[PATCH 2/2] Switched SAMA5D4EK development board to the newer environment method.

Sascha Hauer s.hauer at pengutronix.de
Thu Feb 12 01:13:54 PST 2015


On Wed, Feb 11, 2015 at 10:39:52AM -0700, Doug Brainard wrote:
> So it looks like the following line in mtdparts-add is causing the
> "nand0." issue:
> 
> addpart -n /dev/${device} "$parts" || exit
> 
> The old environment didn't use the "-n".  Removing the "-n" fixes the
> issue and gives it the same functionality as the old environment did.
> 
> So the question is how should I fix this?  I could remove it in the
> default environment, but that would require all other boards using the
> new environment to update.
> 
> Or, I can add my own env/bin/mtdparts-add script for the board and
> remove the "-n" from there instead which would leave the other
> projects alone.  I'm assuming I should use this option as the fix, but
> I wanted to confirm that with you.

I would rather add a '-n' option to the mtdparts-add script. Anyway, I
just sent a series updating the partition handling. Among other things
I hope that this fixes the naming issue.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list