[PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND.

Bo Shen voice.shen at atmel.com
Tue Feb 10 17:30:18 PST 2015


Hi Doug Brainard,

On 02/10/2015 10:28 PM, Doug Brainard wrote:
> ---
>   arch/arm/boards/sama5d4ek/env/config | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)

As this file will be totally discard in patch 2/2. So, I think no need 
to add this patch. And also it change the default boot setting to 
Android only.

> diff --git a/arch/arm/boards/sama5d4ek/env/config b/arch/arm/boards/sama5d4ek/env/config
> index 1007345..ee86c07 100644
> --- a/arch/arm/boards/sama5d4ek/env/config
> +++ b/arch/arm/boards/sama5d4ek/env/config
> @@ -11,16 +11,16 @@ ip=dhcp
>   #eth0.serverip=a.b.c.d
>
>   # can be either 'nfs', 'tftp', 'nor' or 'nand'
> -kernel_loc=nfs
> +kernel_loc=nand
>   # can be either 'net', 'nor', 'nand' or 'initrd'
> -rootfs_loc=net
> +rootfs_loc=nand
>   # can be either 'nfs', 'tftp', 'nand' or empty
> -oftree_loc=nfs
> +oftree_loc=nand
>
>   # can be either 'jffs2' or 'ubifs'
>   rootfs_type=ubifs
>   rootfsimage=root.$rootfs_type
> -ubiroot=rootfs
> +ubiroot=system
>
>   # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
>   kernelimage=zImage
> @@ -29,14 +29,14 @@ kernelimage=zImage
>   #kernelimage=Image.lzo
>
>   nand_device=atmel_nand
> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
> -rootfs_mtdblock_nand=7
> +nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)"
> +rootfs_mtdblock_nand=10
>
>   m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
>
>   autoboot_timeout=3
>
> -bootargs="console=ttyS0,115200"
> +bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init androidboot.hardware=sama5-pda androidboot.lcd=wvga"
>
>   # set a fancy prompt (if support is compiled in)
>   PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
>

Best Regards,
Bo Shen



More information about the barebox mailing list