[PATCH 06/18] clk-imx6: Call clk_enable on mmdc_ch0_axi_podf

[Andrey Smirnov]

Call clk_enable on mmdc_ch0_axi_podf in order to properly increase
reference counters for all of the nodes in this particular clock
path. Otherwise it becomes possible for peripherals, located on other
branches stemming from "periph", to shut down the whole clock tree (up
to "pll2_bus") when they try to manage their own local clocks.

Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
 arch/arm/mach-imx/clk-imx6.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-imx/clk-imx6.c b/arch/arm/mach-imx/clk-imx6.c
index 597e502..da8033e 100644
--- a/arch/arm/mach-imx/clk-imx6.c
+++ b/arch/arm/mach-imx/clk-imx6.c
@@ -501,6 +501,7 @@ static int imx6_ccm_probe(struct device_d *dev)
 	clk_data.clk_num = IMX6QDL_CLK_END;
 	of_clk_add_provider(dev->device_node, of_clk_src_onecell_get, &clk_data);
 
+	clk_enable(clks[IMX6QDL_CLK_MMDC_CH0_AXI_PODF]);
 	clk_enable(clks[IMX6QDL_CLK_PLL6_ENET]);
 	clk_enable(clks[IMX6QDL_CLK_SATA_REF_100M]);
 	clk_enable(clks[IMX6QDL_CLK_ENFC_PODF]);
-- 
2.5.0