[PATCH 3/4] fastboot: Fix usage of ubiformat for UBI image transfers

[Markus Pargmann]

Currently all fastboot flash commands with UBI images are handled by a
final call to 'ubiformat'. This only makes sense for flash commands
where the target file is a mtd device. If we just want to transfer a UBI
image we would expect a simple copy to the correct location.

This patch checks if the destination file is a MTD device by opening it
and calling an ioctl MEMGETINFO. Only for MTD devices, ubiformat is
called.

Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
---
 drivers/usb/gadget/f_fastboot.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index bf28f7c22aaa..192c0d6eb7f4 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -686,7 +686,21 @@ static void cb_flash(struct usb_ep *ep, struct usb_request *req, const char *cmd
 	}
 
 	if (filetype == filetype_ubi) {
-		char *cmd = asprintf("ubiformat -y -f %s %s", FASTBOOT_TMPFILE, filename);
+		char *cmd;
+		int fd;
+		struct mtd_info_user meminfo;
+
+		fd = open(filename, O_RDONLY);
+		if (!fd)
+			goto copy;
+
+		ret = ioctl(fd, MEMGETINFO, &meminfo);
+		close(fd);
+		/* Not a MTD device, ubiformat is not a valid operation */
+		if (ret)
+			goto copy;
+
+		cmd = asprintf("ubiformat -y -f %s %s", FASTBOOT_TMPFILE, filename);
 
 		fastboot_tx_print(f_fb, "INFOThis is an UBI image...");
 
@@ -702,6 +716,7 @@ static void cb_flash(struct usb_ep *ep, struct usb_request *req, const char *cmd
 		goto out;
 	}
 
+copy:
 	ret = copy_file(FASTBOOT_TMPFILE, filename, 1);
 	if (ret) {
 		fastboot_tx_print(f_fb, "FAILwrite partition: %s", strerror(-ret));
-- 
2.7.0.rc3