[PATCH 00/17] Armada 370/XP NAND driver

Robert Jarzmik robert.jarzmik at free.fr
Tue Oct 13 03:38:51 PDT 2015


Sascha Hauer <s.hauer at pengutronix.de> writes:

> In your temporary patch you have:
>
>> @@ -67,6 +71,9 @@ static int zylonite_devices_init(void)
>>  			   &smsc91x_pdata);
>>  	add_generic_device("mrvl_nand", DEVICE_ID_DYNAMIC, NULL,
>>  			   0x43100000, 0x1000, IORESOURCE_MEM, &nand_pdata);
>> +	clk = clk_get_sys("nand", NULL);
>> +	if (!IS_ERR(clk))
>> +		clkdev_add_physbase(clk, 0x43100000, NULL);
>
> Could it be that you register the clk lookup after the nand driver is probed? This
> hunk should be moved before the nand device registration.
That's what I had thought, but changing the order gave me a panic, so I didn't
push forward.

This is what I had, decoded in [1].

Cheers.

--
Robert

[1] My backtrace with the inversion :

barebox at Zylonite:/ bootm /mnt/tftp/barebox.bin
bootm /mnt/tftp/barebox.bin
netconsole: netconsole initialized with 255.255.255.255:6662
eth0: 100Mbps full duplex link detected
DHCP client bound to address 192.168.1.232

Loading ARM barebox image '/mnt/tftp/barebox.bin'
commandline: ram=64M console=ttyS0,115200   mtdparts=pxa3xx_nand-0:128k at 0(TIMH)ro,128k at 128k(OBMI)ro,768k at 256k(barebox),256k at 1024k(barebox-env),12M at 1280k(kernel),38016k at 13568k(root)
arch_number: 1233
netconsole: port not set
netconsole: registered as netconsole-1
smc91c111 smc91c1110: chip is revision= 9, version= 2
mdio_bus: miibus0: probed
eth0: got preset MAC address: 00:0e:0c:a7:26:f7
zylonite_devices_init(): clk = 83703328
alloc_nand_resource(): clk_get() -> 83703328
unable to handle NULL pointer dereference at address 0x00000004
pc : [<83f15b9c>]    lr : [<83f15b90>]
sp : 83fffed0  ip : 000001b0  fp : 00000000
r10: 00000002  r9 : 83706888  r8 : 83f8c88c
r7 : 00000000  r6 : 00000000  r5 : 83706948  r4 : 00000000
r3 : 83706888  r2 : 43100000  r1 : 83f60783  r0 : 00000000
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
(mrvl_nand_probe+0x1ac/0x650) from device_probe (/drivers/base/driver.c:93)
(device_probe+0x30/0xb8) from match.part.3 (/drivers/base/driver.c:153)
(match.part.3+0x44/0x54) from register_device (/drivers/base/driver.c:192)
(register_device+0x120/0x15c) from add_generic_device (/drivers/base/resource.c:84)
(add_generic_device+0x3c/0x48) from zylonite_devices_init (/arch/arm/boards/zylonite/board.c:78)
(zylonite_devices_init+0x9c/0x108) from start_barebox (/common/startup.c:101)
(start_barebox+0x30/0xe8) from __start (/arch/arm/cpu/start.c:142)
(__start+0x124/0x13c) from 0x8386c290

(unwind_backtrace+0x0/0x90) from panic (/common/misc.c:209)
(panic+0x28/0x38) from do_exception (/arch/arm/cpu/interrupts.c:85)
(do_exception+0x10/0x14) from do_data_abort (/arch/arm/cpu/interrupts.c:139)
(do_data_abort+0x2c/0x38) from do_abort_6 (:?)
### ERROR ### Please RESET the board ###

And a special gift :
rj at belgarion:~/mio_linux/barebox$ addr2line -i -e barebox 0x83f15b9c
/home/rj/mio_linux/barebox/drivers/mtd/nand/nand_mrvl_nfc.c:1172
/home/rj/mio_linux/barebox/drivers/mtd/nand/nand_mrvl_nfc.c:1202



More information about the barebox mailing list