[PATCH 2/2] eukrea-cpuimx35: refresh configuration

[Sascha Hauer]

On Tue, Sep 23, 2014 at 12:13:35AM +0200, Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric at eukrea.com>
> ---
>  arch/arm/configs/eukrea_cpuimx35_defconfig | 61 ++++++++++++++++++------------
>  1 file changed, 36 insertions(+), 25 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/configs/eukrea_cpuimx35_defconfig b/arch/arm/configs/eukrea_cpuimx35_defconfig
> index 7569cde..4c83102 100644
> --- a/arch/arm/configs/eukrea_cpuimx35_defconfig
> +++ b/arch/arm/configs/eukrea_cpuimx35_defconfig
> @@ -1,71 +1,81 @@
>  CONFIG_ARCH_IMX=y
> -CONFIG_CACHE_L2X0=y
> -CONFIG_ARCH_IMX35=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
>  CONFIG_MACH_EUKREA_CPUIMX35=y
>  CONFIG_IMX_IIM=y
>  CONFIG_IMX_IIM_FUSE_BLOW=y
>  CONFIG_AEABI=y
>  CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_PBL_IMAGE=y
> +CONFIG_PBL_RELOCATABLE=y
>  CONFIG_MMU=y
> -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
>  CONFIG_MALLOC_SIZE=0x800000
>  CONFIG_EXPERIMENTAL=y
>  CONFIG_MALLOC_TLSF=y
> -CONFIG_LONGHELP=y
> +CONFIG_RELOCATABLE=y
>  CONFIG_GLOB=y
>  CONFIG_HUSH_FANCY_PROMPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
> -# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
>  CONFIG_CONSOLE_ACTIVATE_ALL=y
> +CONFIG_DEFAULT_COMPRESSION_LZO=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/eukrea_cpuimx35/env"
> -CONFIG_CMD_EDIT=y
> -CONFIG_CMD_SLEEP=y
> -CONFIG_CMD_SAVEENV=y
> -CONFIG_CMD_EXPORT=y
> -CONFIG_CMD_PRINTENV=y
> -CONFIG_CMD_READLINE=y
> -CONFIG_CMD_AUTOMOUNT=y
> -CONFIG_CMD_ECHO_E=y
> -CONFIG_CMD_LOADB=y
> -CONFIG_CMD_MEMINFO=y
> +CONFIG_LONGHELP=y
>  CONFIG_CMD_IOMEM=y
> -CONFIG_CMD_MTEST=y
> -CONFIG_CMD_FLASH=y
> +CONFIG_CMD_IMD=y
> +CONFIG_CMD_MEMINFO=y
>  CONFIG_CMD_BOOTM_SHOW_TYPE=y
>  CONFIG_CMD_BOOTM_VERBOSE=y
>  CONFIG_CMD_BOOTM_INITRD=y
>  CONFIG_CMD_BOOTM_OFTREE=y
>  CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
> -CONFIG_CMD_RESET=y
>  CONFIG_CMD_GO=y
> -CONFIG_CMD_OFTREE=y
> -CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_RESET=y
>  CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_AUTOMOUNT=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_PRINTENV=y
>  CONFIG_CMD_MAGICVAR=y
>  CONFIG_CMD_MAGICVAR_HELP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MIITOOL=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_TFTP=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_EDIT=y
>  CONFIG_CMD_SPLASH=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_MM=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_DETECT=y
> +CONFIG_CMD_FLASH=y
>  CONFIG_CMD_GPIO=y
> -CONFIG_CMD_UNCOMPRESS=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_LED=y
>  CONFIG_CMD_LED_TRIGGER=y
> +CONFIG_CMD_USBGADGET=y
> +CONFIG_CMD_OFTREE=y
>  CONFIG_NET=y
> -CONFIG_CMD_DHCP=y
>  CONFIG_NET_NFS=y
> -CONFIG_CMD_PING=y
> -CONFIG_CMD_TFTP=y
> -CONFIG_FS_TFTP=y
>  CONFIG_NET_NETCONSOLE=y
>  CONFIG_DRIVER_NET_FEC_IMX=y
> +CONFIG_SMSC_PHY=y
>  # CONFIG_SPI is not set
>  CONFIG_I2C=y
>  CONFIG_I2C_IMX=y
>  CONFIG_MTD=y
>  CONFIG_MTD_RAW_DEVICE=y
>  CONFIG_NAND=y
> +CONFIG_NAND_ALLOW_ERASE_BAD=y
>  CONFIG_NAND_IMX=y
> +CONFIG_NAND_IMX_BBM=y
>  CONFIG_USB_HOST=y
>  CONFIG_USB_EHCI=y
>  CONFIG_USB_STORAGE=y
> @@ -79,6 +89,7 @@ CONFIG_MCI_IMX_ESDHC=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_LED_TRIGGERS=y
> +CONFIG_FS_TFTP=y
>  CONFIG_FS_FAT=y
>  CONFIG_FS_FAT_WRITE=y
>  CONFIG_FS_FAT_LFN=y
> -- 
> 1.9.3
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |