[PATCH RFT 08/24] MCI: imx: convert to streaming DMA ops
Lucas Stach
dev at lynxeye.de
Thu Feb 12 13:39:44 PST 2015
Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
drivers/mci/imx-esdhc.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
index 23bdc1f..8b45500 100644
--- a/drivers/mci/imx-esdhc.c
+++ b/drivers/mci/imx-esdhc.c
@@ -22,6 +22,7 @@
*/
#include <config.h>
#include <common.h>
+#include <dma.h>
#include <driver.h>
#include <init.h>
#include <of.h>
@@ -31,7 +32,6 @@
#include <io.h>
#include <linux/clk.h>
#include <linux/err.h>
-#include <asm/mmu.h>
#include <mach/generic.h>
#include <mach/esdhc.h>
#include <gpio.h>
@@ -211,6 +211,7 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
u32 irqstat;
struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
void __iomem *regs = host->regs;
+ unsigned int num_bytes = 0;
int ret;
esdhc_write32(regs + SDHCI_INT_STATUS, -1);
@@ -225,12 +226,15 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
err = esdhc_setup_data(mci, data);
if(err)
return err;
- if (data->flags & MMC_DATA_WRITE) {
- dma_flush_range((unsigned long)data->src,
- (unsigned long)(data->src + data->blocks * 512));
- } else
- dma_clean_range((unsigned long)data->src,
- (unsigned long)(data->src + data->blocks * 512));
+
+ num_bytes = data->blocks * data->blocksize;
+
+ if (data->flags & MMC_DATA_WRITE)
+ dma_sync_single_for_device((unsigned long)data->src,
+ num_bytes, DMA_TO_DEVICE);
+ else
+ dma_sync_single_for_device((unsigned long)data->dest,
+ num_bytes, DMA_FROM_DEVICE);
}
@@ -313,10 +317,12 @@ esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
} while (!(irqstat & IRQSTAT_TC) &&
(esdhc_read32(regs + SDHCI_PRESENT_STATE) & PRSSTAT_DLA));
- if (data->flags & MMC_DATA_READ) {
- dma_inv_range((unsigned long)data->dest,
- (unsigned long)(data->dest + data->blocks * 512));
- }
+ if (data->flags & MMC_DATA_WRITE)
+ dma_sync_single_for_cpu((unsigned long)data->src,
+ num_bytes, DMA_TO_DEVICE);
+ else
+ dma_sync_single_for_cpu((unsigned long)data->dest,
+ num_bytes, DMA_FROM_DEVICE);
#endif
}
--
2.1.0
More information about the barebox
mailing list