[PATCH v2] USB: xHCI: Sync non-coherent DMA buffers
Lucas Stach
l.stach at pengutronix.de
Wed Apr 15 02:10:07 PDT 2015
Am Montag, den 13.04.2015, 16:22 +0200 schrieb Sebastian Hesselbarth:
> When working with non-coherent transfer buffers, we have to sync
> device and cpu for outgoing and incoming buffers. Fix the driver where
> non-coherent buffers are used in device context.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
> ---
> Changelog:
> v1->v2:
> - balance dma_sync_single_foo() calls (Reported by Lucas Stach)
>
> Cc: barebox at lists.infradead.org
> Cc: Lucas Stach <dev at lynxeye.de>
> ---
> drivers/usb/host/xhci-hcd.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
> index c3d623e91f51..a44a1a4dffa5 100644
> --- a/drivers/usb/host/xhci-hcd.c
> +++ b/drivers/usb/host/xhci-hcd.c
> @@ -1024,6 +1024,11 @@ static int xhci_submit_normal(struct usb_device *udev, unsigned long pipe,
> GET_SLOT_STATE(le32_to_cpu(vdev->out_ctx->slot.dev_state)), epi,
> vdev->in_ctx, vdev->out_ctx);
>
> + /* pass ownership of data buffer to device */
> + dma_sync_single_for_device((unsigned long)buffer, length,
> + usb_pipein(pipe) ?
> + DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +
> /* Normal TRB */
> memset(&trb, 0, sizeof(union xhci_trb));
> trb.event_cmd.cmd_trb = cpu_to_le64((dma_addr_t)buffer);
> @@ -1037,6 +1042,11 @@ static int xhci_submit_normal(struct usb_device *udev, unsigned long pipe,
> ret = xhci_wait_for_event(xhci, TRB_TRANSFER, &trb);
> xhci_print_trb(xhci, &trb, "Response Normal");
>
> + /* Regain ownership of data buffer from device */
> + dma_sync_single_for_cpu((unsigned long)buffer, length,
> + usb_pipein(pipe) ?
> + DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +
> switch (ret) {
> case -COMP_SHORT_TX:
> udev->status = 0;
> @@ -1094,6 +1104,11 @@ static int xhci_submit_control(struct usb_device *udev, unsigned long pipe,
> return ret;
> }
>
> + /* Pass ownership of data buffer to device */
> + dma_sync_single_for_device((unsigned long)buffer, length,
> + (req->requesttype & USB_DIR_IN) ?
> + DMA_FROM_DEVICE : DMA_TO_DEVICE);
> +
> /* Setup TRB */
> memset(&trb, 0, sizeof(union xhci_trb));
> trb.generic.field[0] = le16_to_cpu(req->value) << 16 |
> @@ -1141,11 +1156,17 @@ static int xhci_submit_control(struct usb_device *udev, unsigned long pipe,
> if (ret == -COMP_SHORT_TX)
> length -= EVENT_TRB_LEN(trb.event_cmd.status);
> else if (ret < 0)
> - return ret;
> + goto dma_regain;
> }
>
> ret = xhci_wait_for_event(xhci, TRB_TRANSFER, &trb);
> xhci_print_trb(xhci, &trb, "Response Status");
> +
> +dma_regain:
> + /* Regain ownership of data buffer from device */
> + dma_sync_single_for_cpu((unsigned long)buffer, length,
> + (req->requesttype & USB_DIR_IN) ?
> + DMA_FROM_DEVICE : DMA_TO_DEVICE);
> if (ret < 0)
> return ret;
>
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the barebox
mailing list