[PATCH] pinctrl: mxs: add raw value from device tree to debug output

[Uwe Kleine-König]

Not sure this is of general interest, but it helped me matching pin
configs from a static table to device tree entries.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pinctrl/pinctrl-mxs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c
index ec0aaec67f06..fa1176fe1bd6 100644
--- a/drivers/pinctrl/pinctrl-mxs.c
+++ b/drivers/pinctrl/pinctrl-mxs.c
@@ -89,8 +89,8 @@ static int mxs_pinctrl_set_state(struct pinctrl_device *pdev, struct device_node
 		writel(0x3 << shift, reg + STMP_OFFSET_REG_CLR);
 		writel(muxsel << shift, reg + STMP_OFFSET_REG_SET);
 
-		dev_dbg(iomux->pinctrl.dev, "pin %d, mux %d, ma: %d, vol: %d, pull: %d\n",
-				pinid, muxsel, ma, vol, pull);
+		dev_dbg(iomux->pinctrl.dev, "(val: 0x%x) pin %d, mux %d, ma: %d, vol: %d, pull: %d\n",
+				val, pinid, muxsel, ma, vol, pull);
 
 		/* drive */
 		reg = iomux->base + 0x300;
-- 
2.7.0