[PATCH 2/2] Switched SAMA5D4EK development board to the newer environment method.
Bo Shen
voice.shen at atmel.com
Tue Feb 10 18:34:32 PST 2015
Hi Doug Brainard,
On 02/10/2015 10:28 PM, Doug Brainard wrote:
> ---
> arch/arm/boards/sama5d4ek/env/bin/init_board | 15 --------
> arch/arm/boards/sama5d4ek/env/boot/nand-ubi | 8 +++++
> arch/arm/boards/sama5d4ek/env/config | 42 ----------------------
> arch/arm/boards/sama5d4ek/env/init/mtdparts-nand | 6 ++++
> arch/arm/boards/sama5d4ek/env/init/ps1 | 7 ++++
> arch/arm/boards/sama5d4ek/env/init/splash | 10 ++++++
> arch/arm/boards/sama5d4ek/env/nv/boot.default | 1 +
> arch/arm/boards/sama5d4ek/env/nv/bootargs.base | 1 +
> arch/arm/boards/sama5d4ek/env/nv/hostname | 1 +
> .../boards/sama5d4ek/env/nv/linux.bootargs.console | 1 +
> arch/arm/configs/sama5d4ek_defconfig | 5 +--
> arch/arm/mach-at91/Kconfig | 1 +
> 12 files changed, 39 insertions(+), 59 deletions(-)
> delete mode 100644 arch/arm/boards/sama5d4ek/env/bin/init_board
> create mode 100644 arch/arm/boards/sama5d4ek/env/boot/nand-ubi
> delete mode 100644 arch/arm/boards/sama5d4ek/env/config
> create mode 100644 arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
> create mode 100644 arch/arm/boards/sama5d4ek/env/init/ps1
> create mode 100644 arch/arm/boards/sama5d4ek/env/init/splash
> create mode 100644 arch/arm/boards/sama5d4ek/env/nv/boot.default
> create mode 100644 arch/arm/boards/sama5d4ek/env/nv/bootargs.base
> create mode 100644 arch/arm/boards/sama5d4ek/env/nv/hostname
> create mode 100644 arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
>
> diff --git a/arch/arm/boards/sama5d4ek/env/bin/init_board b/arch/arm/boards/sama5d4ek/env/bin/init_board
> deleted file mode 100644
> index f3d417e..0000000
> --- a/arch/arm/boards/sama5d4ek/env/bin/init_board
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -#!/bin/sh
> -
> -PATH=/env/bin
> -export PATH
> -
> -. /env/config
> -
> -splash=/env/splash.png
> -
> -if [ -f ${splash} -a -e /dev/fb0 ]; then
> - splash -o ${splash}
> - fb0.enable=1
> -fi
> -
> -exit 1
> diff --git a/arch/arm/boards/sama5d4ek/env/boot/nand-ubi b/arch/arm/boards/sama5d4ek/env/boot/nand-ubi
> new file mode 100644
> index 0000000..e8d6bde
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/boot/nand-ubi
> @@ -0,0 +1,8 @@
> +#!/bin/sh
> +
> +global.bootm.image="/dev/nand0.kernel.bb"
> +global.bootm.oftree="/dev/nand0.oftree.bb"
> +
> +bootargs-ip
> +
> +global.linux.bootargs.dyn.root="root=ubi0:nand0.rootfs ubi.mtd=nand0.rootfs rootfstype=ubifs noinitrd"
> diff --git a/arch/arm/boards/sama5d4ek/env/config b/arch/arm/boards/sama5d4ek/env/config
> deleted file mode 100644
> index ee86c07..0000000
> --- a/arch/arm/boards/sama5d4ek/env/config
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -#!/bin/sh
> -
> -# use 'dhcp' to do dhcp in barebox and in kernel
> -# use 'none' if you want to skip kernel ip autoconfiguration
> -ip=dhcp
> -
> -# or set your networking parameters here
> -#eth0.ipaddr=a.b.c.d
> -#eth0.netmask=a.b.c.d
> -#eth0.gateway=a.b.c.d
> -#eth0.serverip=a.b.c.d
> -
> -# can be either 'nfs', 'tftp', 'nor' or 'nand'
> -kernel_loc=nand
> -# can be either 'net', 'nor', 'nand' or 'initrd'
> -rootfs_loc=nand
> -# can be either 'nfs', 'tftp', 'nand' or empty
> -oftree_loc=nand
> -
> -# can be either 'jffs2' or 'ubifs'
> -rootfs_type=ubifs
> -rootfsimage=root.$rootfs_type
> -ubiroot=system
> -
> -# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
> -kernelimage=zImage
> -#kernelimage=uImage
> -#kernelimage=Image
> -#kernelimage=Image.lzo
> -
> -nand_device=atmel_nand
> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)"
> -rootfs_mtdblock_nand=10
> -
> -m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
> -
> -autoboot_timeout=3
> -
> -bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init androidboot.hardware=sama5-pda androidboot.lcd=wvga"
> -
> -# set a fancy prompt (if support is compiled in)
> -PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
> diff --git a/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
> new file mode 100644
> index 0000000..f20a135
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/init/mtdparts-nand
> @@ -0,0 +1,6 @@
> +#!/bin/sh
> +
> +mtdparts="256k(nand0.at91bootstrap),512k(nand0.barebox)ro,256k(nand0.bareboxenv),256k(nand0.bareboxenv2),256k(nand0.spare),512k(nand0.oftree),6M(nand0.kernel),-(nand0.rootfs)"
> +kernelname="atmel_nand"
> +
> +mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
Using this type of partition table make the file system can not mount
successfully.
