[PATCH] ARM: imx6: add Hummingboard2 support
Lucas Stach
dev at lynxeye.de
Sat Apr 8 08:04:49 PDT 2017
This adds support for the Hummingboard2 baseboard for the SolidRun
MicroSOM modules.
Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
arch/arm/boards/solidrun-microsom/board.c | 19 +-
arch/arm/boards/solidrun-microsom/lowlevel.c | 42 +++
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx6dl-hummingboard2.dts | 71 ++++
arch/arm/dts/imx6q-hummingboard2.dts | 87 +++++
arch/arm/dts/imx6qdl-hummingboard2.dtsi | 536 +++++++++++++++++++++++++++
images/Makefile.imx | 30 +-
7 files changed, 781 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-hummingboard2.dts
create mode 100644 arch/arm/dts/imx6q-hummingboard2.dts
create mode 100644 arch/arm/dts/imx6qdl-hummingboard2.dtsi
diff --git a/arch/arm/boards/solidrun-microsom/board.c b/arch/arm/boards/solidrun-microsom/board.c
index b904168..155199f 100644
--- a/arch/arm/boards/solidrun-microsom/board.c
+++ b/arch/arm/boards/solidrun-microsom/board.c
@@ -78,7 +78,9 @@ static void microsom_eth_init(void)
static int hummingboard_device_init(void)
{
if (!of_machine_is_compatible("solidrun,hummingboard/dl") &&
- !of_machine_is_compatible("solidrun,hummingboard/q"))
+ !of_machine_is_compatible("solidrun,hummingboard/q") &&
+ !of_machine_is_compatible("solidrun,hummingboard2/dl") &&
+ !of_machine_is_compatible("solidrun,hummingboard2/q"))
return 0;
microsom_eth_init();
@@ -108,13 +110,26 @@ device_initcall(h100_device_init);
static int hummingboard_late_init(void)
{
+ bool emmc_present = false;
+
if (!of_machine_is_compatible("solidrun,hummingboard/dl") &&
!of_machine_is_compatible("solidrun,hummingboard/q") &&
+ !of_machine_is_compatible("solidrun,hummingboard2/dl") &&
+ !of_machine_is_compatible("solidrun,hummingboard2/q") &&
!of_machine_is_compatible("auvidea,h100"))
return 0;
+ if (of_machine_is_compatible("solidrun,hummingboard2/dl") ||
+ of_machine_is_compatible("solidrun,hummingboard2/q"))
+ emmc_present = true;
+
imx6_bbu_internal_mmc_register_handler("sdcard", "/dev/mmc1.barebox",
- BBU_HANDLER_FLAG_DEFAULT);
+ emmc_present ? 0 : BBU_HANDLER_FLAG_DEFAULT);
+
+ if (emmc_present) {
+ imx6_bbu_internal_mmc_register_handler("emmc",
+ "/dev/mmc2.barebox", BBU_HANDLER_FLAG_DEFAULT);
+ }
return 0;
}
diff --git a/arch/arm/boards/solidrun-microsom/lowlevel.c b/arch/arm/boards/solidrun-microsom/lowlevel.c
index 7b97f2e..cc15958 100644
--- a/arch/arm/boards/solidrun-microsom/lowlevel.c
+++ b/arch/arm/boards/solidrun-microsom/lowlevel.c
@@ -5,6 +5,8 @@
extern char __dtb_imx6dl_hummingboard_start[];
extern char __dtb_imx6q_hummingboard_start[];
+extern char __dtb_imx6dl_hummingboard2_start[];
+extern char __dtb_imx6q_hummingboard2_start[];
extern char __dtb_imx6q_h100_start[];
ENTRY_FUNCTION(start_hummingboard_microsom_i1, r0, r1, r2)
@@ -47,6 +49,46 @@ ENTRY_FUNCTION(start_hummingboard_microsom_i4, r0, r1, r2)
imx6q_barebox_entry(fdt);
}
+ENTRY_FUNCTION(start_hummingboard2_microsom_i1, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_imx6dl_hummingboard2_start - get_runtime_offset();
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_hummingboard2_microsom_i2, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_imx6dl_hummingboard2_start - get_runtime_offset();
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_hummingboard2_microsom_i2ex, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_imx6q_hummingboard2_start - get_runtime_offset();
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_hummingboard2_microsom_i4, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_imx6q_hummingboard2_start - get_runtime_offset();
+ imx6q_barebox_entry(fdt);
+}
+
ENTRY_FUNCTION(start_h100_microsom_i2ex, r0, r1, r2)
{
void *fdt;
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0c9e0e8..b822561 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -68,7 +68,9 @@ pbl-dtb-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += socfpga_cyclone5_socrates.dtb.o
pbl-dtb-$(CONFIG_MACH_SOCFPGA_TERASIC_DE0_NANO_SOC) += socfpga_cyclone5_de0_nano_soc.dtb.o
pbl-dtb-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o
pbl-dtb-$(CONFIG_MACH_SOLIDRUN_CUBOX) += dove-cubox-bb.dtb.o
-pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o imx6q-h100.dtb.o
+pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o \
+ imx6dl-hummingboard2.dtb.o imx6q-hummingboard2.dtb.o \
+ imx6q-h100.dtb.o
pbl-dtb-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o
pbl-dtb-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += tegra20-colibri-iris.dtb.o
pbl-dtb-$(CONFIG_MACH_TOSHIBA_AC100) += tegra20-paz00.dtb.o
diff --git a/arch/arm/dts/imx6dl-hummingboard2.dts b/arch/arm/dts/imx6dl-hummingboard2.dts
new file mode 100644
index 0000000..40ef174
--- /dev/null
+++ b/arch/arm/dts/imx6dl-hummingboard2.dts
@@ -0,0 +1,71 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh at solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+ model = "SolidRun HummingBoard2 Solo/DualLite";
+ compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
+
+&ocotp {
+ barebox,provide-mac-address = <&fec 0x620>;
+};
+
+&usdhc3 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition at e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+};
diff --git a/arch/arm/dts/imx6q-hummingboard2.dts b/arch/arm/dts/imx6q-hummingboard2.dts
new file mode 100644
index 0000000..8906558
--- /dev/null
+++ b/arch/arm/dts/imx6q-hummingboard2.dts
@@ -0,0 +1,87 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh at solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include <arm/imx6q.dtsi>
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6q.dtsi"
+
+/ {
+ model = "SolidRun HummingBoard2 Dual/Quad";
+ compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+
+ chosen {
+ environment at 0 {
+ compatible = "barebox,environment";
+ device-path = &usdhc3, "partname:barebox-environment";
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+ fsl,transmit-level-mV = <1104>;
+ fsl,transmit-boost-mdB = <0>;
+ fsl,transmit-atten-16ths = <9>;
+ fsl,no-spread-spectrum;
+};
+
+&ocotp {
+ barebox,provide-mac-address = <&fec 0x620>;
+};
+
+&usdhc3 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition at e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+};
diff --git a/arch/arm/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/dts/imx6qdl-hummingboard2.dtsi
new file mode 100644
index 0000000..2a5f389
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-hummingboard2.dtsi
@@ -0,0 +1,536 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh at solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <arm/imx6qdl-microsom.dtsi>
+#include <arm/imx6qdl-microsom-ar8035.dtsi>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ ir_recv: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
+ linux,rc-map-name = "rc-rc6-mce";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_usbh2_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+ regulator-name = "V_USB2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usbotg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
+ regulator-name = "V_USB1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbh3_vbus: regulator-usb-h2-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ enable-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
+ regulator-name = "V_USB3";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usbh4_vbus: regulator-usb-h3-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ enable-gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
+ regulator-name = "V_USB4";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usdhc2_vmmc: reg-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "V_SD";
+ startup-delay-us = <1000>;
+ };
+
+ sound-sgtl5000 {
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "On-board Codec";
+ mux-ext-port = <5>;
+ mux-int-port = <1>;
+ ssi-controller = <&ssi1>;
+ };
+};
+
+&audmux {
+ status = "okay";
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
+ cs-gpios = <&gpio2 26 0>;
+ status = "okay";
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
+ status = "okay";
+
+ pcf8523: rtc at 68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ sgtl5000: codec at 0a {
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ VDDD-supply = <®_1p8v>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hummingboard2 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /*
+ * 36 pin headers GPIO description. The pins
+ * numbering as following -
+ *
+ * 3.2v 5v 74 75
+ * 73 72 71 70
+ * 69 68 67 66
+ *
+ * 77 78 79 76
+ * 65 64 61 60
+ * 53 52 51 50
+ * 49 48 166 132
+ * 95 94 90 91
+ * GND 54 24 204
+ *
+ * The GPIO numbers can be extracted using
+ * signal name from below.
+ * Example -
+ * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
+ * GPIO(3,10) which is (3-1)*32+10 = gpio 74
+ *
+ * i.e. The mapping of GPIO(X,Y) to Linux gpio
+ * number is : gpio number = (X-1) * 32 + Y
+ */
+ /* DI1_PIN15 */
+ MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
+ /* DI1_PIN02 */
+ MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
+ /* DISP1_DATA00 */
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
+ /* DISP1_DATA01 */
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
+ /* DISP1_DATA02 */
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
+ /* DISP1_DATA03 */
+ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
+ /* DISP1_DATA04 */
+ MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
+ /* DISP1_DATA05 */
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
+ /* DISP1_DATA06 */
+ MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
+ /* DISP1_DATA07 */
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
+ /* DI1_D0_CS */
+ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
+ /* DI1_D1_CS */
+ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
+ /* DI1_PIN01 */
+ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
+ /* DI1_PIN03 */
+ MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
+ /* DISP1_DATA08 */
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
+ /* DISP1_DATA09 */
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
+ /* DISP1_DATA10 */
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
+ /* DISP1_DATA11 */
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
+ /* DISP1_DATA12 */
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
+ /* DISP1_DATA13 */
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
+ /* DISP1_DATA14 */
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
+ /* DISP1_DATA15 */
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
+ /* DISP1_DATA16 */
+ MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
+ /* DISP1_DATA17 */
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
+ /* DISP1_DATA18 */
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
+ /* DISP1_DATA19 */
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
+ /* DISP1_DATA20 */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
+ /* DISP1_DATA21 */
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
+ /* DISP1_DATA22 */
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
+ /* DISP1_DATA23 */
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
+ /* DI1_DISP_CLK */
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
+ /* SPDIF_IN */
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
+ /* SPDIF_OUT */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
+
+ /* MikroBUS GPIO pin number 10 */
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
+ >;
+ };
+
+ pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 /* CS */
+ >;
+ };
+
+ pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
+ >;
+ };
+
+ pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_hummingboard2_mipi: hummingboard2_mipi {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
+ MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+ >;
+ };
+
+ pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
+ >;
+ };
+
+ pinctrl_hummingboard2_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
+ pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
+ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+ };
+
+ pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
+ fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
+ };
+
+ pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
+ fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
+ };
+
+ pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
+ /*
+ * Similar to pinctrl_usbotg_2, but we want it
+ * pulled down for a fixed host connection.
