[PATCH 5/5] Documentation: add Ainol Novo7 Paladin board mini-howto

[Antony Pavlov]

Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
 Documentation/boards/mips/ainol-novo7-paladin.rst | 45 +++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/Documentation/boards/mips/ainol-novo7-paladin.rst b/Documentation/boards/mips/ainol-novo7-paladin.rst
new file mode 100644
index 0000000..becfcd0
--- /dev/null
+++ b/Documentation/boards/mips/ainol-novo7-paladin.rst
@@ -0,0 +1,45 @@
+Ainol Novo7 Paladin
+===================
+
+The tablet has
+
+  * Ingenic JZ4770 SoC;
+  * 512 MiB DDR2 SDRAM;
+  * 8 GiB eMMC Flash Memory;
+  * UART;
+  * touchscreen (800x480);
+  * 1xUSB interface;
+  * buttons.
+
+The tablet uses X-Boot (Ingenic's not interactive U-Boot) as bootloader.
+
+Running barebox
+---------------
+
+  1. Connect to the tablet's UART (see. http://a320.emulate.su/2012/05/14/mini-obzor-planshet-ainol-novo7-paladin-i-processor-jz4770/);
+
+  2. Download and compile ingenic-boot tool for GCW0
+
+.. code-block:: none
+
+    $ git clone https://github.com/gcwnow/ingenic-boot
+    $ cd ingenic-boot
+    ingenic-boot$ make
+..
+
+  3. Push & hold VOL- (GPIO 114 aka D18) while power on or reset (this selects USB boot mode by activating BOOTSEL1 signal);
+
+  3. Upload and start barebox:
+
+.. code-block:: none
+
+    ingenic-boot$ sudo ./tool/down2ram.sh --config=gcw0_v11_ddr2_512mb --bin=${PATH_TO_BAREBOX_DIR}/barebox-flash-image --downto=0xa0800000 --runat=0xa0800000
+..
+
+Links
+-----
+
+  * http://www.ainol-novo.com/ainol-novo-7-paladin-first-android-4-0-tablet-pc.html
+  * ftp://ftp.ingenic.cn/SOC/JZ4770/JZ4770_DS.PDF
+  * https://github.com/IngenicSemiconductor/X-BOOT_NPM801
+  * https://github.com/gcwnow/UBIBoot
-- 
2.1.4