[PATCH 3/5] Watchdog: add a scope value to the watchdog feature
Sascha Hauer
s.hauer at pengutronix.de
Tue Jun 23 23:51:11 PDT 2015
On Tue, Jun 23, 2015 at 02:58:02PM +0200, Juergen Borleis wrote:
> Sometimes the SoC internal watchdogs are inappropriate to restart the
> machine in a reliable manner. This change should help to handle more than
> one watchdog unit by adding a scope parameter. The framework always
> prefers the watchdog with the widest scope. For example a watchdog
> which is able to restart the whole machine (SoC + external devices) gets
> precedence over a watchdog which can restart the SoC only.
>
> Signed-off-by: Juergen Borleis <jbe at pengutronix.de>
> ---
> Documentation/user/user-manual.rst | 1 +
> Documentation/user/watchdog.rst | 74 ++++++++++++++++++++++++++++++++++++++
> common/restart.c | 6 ++++
> drivers/watchdog/im28wd.c | 1 +
> drivers/watchdog/imxwd.c | 1 +
> drivers/watchdog/wd_core.c | 24 +++++++++++--
> include/watchdog.h | 3 ++
> 7 files changed, 108 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/user/watchdog.rst
>
> diff --git a/Documentation/user/user-manual.rst b/Documentation/user/user-manual.rst
> index 0d6daee..8a32469 100644
> --- a/Documentation/user/user-manual.rst
> +++ b/Documentation/user/user-manual.rst
> @@ -30,6 +30,7 @@ Contents:
> system-setup
> reset-reason
> system-reset
> + watchdog
>
> * :ref:`search`
> * :ref:`genindex`
> diff --git a/Documentation/user/watchdog.rst b/Documentation/user/watchdog.rst
> new file mode 100644
> index 0000000..d8e6e76
> --- /dev/null
> +++ b/Documentation/user/watchdog.rst
> @@ -0,0 +1,74 @@
> +.. _watchdog_usage:
> +
> +Using a watchdog
> +----------------
> +
> +Watchdogs are commonly used to prevent bad software from hanging the whole
> +system for ever. Sometimes a simple approach can help to make a system work
> +if hanging failures are happen very seldom: just restart the system and do
> +everything again in the same way as it was done when the system starts the
> +last time.
> +
> +But using a watchdog should always be the 'last resort' to keep a machine
> +working. The focus should still be on finding and fixing the bug ;)
> +
> +A more complex way to use a watchdog in a real-word example is when the state
> +frameworks comes into play. Then the watchdog's task isn't only to keep the
> +machine working. It also monitors the whole health of the machine including
> +hardware and software. Especially something like a firmware update can go
> +wrong: a wrong firmware was programmed (wrong release or for a different machine),
> +programming was incomplete due to a user intervention or power fail and so on.
> +
> +In this case the watchdog does not just restart the system if the software hangs,
> +it also provides 'additional' information about the firmware by this restart.
> +The barebox's state framework is now able to run some kind of state machine to handle
> +firmware updates in a correct manner: trying the new firmware once and if it fails falling
> +back to the previous firmware (if available) for example.
> +
> +Refer the :ref:`reset_reason` how to detect the reason why the bootloader runs.
> +This information can be used by the barebox's state framework.
> +
> +.. _watchdog_restart_pitfalls:
> +
> +Watchdog Pitfalls
> +~~~~~~~~~~~~~~~~~
> +
> +If a watchdog triggers a machine restart it suffers from the same issues like
> +a regular user triggered system machine restart. Refer :ref:`system_reset_pitfalls`
> +for further details.
> +So keep this in mind when you select an available watchdog on your machine for
> +this task. And if you are a hardware designer keep this in mind even more, and
> +provide a reliable restart source for the software developers and to keep their
> +headache low.
> +
> +Watchdogs from the developers point of view
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Watchdogs gets registered in barebox with a scope. When you register your own
> +watchdog driver, check its hardware scope carefully and use one of the
> +definitions from the file ``include/restart.h``.
> +
> +The list of defined scopes (defined in file ``include/restart.h``):
> +
> +* ``FEATURE_SCOPE_UNKNOWN``: completely useless watchdog, maybe a last resort..
> +* ``FEATURE_SCOPE_CPU``: this watchdog is able to restart the core CPU only.
> + Regarding to the issues in :ref:`system_reset_pitfalls` this kind of watchdog
> + seems more or less useless.