+ */
+ fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+ };
+
+ pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
+ fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+ };
+
+ pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
+ MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+ >;
+ };
+
+ pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+ >;
+ };
+
+ pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
+ >;
+ };
+
+ pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
+ >;
+ };
+
+ pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059
+ >;
+ };
+
+ pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000
+ >;
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
+ reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg {
+ disable-over-current;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
+ vbus-supply = <®_usbotg_vbus>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <
+ &pinctrl_hummingboard2_usdhc2_aux
+ &pinctrl_hummingboard2_usdhc2
+ >;
+ pinctrl-1 = <
+ &pinctrl_hummingboard2_usdhc2_aux
+ &pinctrl_hummingboard2_usdhc2_100mhz
+ >;
+ pinctrl-2 = <
+ &pinctrl_hummingboard2_usdhc2_aux
+ &pinctrl_hummingboard2_usdhc2_200mhz
+ >;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
+ status = "okay";
+};
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 2563779..0677cc3 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -249,16 +249,16 @@ CFG_start_imx6sx_sabresdb.pblx.imximg = $(board)/freescale-mx6sx-sabresdb/flash-
FILE_barebox-freescale-imx6sx-sabresdb.img = start_imx6sx_sabresdb.pblx.imximg
image-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += barebox-freescale-imx6sx-sabresdb.img
-pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i1
-CFG_start_hummingboard_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg
-FILE_barebox-solidrun-hummingboard-microsom-i1.img = start_hummingboard_microsom_i1.pblx.imximg
-image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i1.img
-
pblx-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += start_imx6_wandboard
CFG_start_imx6_wandboard.imx-sram-img = $(board)/technexion-wandboard/flash-header-technexion-wandboard.imxcfg
FILE_barebox-imx6-wandboard.img = start_imx6_wandboard.imx-sram-img
image-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += barebox-imx6-wandboard.img
+pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i1
+CFG_start_hummingboard_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg
+FILE_barebox-solidrun-hummingboard-microsom-i1.img = start_hummingboard_microsom_i1.pblx.imximg
+image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i1.img
+
pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i2
CFG_start_hummingboard_microsom_i2.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2.imxcfg
FILE_barebox-solidrun-hummingboard-microsom-i2.img = start_hummingboard_microsom_i2.pblx.imximg
@@ -274,6 +274,26 @@ CFG_start_hummingboard_microsom_i4.pblx.imximg = $(board)/solidrun-microsom/flas
FILE_barebox-solidrun-hummingboard-microsom-i4.img = start_hummingboard_microsom_i4.pblx.imximg
image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i4.img
+pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i1
+CFG_start_hummingboard2_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg
+FILE_barebox-solidrun-hummingboard2-microsom-i1.img = start_hummingboard2_microsom_i1.pblx.imximg
+image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i1.img
+
+pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i2
+CFG_start_hummingboard2_microsom_i2.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2.imxcfg
+FILE_barebox-solidrun-hummingboard2-microsom-i2.img = start_hummingboard2_microsom_i2.pblx.imximg
+image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i2.img
+
+pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i2ex
+CFG_start_hummingboard2_microsom_i2ex.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2eX.imxcfg
+FILE_barebox-solidrun-hummingboard2-microsom-i2eX.img = start_hummingboard2_microsom_i2ex.pblx.imximg
+image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i2eX.img
+
+pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i4
+CFG_start_hummingboard2_microsom_i4.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i4.imxcfg
+FILE_barebox-solidrun-hummingboard2-microsom-i4.img = start_hummingboard2_microsom_i4.pblx.imximg
+image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i4.img
+
pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_h100_microsom_i2ex
CFG_start_h100_microsom_i2ex.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2eX.imxcfg
FILE_barebox-auvidea-h100-microsom-i2eX.img = start_h100_microsom_i2ex.pblx.imximg
--
2.9.3
More information about the barebox
mailing list