-)
>
> --
> 2.9.4
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list