[PATCH] ARM: dts: imx6qdl-sabresd: Fix barebox-environment location

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

After doing a 'saveenv' command, it is no longer possible to boot.

The reason is that the 'barebox-environment' overwrites the 
barebox binary.

Fix this problem by placing the environment into a proper SD card
location, such as 0xc0000.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 arch/arm/dts/imx6qdl-sabresd.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi
index 32318cf..29dc4d4 100644
--- a/arch/arm/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -34,8 +34,8 @@
 		reg = <0x0 0x80000>;
 	};
 
-	environment_usdhc3: partition at 1 {
+	environment_usdhc3: partition at c0000 {
 		label = "barebox-environment";
-		reg = <0x80000 0x80000>;
+		reg = <0xc0000 0x80000>;
 	};
 };
-- 
1.9.1