[PATCH 01/15] ARM: MXS: Fix vddd brownout setting

[Sascha Hauer]

The brownout setting can be at maximum 7*25mV below the voltage
setting of the regulator. Set it to the minimum Voltage which is
1325mV.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/mach-mxs/power-init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c
index 977c6e4..bc3d659 100644
--- a/arch/arm/mach-mxs/power-init.c
+++ b/arch/arm/mach-mxs/power-init.c
@@ -1177,7 +1177,7 @@ static void __mx23_power_init(int has_battery)
 	mxs_enable_output_rail_protection();
 
 	mxs_power_set_vddx(&mx23_vddio_cfg, 3300, 3150);
-	mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
+	mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1325);
 	mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700);
 
 	writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
@@ -1234,7 +1234,7 @@ static void __mx28_power_init(int has_battery)
 	mxs_enable_output_rail_protection();
 
 	mxs_power_set_vddx(&mx28_vddio_cfg, 3300, 3150);
-	mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
+	mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1325);
 
 	writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
 		POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
-- 
2.1.4