[PATCH 1/2] docs: remove trailing whitespaces

[Ulrich Ölmann]

Signed-off-by: Ulrich Ölmann <u.oelmann at pengutronix.de>
---
 Documentation/boards/mxs.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
index cfcd4c7..d6406e5 100644
--- a/Documentation/boards/mxs.rst
+++ b/Documentation/boards/mxs.rst
@@ -36,11 +36,11 @@ the internal PMIC and the SDRAM. The second image is usually the
 bootloader itself. In case of barebox the bootstream is composed
 out of the self extracting barebox image (pblx) and the prepare
 stage for setting up the SDRAM.
-    
+
 The bootstream image itself is useful for USB boot, but for booting from
 SD cards or NAND a BCB header has to be prepended to the image. In case
 of SD boot the image has the .mxssd file extension in barebox.
-    
+
 Since the bootstream images are encrypted they are not suitable for
 2nd stage execution. For this purpose the 2nd stage images are generated.
 
@@ -67,7 +67,7 @@ The SD images are suitable for booting from SD cards. SD cards need a special
 partitioning which can be created with the following fdisk sequence (using
 /dev/sdg as example)::
 
-  fdisk /dev/sdg 
+  fdisk /dev/sdg
 
   Welcome to fdisk (util-linux 2.25.1).
   Changes will remain in memory only, until you decide to write them.
@@ -83,17 +83,17 @@ partitioning which can be created with the following fdisk sequence (using
      e   extended (container for logical partitions)
   Select (default p): p
   Partition number (1-4, default 1): 1
-  First sector (2048-7829503, default 2048): 
+  First sector (2048-7829503, default 2048):
   Last sector, +sectors or +size{K,M,G,T,P} (2048-7829503, default 7829503): +1M
 
   Created a new partition 1 of type 'Linux' and of size 1 MiB.
 
-  Command (m for help): t 
+  Command (m for help): t
   Selected partition 1
   Hex code (type L to list all codes): 53
   Changed type of partition 'Linux' to 'OnTrack DM6 Aux3'.
 
-  Command (m for help): 
+  Command (m for help):
 
   Command (m for help): w
 
@@ -101,7 +101,7 @@ After writing the new partition table the image can be written directly to
 the partition::
 
   cat images/barebox-karo-tx28-sd.img > /dev/sdg1
- 
+
 ** NOTE **
 
 The MXS SoCs require a special partition of type 0x53 (OnTrack DM6 Aux)
-- 
2.1.4