[PATCH 6/6] MIPS: tplink-mr3020_defconfig: enable gpio & leds

[Antony Pavlov]

Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
 arch/mips/configs/tplink-mr3020_defconfig | 38 ++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/arch/mips/configs/tplink-mr3020_defconfig b/arch/mips/configs/tplink-mr3020_defconfig
index 9f81ce3..b675993 100644
--- a/arch/mips/configs/tplink-mr3020_defconfig
+++ b/arch/mips/configs/tplink-mr3020_defconfig
@@ -1,34 +1,40 @@
 CONFIG_BUILTIN_DTB=y
 CONFIG_BUILTIN_DTB_NAME="tplink-mr3020"
 CONFIG_MACH_MIPS_ATH79=y
-CONFIG_LONGHELP=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_LET=y
-CONFIG_CMD_GLOBAL=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_BOOTM is not set
+CONFIG_CMD_GO=y
 CONFIG_CMD_LOADB=y
 CONFIG_CMD_LOADY=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MM=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GLOBAL=y
 CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_CLK=y
 CONFIG_CMD_FLASH=y
-# CONFIG_CMD_BOOTM is not set
-CONFIG_CMD_RESET=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
 CONFIG_CMD_SPI=y
-CONFIG_CMD_CLK=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OFTREE=y
 CONFIG_OFDEVICE=y
 CONFIG_DRIVER_SERIAL_AR933X=y
 CONFIG_DRIVER_SPI_ATH79=y
 CONFIG_MTD=y
 # CONFIG_MTD_OOB_DEVICE is not set
 CONFIG_MTD_M25P80=y
-CONFIG_MD5=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+CONFIG_LED_TRIGGERS=y
 CONFIG_DIGEST_SHA224_GENERIC=y
 CONFIG_DIGEST_SHA256_GENERIC=y
-- 
2.5.0