saveenv & erase with bad blocks present

[Sascha Hauer]

Hi Marc-Andre,

I found some bugs preventing your OMAP board from working correctly. I
just sent some mtd patches to the list. Could you apply them and retest?

If your board complains about bad blocks that weren't there last time
that could be because of bugs in the Nand driver. In this case you
should do a "nand0.erasebad=1" and erase /dev/nand0.barebox again.

Since your flashed version does not work with the Nand correctly you
should start the fixed version over network. Do you know how to do that?
If you need further help please let me know.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |