[PATCH] libdt: fix detection of eeprom devicepath

[Marc Kleine-Budde]

On 06/19/2015 09:52 AM, Marc Kleine-Budde wrote:
>> At the end of of_get_devicepath there is a check for eeproms, but then
>> of_parse_partition looks for a reg property which is in a casse of a i2c
>> eeprom is the i2c address. This results in a wrong offset.
> 
> doh!
> 
>> With this patch a i2c eeprom backend works. It's not tested with a mtd device
>> or a eeprom with a partition layout.
> 
> AFAIK on Linux partition layouts are not supported on eeprom devices, as
> they are not handled by the mtd layer. I'll apply this patch and test on
> my standard device, which uses a mtd device.

applied to master.

Works here with the NAND-partition backend. However udev from
systemd-220 fails to find NAND-partition while systemd-219 works, no
matter if your patch is applied or not. Which systemd/udev version are
you using?

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 455 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20150621/6028f3b1/attachment.sig>