[PATCH] ARM: atmel: sama5d3xek: let emac auto detect phy addr

[Sascha Hauer]

On Thu, Jan 22, 2015 at 03:26:53PM +0800, Bo Shen wrote:
> On the SAMA5D35 the EMAC phy addr is 1 while not 0. So, let
> the EMAC auto detect phy addr, or else hard code to 0, the
> ethernet can not work on SAMA5D35 board.
> 
> Signed-off-by: Bo Shen <voice.shen at atmel.com>

There ere boards with different phy addresses around, so
the current state does not work on all boards anyway. So the worst
thing that can happen with this and the other patch for the gmac is
that now another set of boards does not work. Let's give it a try.
I'm open to reports when now some board stops working.

Applied this and the gmac patch.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |