Loading kernel issues

[Javier Fileiv]

Hello Juergen,

Here is my power up output, thanks you very much

Terminal ready


barebox 2011.05.0-ptx-2014.11.0 (Oct 13 2016 - 21:53:08)

Board: Mini 2440
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
Bad block table found at page 524224, version 0x01
Bad block table found at page 524160, version 0x01
nand_read_bbt: Bad block at 0x255a0000
dm9000 i/o: 0x20000300, id: 0x90000a46
eth at eth0: got MAC address from EEPROM: 00:00:00:00:00:00
cfi_probe: cfi_flash base: 0x00000000 size: 0x00200000
## Unknown FLASH on Bank at 0x00000000 - Size = 0x00000000 = 0 MB
refclk:    12000 kHz
mpll:     405000 kHz
upll:      48000 kHz
fclk:     405000 kHz
hclk:     101250 kHz
pclk:      50625 kHz
SDRAM1:   CL2 at 101MHz
Malloc space: 0x33a00000 -> 0x33e00000 (size  4 MB)
Stack space : 0x339f8000 -> 0x33a00000 (size 32 kB)
running /env/bin/init...

2016-10-19 9:53 GMT+02:00 Juergen Borleis <jbe at pengutronix.de>:
> Hi Javier,
>
> On Tuesday 18 October 2016 18:56:03 Javier Fileiv wrote:
>> Trying to autoboot from nand, I set my /env/config file like that (and
>> after that a "saveenv"). Although it doesn't work automaGically! :)
>
> Can you also send the output of barebox from power on up to the point it falls
> into the prompt?
>
> Cheers,
> Juergen
>
> --
> Pengutronix e.K.                              | Juergen Borleis             |
> Industrial Linux Solutions                    | http://www.pengutronix.de/  |