[PATCH] ARM: i.MX6: add Technexion Pico Hobbit support

Tue Apr 11 01:35:40 PDT 2017

On Mon, Apr 10, 2017 at 07:55:59PM +0200, Michael Grzeschik wrote:
> This adds support support for the i.MX6UL Technexion Pico Hobbit.
> The board comes with different amounts of RAM. We create one image
> for the 256MB and one for the 512MB variant.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> ---
>  arch/arm/boards/Makefile                           |   1 +
>  arch/arm/boards/technexion-pico-hobbit/Makefile    |   7 ++
>  arch/arm/boards/technexion-pico-hobbit/board.c     | 105 +++++++++++++++++++++
>  .../defaultenv-pico-hobbit/init/automount          |  11 +++
>  .../defaultenv-pico-hobbit/network/eth1            |  18 ++++
>  .../flash-header-imx6ul-pico-hobbit-256.imxcfg     |  64 +++++++++++++
>  .../flash-header-imx6ul-pico-hobbit-512.imxcfg     |  65 +++++++++++++
>  arch/arm/boards/technexion-pico-hobbit/lowlevel.c  |  78 +++++++++++++++
>  arch/arm/configs/imx_v7_defconfig                  |   1 +
>  arch/arm/dts/Makefile                              |   1 +
>  arch/arm/dts/imx6ul-pico-hobbit.dts                |  27 ++++++
>  arch/arm/mach-imx/Kconfig                          |   6 ++
>  images/Makefile.imx                                |  10 ++
>  13 files changed, 394 insertions(+)
>  create mode 100644 arch/arm/boards/technexion-pico-hobbit/Makefile
>  create mode 100644 arch/arm/boards/technexion-pico-hobbit/board.c
>  create mode 100644 arch/arm/boards/technexion-pico-hobbit/defaultenv-pico-hobbit/init/automount
>  create mode 100644 arch/arm/boards/technexion-pico-hobbit/defaultenv-pico-hobbit/network/eth1
>  create mode 100644 arch/arm/boards/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-256.imxcfg
>  create mode 100644 arch/arm/boards/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-512.imxcfg
>  create mode 100644 arch/arm/boards/technexion-pico-hobbit/lowlevel.c
>  create mode 100644 arch/arm/dts/imx6ul-pico-hobbit.dts
> 
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index 250ccb8889..d9f9d7778e 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -114,6 +114,7 @@ obj-$(CONFIG_MACH_SOCFPGA_TERASIC_DE0_NANO_SOC)	+= terasic-de0-nano-soc/
>  obj-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT)	+= terasic-sockit/
>  obj-$(CONFIG_MACH_SOLIDRUN_CUBOX)		+= solidrun-cubox/
>  obj-$(CONFIG_MACH_SOLIDRUN_MICROSOM)		+= solidrun-microsom/
> +obj-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT)	+= technexion-pico-hobbit/
>  obj-$(CONFIG_MACH_TECHNEXION_WANDBOARD)		+= technexion-wandboard/
>  obj-$(CONFIG_MACH_TNY_A9260)			+= tny-a926x/
>  obj-$(CONFIG_MACH_TNY_A9263)			+= tny-a926x/
> diff --git a/arch/arm/boards/technexion-pico-hobbit/Makefile b/arch/arm/boards/technexion-pico-hobbit/Makefile
> new file mode 100644
> index 0000000000..b60dcd2bc1
> --- /dev/null
> +++ b/arch/arm/boards/technexion-pico-hobbit/Makefile
> @@ -0,0 +1,7 @@
> +obj-y += board.o
> +lwl-y += lowlevel.o
> +extra-y += flash-header-imx6ul-pico-hobbit-256.dcd.S \
> +           flash-header-imx6ul-pico-hobbit-256.dcd \
> +           flash-header-imx6ul-pico-hobbit-512.dcd.S \
> +           flash-header-imx6ul-pico-hobbit-512.dcd
> +bbenv-y += defaultenv-pico-hobbit
> diff --git a/arch/arm/boards/technexion-pico-hobbit/board.c b/arch/arm/boards/technexion-pico-hobbit/board.c
> new file mode 100644
> index 0000000000..40b49de669
> --- /dev/null
> +++ b/arch/arm/boards/technexion-pico-hobbit/board.c
> @@ -0,0 +1,105 @@
> +/*
> + * Copyright (C) 2017 Michael Grzeschik, Pengutronix
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation.
> + *
> + */
> +
> +#include <asm/armlinux.h>
> +#include <asm/io.h>
> +#include <bootsource.h>
> +#include <common.h>
> +#include <environment.h>
> +#include <envfs.h>
> +#include <gpio.h>
> +#include <init.h>
> +#include <mach/generic.h>
> +#include <mach/imx6-regs.h>
> +#include <mach/imx6.h>
> +#include <mach/bbu.h>
> +#include <linux/sizes.h>
> +#include <linux/phy.h>
> +#include <mfd/imx6q-iomuxc-gpr.h>
> +
> +#include <linux/clk.h>
> +#include <linux/micrel_phy.h>
> +
> +static int ksz8081_phy_fixup(struct phy_device *dev)
> +{
> +	phy_write(dev, 0x1f, 0x8190);
> +	phy_write(dev, 0x16, 0x202);
> +
> +	return 0;
> +}
> +
> +static int imx6ul_setup_fec(void)
> +{
> +	void __iomem *gprbase = IOMEM(MX6_IOMUXC_BASE_ADDR) + 0x4000;
> +	uint32_t val;
> +	struct clk *clk;
> +
> +	phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK,
> +			ksz8081_phy_fixup);
> +
> +	clk = clk_lookup("enet_ptp");
> +	if (IS_ERR(clk))
> +		goto err;
> +
> +	clk_enable(clk);
> +
> +	clk = clk_lookup("enet_ref");
> +	if (IS_ERR(clk))
> +		goto err;
> +	clk_enable(clk);
> +
> +	clk = clk_lookup("enet_ref_125m");
> +	if (IS_ERR(clk))
> +		goto err;
> +
> +	clk_enable(clk);
> +
> +	val = readl(gprbase + IOMUXC_GPR1);
> +	/* Use 50M anatop loopback REF_CLK1 for ENET1, clear gpr1[13], set gpr1[17]*/
> +	val &= ~(1 << 13);
> +	val |= (1 << 17);
> +	/* Use 50M anatop loopback REF_CLK1 for ENET2, clear gpr1[14], set gpr1[18]*/
> +	val &= ~(1 << 14);
> +	val |= (1 << 18);
> +	writel(val, gprbase + IOMUXC_GPR1);
> +
> +	return 0;
> +err:
> +	pr_err("Setting up DFEC\n");
> +
> +	return -EIO;
> +}

Since this is an exact copy of imx6ul_setup_fec() in
arch/arm/boards/phytec-som-imx6/board.c we should see what we can do
better.

I can imagine that the clocks should be enabled by the fec driver, maybe
they are even enabled already there.

For the GPR setting: Maybe we should create a imx6ul_setup_fec() in
arch/arm/mach-imx which for now just hardcodes this setting so we can
extend this later.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |