[PATCH RFT 18/24] net: rtl8169: convert to streaming DMA ops
Lucas Stach
dev at lynxeye.de
Thu Feb 12 13:39:54 PST 2015
Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
drivers/net/Kconfig | 1 +
drivers/net/rtl8169.c | 30 +++++++++++++-----------------
2 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index adb7008..42ffa65 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -167,6 +167,7 @@ config DRIVER_NET_RTL8139
config DRIVER_NET_RTL8169
bool "RealTek RTL-8169 PCI Ethernet driver"
depends on PCI
+ depends on HAS_DMA
select PHYLIB
help
This is a driver for the Fast Ethernet PCI network cards based on
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 093a312..ac22512 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -14,7 +14,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <asm/mmu.h>
#include <common.h>
#include <dma.h>
#include <init.h>
@@ -234,8 +233,8 @@ static void rtl8169_init_ring(struct rtl8169_priv *priv)
priv->rx_desc = dma_alloc_coherent(NUM_RX_DESC *
sizeof(struct bufdesc));
priv->rx_buf = malloc(NUM_RX_DESC * PKT_BUF_SIZE);
- dma_clean_range((unsigned long)priv->rx_buf,
- (unsigned long)priv->rx_buf + NUM_RX_DESC * PKT_BUF_SIZE);
+ dma_sync_single_for_device((unsigned long)priv->rx_buf,
+ NUM_RX_DESC * PKT_BUF_SIZE, DMA_FROM_DEVICE);
memset(priv->tx_desc, 0, NUM_TX_DESC * sizeof(struct bufdesc));
memset(priv->rx_desc, 0, NUM_RX_DESC * sizeof(struct bufdesc));
@@ -366,8 +365,8 @@ static int rtl8169_eth_send(struct eth_device *edev, void *packet,
if (packet_length < ETH_ZLEN)
memset(priv->tx_buf + entry * PKT_BUF_SIZE, 0, ETH_ZLEN);
memcpy(priv->tx_buf + entry * PKT_BUF_SIZE, packet, packet_length);
- dma_flush_range((unsigned long)priv->tx_buf + entry * PKT_BUF_SIZE,
- (unsigned long)priv->tx_buf + (entry + 1) * PKT_BUF_SIZE);
+ dma_sync_single_for_device((unsigned long)priv->tx_buf + entry *
+ PKT_BUF_SIZE, PKT_BUF_SIZE, DMA_TO_DEVICE);
priv->tx_desc[entry].buf_Haddr = 0;
priv->tx_desc[entry].buf_addr =
@@ -388,6 +387,9 @@ static int rtl8169_eth_send(struct eth_device *edev, void *packet,
while (priv->tx_desc[entry].status & BD_STAT_OWN)
;
+ dma_sync_single_for_cpu((unsigned long)priv->tx_buf + entry *
+ PKT_BUF_SIZE, PKT_BUF_SIZE, DMA_TO_DEVICE);
+
priv->cur_tx++;
return 0;
@@ -405,22 +407,16 @@ static int rtl8169_eth_rx(struct eth_device *edev)
if (!(priv->rx_desc[entry].status & BD_STAT_RX_RES)) {
pkt_size = (priv->rx_desc[entry].status & 0x1fff) - 4;
- dma_inv_range((unsigned long)priv->rx_buf
- + entry * PKT_BUF_SIZE,
- (unsigned long)priv->rx_buf
- + entry * PKT_BUF_SIZE + pkt_size);
+ dma_sync_single_for_cpu((unsigned long)priv->rx_buf
+ + entry * PKT_BUF_SIZE,
+ pkt_size, DMA_FROM_DEVICE);
net_receive(edev, priv->rx_buf + entry * PKT_BUF_SIZE,
pkt_size);
- /*
- * the buffer is going to be reused by HW, make sure to
- * clean out any potentially modified data
- */
- dma_clean_range((unsigned long)priv->rx_buf
- + entry * PKT_BUF_SIZE,
- (unsigned long)priv->rx_buf
- + entry * PKT_BUF_SIZE + pkt_size);
+ dma_sync_single_for_device((unsigned long)priv->rx_buf
+ + entry * PKT_BUF_SIZE,
+ pkt_size, DMA_FROM_DEVICE);
if (entry == NUM_RX_DESC - 1)
priv->rx_desc[entry].status = BD_STAT_OWN |
--
2.1.0
More information about the barebox
mailing list