[PATCH 2/6] raspberry-pi: add leds support

[Sascha Hauer]

On Mon, Jan 19, 2015 at 11:58:10AM +0400, Antony Pavlov wrote:
> On Mon, 19 Jan 2015 08:51:44 +0100
> Sascha Hauer <s.hauer at pengutronix.de> wrote:
> 
> > On Mon, Jan 19, 2015 at 02:08:58AM +0400, Antony Pavlov wrote:
> > > On Tue, 13 Jan 2015 07:33:06 +0100
> > > Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> wrote:
> > > 
> > > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> > > > ---
> > > >  arch/arm/boards/raspberry-pi/rpi.c | 55 ++++++++++++++++++++++++++++++++++++++
> > > >  1 file changed, 55 insertions(+)
> > > > 
> > > > diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
> > > > index ae1e92a..81b485e 100644
> > > > --- a/arch/arm/boards/raspberry-pi/rpi.c
> > > > +++ b/arch/arm/boards/raspberry-pi/rpi.c
> > > ...
> > > > @@ -160,6 +205,15 @@ unknown_rev:
> > > >  	barebox_set_model("RaspberryPi (BCM2835/ARM1176JZF-S)");
> > > >  }
> > > >  
> > > > +static void rpi_model_init(void)
> > > > +{
> > > > +	if (!models[rpi_board_rev].init)
> > > > +		return;
> > > 
> > > Houston, we have a problem here.
> > > Please see current arch/arm/boards/raspberry-pi/rpi.c:
> > > 
> > > /* See comments in mbox.h for data source */
> > > static const struct {
> > > 	const char *name;
> > > 	bool has_onboard_eth;
> > > 	void (*init)(void);
> > > } models[] = {
> > > 	RPI_MODEL(0, "Unknown model", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_I2C0_2, "Model B (no P5)", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_I2C0_3, "Model B (no P5)", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_I2C1_4, "Model B", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_I2C1_5, "Model B", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_I2C1_6, "Model B", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_A_7, "Model A", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_A_8, "Model A", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_A_9, "Model A", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_REV2_d, "Model B rev2", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_REV2_e, "Model B rev2", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_REV2_f, "Model B rev2", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_B_PLUS, "Model B+", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_CM, "Compute Module", NULL),
> > > 	RPI_MODEL(BCM2835_BOARD_REV_A_PLUS, "Model A+", NULL),
> > > };
> > > 
> > > All inits are NULLs!
> > > 
> > > Have we any chance to run rpi_add_led()?
> > 
> > Hm, no, this is never called. Maybe rpi_model_init() should look like
> > this instead?
> > 
> > static void rpi_model_init(void)
> > {
> > 	if (!models[rpi_board_rev].init)
> > 		models[rpi_board_rev].init();
> 
> 
> Do you really want to dereference NULL pointer?

Nah, drop the '!' of course.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |