[PATCH v2 0/3] imx6ul: add Technexion Pico Hobbit support
Michael Grzeschik
m.grzeschik at pengutronix.de
Fri Jun 2 06:18:05 PDT 2017
This series adds support for the Technexion Pico Hobbit. It also
prepares the TX_CLK_DIR pins for imx6ul platforms. This way it
will not be needed in every imx6ul based board files.
Michael Grzeschik (3):
ARM: i.MX: setup ENET_TX_CLK_DIR in imx6_init for every imx6ul
ARM: phytec-som-imx6: remove needles enet refclk setup
ARM: i.MX6: add Technexion Pico Hobbit support
arch/arm/boards/Makefile | 1 +
arch/arm/boards/phytec-som-imx6/board.c | 23 ++-----
arch/arm/boards/technexion-pico-hobbit/Makefile | 7 ++
arch/arm/boards/technexion-pico-hobbit/board.c | 63 +++++++++++++++++
.../defaultenv-pico-hobbit/init/automount | 11 +++
.../defaultenv-pico-hobbit/network/eth1 | 18 +++++
.../flash-header-imx6ul-pico-hobbit-256.imxcfg | 64 ++++++++++++++++++
.../flash-header-imx6ul-pico-hobbit-512.imxcfg | 65 ++++++++++++++++++
arch/arm/boards/technexion-pico-hobbit/lowlevel.c | 78 ++++++++++++++++++++++
arch/arm/configs/imx_v7_defconfig | 1 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx6ul-pico-hobbit.dts | 44 ++++++++++++
arch/arm/mach-imx/Kconfig | 6 ++
arch/arm/mach-imx/imx6.c | 11 +++
images/Makefile.imx | 10 +++
15 files changed, 384 insertions(+), 19 deletions(-)
create mode 100644 arch/arm/boards/technexion-pico-hobbit/Makefile
create mode 100644 arch/arm/boards/technexion-pico-hobbit/board.c
create mode 100644 arch/arm/boards/technexion-pico-hobbit/defaultenv-pico-hobbit/init/automount
create mode 100644 arch/arm/boards/technexion-pico-hobbit/defaultenv-pico-hobbit/network/eth1
create mode 100644 arch/arm/boards/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-256.imxcfg
create mode 100644 arch/arm/boards/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-512.imxcfg
create mode 100644 arch/arm/boards/technexion-pico-hobbit/lowlevel.c
create mode 100644 arch/arm/dts/imx6ul-pico-hobbit.dts
--
2.11.0
More information about the barebox
mailing list