> +* ``FEATURE_SCOPE_SOC``: this watchdog is able to restart the whole SoC. Regarding
> + to the issues in :ref:`system_reset_pitfalls` this scope is more reliable, but
> + depends on the machine and its hardware design if is able to bring the machine
> + back into life under every circumstance.
> +* ``FEATURE_SCOPE_MACHINE``: it is able to restart the whole machine and does
> + the same like a real ``POR`` does. Best scope and always reliable.
> +
> +The selected scope is very important because barebox will always use
> +the watchdog with the best available scope.
> +
> +But that is true only for watchdogs used in barebox and as long barebox is
> +running.
> +
> +If an operating system runs later on, it is the task of this OS to use a watchdog
> +with a correct scope. Otherwise it suffers from the :ref:`system_reset_pitfalls`
> +as well. This is even more important if the state framework is used. That means
> +barebox and the operating system must use the same watchdog in order to check
> +and change the states correctly.
> diff --git a/common/restart.c b/common/restart.c
> index 67797e4..c0c4861 100644
> --- a/common/restart.c
> +++ b/common/restart.c
> @@ -119,6 +119,12 @@ int restart_remove_handler(void (*func)(struct device_d*), struct device_d *dev)
> }
> EXPORT_SYMBOL(restart_remove_handler);
>
> +void watchdog_update_global_info(int *scope)
> +{
> + globalvar_add_simple_enum("system.wd.scope", scope,
> + scope_names, ARRAY_SIZE(scope_names));
> +}
> +
> static int reset_feature_init(void)
> {
> reset_source_update_global_info();
> diff --git a/drivers/watchdog/im28wd.c b/drivers/watchdog/im28wd.c
> index c824a25..918d37a 100644
> --- a/drivers/watchdog/im28wd.c
> +++ b/drivers/watchdog/im28wd.c
> @@ -197,6 +197,7 @@ static int imx28_wd_probe(struct device_d *dev)
> if (IS_ERR(priv->regs))
> return PTR_ERR(priv->regs);
> priv->wd.set_timeout = imx28_watchdog_set_timeout;
> + priv->wd.scope = FEATURE_SCOPE_SOC;
>
> if (!(readl(priv->regs + MXS_RTC_STAT) & MXS_RTC_STAT_WD_PRESENT)) {
> rc = -ENODEV;
> diff --git a/drivers/watchdog/imxwd.c b/drivers/watchdog/imxwd.c
> index 3cbae09..60772b1 100644
> --- a/drivers/watchdog/imxwd.c
> +++ b/drivers/watchdog/imxwd.c
> @@ -185,6 +185,7 @@ static int imx_wd_probe(struct device_d *dev)
> }
> priv->ops = ops;
> priv->wd.set_timeout = imx_watchdog_set_timeout;
> + priv->wd.scope = FEATURE_SCOPE_SOC;
> priv->dev = dev;
>
> if (IS_ENABLED(CONFIG_WATCHDOG_IMX)) {
> diff --git a/drivers/watchdog/wd_core.c b/drivers/watchdog/wd_core.c
> index 3d0cfc6..6386cf3 100644
> --- a/drivers/watchdog/wd_core.c
> +++ b/drivers/watchdog/wd_core.c
> @@ -13,22 +13,32 @@
> */
>
> #include <common.h>
> +#include <init.h>
> #include <command.h>
> #include <errno.h>
> #include <linux/ctype.h>
> #include <watchdog.h>
> +#include <globalvar.h>
> +#include <restart.h>
>
> /*
> * Note: this simple framework supports one watchdog only.
> */
> static struct watchdog *watchdog;
> +static int watchdog_scope;
> +
> +void watchdog_update_global_info(int*);
>
> int watchdog_register(struct watchdog *wd)
> {
> - if (watchdog != NULL)
> - return -EBUSY;
> + /* ignore a lower or same priority, it isn't a failure */
> + if (wd->scope <= watchdog_scope)
> + return 0;
>
> watchdog = wd;
> + watchdog_scope = (int)wd->scope;
I don't think we have to make this explicit cast from enum to int.
> + watchdog_update_global_info(&watchdog_scope);
Unnecessary.
> +
> return 0;
> }
> EXPORT_SYMBOL(watchdog_register);
> @@ -39,6 +49,9 @@ int watchdog_deregister(struct watchdog *wd)
> return -ENODEV;
>
> watchdog = NULL;
> + watchdog_scope = (int)FEATURE_SCOPE_UNKNOWN;
> + watchdog_update_global_info(&watchdog_scope);
Unnecessary.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list