[PATCH 4/6] Watchdog: add a scope value to the watchdog feature
Juergen Borleis
jbe at pengutronix.de
Mon Jun 22 03:33:22 PDT 2015
Sometimes the SoC internal watchdogs are inappropriate to restart the
machine in a reliable manner. This change should help to handle more than
one watchdog unit by adding a scope parameter. The framework always
prefers the watchdog with the widest scope. For example a watchdog
which is able to restart the whole machine (SoC + external devices) gets
precedence over a watchdog which can restart the SoC only.
Signed-off-by: Juergen Borleis <jbe at pengutronix.de>
---
Documentation/user/user-manual.rst | 1 +
Documentation/user/watchdog.rst | 74 ++++++++++++++++++++++++++++++++++++++
drivers/watchdog/im28wd.c | 2 +-
drivers/watchdog/imxwd.c | 2 +-
drivers/watchdog/wd_core.c | 45 +++++++++++++++++++++--
include/watchdog.h | 6 ++--
6 files changed, 123 insertions(+), 7 deletions(-)
create mode 100644 Documentation/user/watchdog.rst
diff --git a/Documentation/user/user-manual.rst b/Documentation/user/user-manual.rst
index 0d6daee..8a32469 100644
--- a/Documentation/user/user-manual.rst
+++ b/Documentation/user/user-manual.rst
@@ -30,6 +30,7 @@ Contents:
system-setup
reset-reason
system-reset
+ watchdog
* :ref:`search`
* :ref:`genindex`
diff --git a/Documentation/user/watchdog.rst b/Documentation/user/watchdog.rst
new file mode 100644
index 0000000..b98d11c
--- /dev/null
+++ b/Documentation/user/watchdog.rst
@@ -0,0 +1,74 @@
+.. _watchdog_usage:
+
+Using a watchdog
+----------------
+
+Watchdogs are commonly used to prevent bad software from hanging the whole
+system for ever. Sometimes a simple approach can help to make a system work
+if hanging failures are happen very seldom: just restart the system and do
+everything again in the same way as it was done when the system starts the
+last time.
+
+But using a watchdog should always be the 'last resort' to keep a machine
+working. The focus should still be on finding and fixing the bug ;)
+
+A more complex way to use a watchdog in a real-word example is when the state
+frameworks comes into play. Then the watchdog's task isn't only to keep the
+machine working. It also monitors the whole health of the machine including
+hardware and software. Especially something like a firmware update can go
+wrong: a wrong firmware was programmed (wrong release or for a different machine),
+programming was incomplete due to a user intervention or power fail and so on.
+
+In this case the watchdog does not just restart the system if the software hangs,
+it also provides 'additional' information about the firmware by this restart.
+The barebox's state framework is now able to run some kind of state machine to handle
+firmware updates in a correct manner: trying the new firmware once and if it fails falling
+back to the previous firmware (if available) for example.
+
+Refer the :ref:`reset_reason` how to detect the reason why the bootloader runs.
+This information can be used by the barebox's state framework.
+
+.. _watchdog_restart_pitfalls:
+
+Watchdog Pitfalls
+~~~~~~~~~~~~~~~~~
+
+If a watchdog triggers a machine restart it suffers from the same issues like
+a regular user triggered system machine restart. Refer :ref:`system_reset_pitfalls`
+for further details.
+So keep this in mind when you select an available watchdog on your machine for
+this task. And if you are a hardware designer keep this in mind even more, and
+provide a reliable restart source for the software developers and to keep their
+headache low.
+
+Watchdogs from the developers point of view
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Watchdogs gets registered in barebox with a scope. When you register your own
+watchdog driver, check its hardware scope carefully and use one of the
+definitions from the file ``include/fscope.h``.
+
+The list of defined scopes (defined in file ``include/fscope.h``):
+
+* ``FEATURE_SCOPE_UNKNOWN``: completely useless watchdog, maybe a last resort..
+* ``FEATURE_SCOPE_CPU``: this watchdog is able to restart the core CPU only.
+ Regarding to the issues in :ref:`system_reset_pitfalls` this kind of watchdog
+ seems more or less useless.
+* ``FEATURE_SCOPE_SOC``: this watchdog is able to restart the whole SoC. Regarding
+ to the issues in :ref:`system_reset_pitfalls` this scope is more reliable, but
+ depends on the machine and its hardware design if is able to bring the machine
+ back into life under every circumstance.
+* ``FEATURE_SCOPE_MACHINE``: it is able to restart the whole machine and does
+ the same like a real ``POR`` does. Best scope and always reliable.
+
+The selected scope is very important because barebox will always use
+the watchdog with the best available scope.
+
+But that is true only for watchdogs used in barebox and as long barebox is
+running.
