[PATCH 5/5] usb: fastboot: drop CONFIG_COMMAND_SUPPORT dependency

[Sascha Hauer]

fastboot can run without command support. In this case we cannot
execute oem commands.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/usb/gadget/Kconfig      | 1 +
 drivers/usb/gadget/f_fastboot.c | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 13a3e70..fefe2dd 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -45,6 +45,7 @@ config USB_GADGET_FASTBOOT
 	bool
 	select BANNER
 	depends on COMMAND_SUPPORT
+	select BOSCH_COMMON
 	prompt "Android Fastboot support"
 
 endif
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index 1f56975..e83fa30 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -867,6 +867,11 @@ static void cb_oem_exec(struct usb_ep *ep, struct usb_request *req, const char *
 	struct f_fastboot *f_fb = req->context;
 	int ret;
 
+	if (!IS_ENABLED(CONFIG_COMMAND)) {
+		fastboot_tx_print(f_fb, "FAILno command support available");
+		return;
+	}
+
 	ret = run_command(cmd);
 	if (ret < 0)
 		fastboot_tx_print(f_fb, "FAIL%s", strerror(-ret));
-- 
2.8.0.rc3