[PATCH 10/17] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths

[Sebastian Hesselbarth]

Newer versions of Marvell PXA3xx NFC also support BCH and therefore
higher ECC strengths than 1. Prepare for different ECC strength by
factoring out ECC init into separate functions by strength. Also,
add a new host variable that indicates BCH ECC.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: Robert Jarzmik <robert.jarzmik at free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>
Cc: barebox at lists.infradead.org
---
 drivers/mtd/nand/nand_mrvl_nfc.c | 36 +++++++++++++++++++++++++++++-------
 1 file changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/nand_mrvl_nfc.c b/drivers/mtd/nand/nand_mrvl_nfc.c
index 676846e546a2..5ff5ed72ff49 100644
--- a/drivers/mtd/nand/nand_mrvl_nfc.c
+++ b/drivers/mtd/nand/nand_mrvl_nfc.c
@@ -155,6 +155,7 @@ struct mrvl_nand_host {
 	int			num_cs;		/* avaiable CS signals */
 	int			cs;		/* selected chip 0/1 */
 	int			use_ecc;	/* use HW ECC ? */
+	int			ecc_bch;	/* HW ECC is BCH */
 	int			use_spare;	/* use spare ? */
 	int			flash_bbt;
 
@@ -823,32 +824,53 @@ static void mrvl_nand_config_flash(struct mrvl_nand_host *host)
 	host->reg_ndcr = ndcr;
 }
 
-static int pxa_ecc_init(struct mrvl_nand_host *host,
-			struct nand_ecc_ctrl *ecc,
-			int strength, int ecc_stepsize, int page_size)
+static int pxa_ecc_strength1(struct mrvl_nand_host *host,
+		struct nand_ecc_ctrl *ecc, int ecc_stepsize, int page_size)
 {
-	if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
+	if (ecc_stepsize == 512 && page_size == 2048) {
 		host->chunk_size = 2048;
 		host->spare_size = 40;
 		host->ecc_size = 24;
+		host->ecc_bch = 0;
 		ecc->mode = NAND_ECC_HW;
 		ecc->size = 512;
 		ecc->strength = 1;
 		ecc->layout = &ecc_layout_2KB_hwecc;
+		return 0;
+	}
 
-	} else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
+	if (ecc_stepsize == 512 && page_size == 512) {
 		host->chunk_size = 512;
 		host->spare_size = 8;
 		host->ecc_size = 8;
+		host->ecc_bch = 0;
 		ecc->mode = NAND_ECC_HW;
 		ecc->size = 512;
 		ecc->layout = &ecc_layout_512B_hwecc;
 		ecc->strength = 1;
-	} else {
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int pxa_ecc_init(struct mrvl_nand_host *host,
+			struct nand_ecc_ctrl *ecc,
+			int strength, int ecc_stepsize, int page_size)
+{
+	int ret = -ENODEV;
+
+	switch (strength) {
+	case 1:
+		ret = pxa_ecc_strength1(host, ecc, ecc_stepsize, page_size);
+		break;
+	}
+
+	if (ret) {
 		dev_err(host->dev,
 			"ECC strength %d at page size %d is not supported\n",
 			strength, page_size);
-		return -ENODEV;
+		return ret;
 	}
 
 	dev_info(host->dev, "ECC strength %d, ECC step size %d\n",
-- 
2.1.0