I remove the "nand0." for partition name, then it is OK. After this
change, it won't keep consistent with the partition table name.
Now boot up the barebox, the partition for nand is: "/dev/barebox",
"/dev/barebox.bb" while not "/dev/nand0.barebox",
/dev/nand0.barebox.bb". I am thinking would it be possible to keep the
consistent?
> diff --git a/arch/arm/boards/sama5d4ek/env/init/ps1 b/arch/arm/boards/sama5d4ek/env/init/ps1
> new file mode 100644
> index 0000000..c0ec1a5
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/init/ps1
> @@ -0,0 +1,7 @@
> +#!/bin/sh
> +
> +if [ ${global.allow_color} = "true" ]; then
> + export PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
> +else
> + export PS1="barebox@\h:\w "
> +fi
> diff --git a/arch/arm/boards/sama5d4ek/env/init/splash b/arch/arm/boards/sama5d4ek/env/init/splash
> new file mode 100644
> index 0000000..190ef31
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/init/splash
> @@ -0,0 +1,10 @@
> +#!/bin/sh
> +
> +splash=/env/splash.png
> +
> +if [ -f ${splash} -a -e /dev/fb0 ]; then
> + splash -o ${splash}
> + fb0.enable=1
> +fi
> +
> +exit 1
> diff --git a/arch/arm/boards/sama5d4ek/env/nv/boot.default b/arch/arm/boards/sama5d4ek/env/nv/boot.default
> new file mode 100644
> index 0000000..d9dfbbc
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/nv/boot.default
> @@ -0,0 +1 @@
> +nand-ubi
> diff --git a/arch/arm/boards/sama5d4ek/env/nv/bootargs.base b/arch/arm/boards/sama5d4ek/env/nv/bootargs.base
> new file mode 100644
> index 0000000..476b1fb
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/nv/bootargs.base
> @@ -0,0 +1 @@
> +console=ttyS0,115200
Till now, I don't know the difference between "bootargs.base" (here
maybe linux.bootargs.base (?)) and "linux.bootargs.console"
> diff --git a/arch/arm/boards/sama5d4ek/env/nv/hostname b/arch/arm/boards/sama5d4ek/env/nv/hostname
> new file mode 100644
> index 0000000..b74056d
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/nv/hostname
> @@ -0,0 +1 @@
> +sama5d4ek
> diff --git a/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console b/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
> new file mode 100644
> index 0000000..476b1fb
> --- /dev/null
> +++ b/arch/arm/boards/sama5d4ek/env/nv/linux.bootargs.console
> @@ -0,0 +1 @@
> +console=ttyS0,115200
> diff --git a/arch/arm/configs/sama5d4ek_defconfig b/arch/arm/configs/sama5d4ek_defconfig
> index bbf254a..f050fe4 100644
> --- a/arch/arm/configs/sama5d4ek_defconfig
> +++ b/arch/arm/configs/sama5d4ek_defconfig
> @@ -9,13 +9,12 @@ CONFIG_MALLOC_SIZE=0xA00000
> CONFIG_EXPERIMENTAL=y
> CONFIG_MALLOC_TLSF=y
> CONFIG_PROMPT="A5D4EK:"
> -CONFIG_GLOB=y
> CONFIG_PROMPT_HUSH_PS2="y"
> CONFIG_HUSH_FANCY_PROMPT=y
> CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> CONFIG_CONSOLE_ACTIVATE_ALL=y
> -CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/sama5d4ek/env"
> CONFIG_DEBUG_INFO=y
> # CONFIG_CMD_ARM_CPUINFO is not set
> @@ -35,6 +34,8 @@ CONFIG_CMD_PARTITION=y
> CONFIG_CMD_EXPORT=y
> CONFIG_CMD_LOADENV=y
> CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_MAGICVAR=y
> +CONFIG_CMD_MAGICVAR_HELP=y
> CONFIG_CMD_SAVEENV=y
> CONFIG_CMD_FILETYPE=y
> CONFIG_CMD_SLEEP=y
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 9ee4f30..7207232 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -489,6 +489,7 @@ choice
>
> config MACH_SAMA5D4EK
> bool "Atmel SAMA5D4 Evaluation Kit"
> + select HAVE_DEFAULT_ENVIRONMENT_NEW
> help
> Select this if you are using Atmel's SAMA5D4-EK Evaluation Kit.
>
>
Best Regards,
Bo Shen
More information about the barebox
mailing list