+
+If an operating system runs later on, it is the task of this OS to use a watchdog
+with a correct scope. Otherwise it suffers from the :ref:`system_reset_pitfalls`
+as well. This is even more important if the state framework is used. That means
+barebox and the operating system must use the same watchdog in order to check
+and change the states correctly.
diff --git a/drivers/watchdog/im28wd.c b/drivers/watchdog/im28wd.c
index 5781387..d885e68 100644
--- a/drivers/watchdog/im28wd.c
+++ b/drivers/watchdog/im28wd.c
@@ -206,7 +206,7 @@ static int imx28_wd_probe(struct device_d *dev)
/* disable the debug feature to ensure a working WD */
writel(0x00000000, priv->regs + MXS_RTC_DEBUG);
- rc = watchdog_register(&priv->wd);
+ rc = watchdog_register(&priv->wd, FEATURE_SCOPE_SOC);
if (rc != 0)
goto on_error;
diff --git a/drivers/watchdog/imxwd.c b/drivers/watchdog/imxwd.c
index cdf3d40..f9ec57c 100644
--- a/drivers/watchdog/imxwd.c
+++ b/drivers/watchdog/imxwd.c
@@ -191,7 +191,7 @@ static int imx_wd_probe(struct device_d *dev)
priv->dev = dev;
if (IS_ENABLED(CONFIG_WATCHDOG_IMX)) {
- ret = watchdog_register(&priv->wd);
+ ret = watchdog_register(&priv->wd, FEATURE_SCOPE_SOC);
if (ret)
goto on_error;
}
diff --git a/drivers/watchdog/wd_core.c b/drivers/watchdog/wd_core.c
index 3d0cfc6..79eede3 100644
--- a/drivers/watchdog/wd_core.c
+++ b/drivers/watchdog/wd_core.c
@@ -13,22 +13,50 @@
*/
#include <common.h>
+#include <init.h>
#include <command.h>
#include <errno.h>
#include <linux/ctype.h>
#include <watchdog.h>
+#include <globalvar.h>
/*
* Note: this simple framework supports one watchdog only.
*/
static struct watchdog *watchdog;
+static unsigned watchdog_scope;
-int watchdog_register(struct watchdog *wd)
+static void watchdog_update_global_info(void)
{
- if (watchdog != NULL)
- return -EBUSY;
+ const char *scope;
+
+ switch (watchdog_scope) {
+ case FEATURE_SCOPE_CPU:
+ scope = NAME_FEATURE_SCOPE_CPU;
+ break;
+ case FEATURE_SCOPE_SOC:
+ scope = NAME_FEATURE_SCOPE_SOC;
+ break;
+ case FEATURE_SCOPE_MACHINE:
+ scope = NAME_FEATURE_SCOPE_MACHINE;
+ break;
+ default:
+ scope = NAME_FEATURE_SCOPE_UNKNOWN;
+ break;
+ }
+ globalvar_set_match("system.wd.scope", scope);
+}
+
+int watchdog_register(struct watchdog *wd, enum f_scope scope)
+{
+ /* ignore a lower or same priority, it isn't a failure */
+ if (scope <= watchdog_scope)
+ return 0;
watchdog = wd;
+ watchdog_scope = scope;
+ watchdog_update_global_info();
+
return 0;
}
EXPORT_SYMBOL(watchdog_register);
@@ -39,6 +67,9 @@ int watchdog_deregister(struct watchdog *wd)
return -ENODEV;
watchdog = NULL;
+ watchdog_scope = FEATURE_SCOPE_UNKNOWN;
+ watchdog_update_global_info();
+
return 0;
}
EXPORT_SYMBOL(watchdog_deregister);
@@ -55,3 +86,11 @@ int watchdog_set_timeout(unsigned timeout)
return watchdog->set_timeout(watchdog, timeout);
}
EXPORT_SYMBOL(watchdog_set_timeout);
+
+static int watchdog_capability_init(void)
+{
+ globalvar_add_simple("system.wd.scope", NAME_FEATURE_SCOPE_UNKNOWN);
+
+ return 0;
+}
+coredevice_initcall(watchdog_capability_init);
diff --git a/include/watchdog.h b/include/watchdog.h
index 7e37b7c..9822166 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -13,16 +13,18 @@
#ifndef INCLUDE_WATCHDOG_H
# define INCLUDE_WATCHDOG_H
+#include <fscope.h>
+
struct watchdog {
int (*set_timeout)(struct watchdog *, unsigned);
};
#ifdef CONFIG_WATCHDOG
-int watchdog_register(struct watchdog *);
+int watchdog_register(struct watchdog *, enum f_scope);
int watchdog_deregister(struct watchdog *);
int watchdog_set_timeout(unsigned);
#else
-static inline int watchdog_register(struct watchdog *w)
+static inline int watchdog_register(struct watchdog *w, enum f_scope s)
{
return 0;
}
--
2.1.4
More information about the barebox
mailing list