[PATCH] net: phy: micrel: KSZ9081/KSZ8091: Disable broadcast mode

[Teresa Remmet]

KSZ9081 only supports two phy ids 0x0 and 0x3. 0x0 is also
used as broadcast address. Disable broadcast, so that id 0x0
can be used as unique address on a shared bus.

Signed-off-by: Teresa Remmet <t.remmet at phytec.de>
---
 drivers/net/phy/micrel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index e8a566d..9a30cb7 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -357,7 +357,7 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.drv.name	= "Micrel KSZ8081/91",
 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
-	.config_init	= kszphy_config_init,
+	.config_init	= ksz8021_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 }, {
-- 
1.9.1